waste processing installation Articles

  • UNTHA waste shredder for one of most state-of-the-art MPS systems in Europe

    MPS Betriebsführungs GmbH, based in Berlin, has been using a UNTHA XR3000R waste shredder since early October. The waste treatment plant, which is jointly operated by the ALBA Group and Berliner Stadtreinigung (Berlin’s municipal waste management company), specialises in the production of alternative fuels, and forms part of one of the most modern plants for mechanical-physical ...


    By UNTHA Shredding Technology

  • Aluminum recycling at Centro Rottami, Italy - Case Study

    Aluminum recycling is particularly important for the Italian economy, which has historically been lacking in raw materials – The showcase of Centro Rottami. Aluminum recycling is particularly important for the Italian economy, which has historically been lacking in raw materials. In fact, as much as 90% of the aluminum produced in the country comes from recycling, and is identical to ...


    By TOMRA Sorting GmbH.

  • Oil Recycling - Case Study

    The problem: Waste oil recycling contributes very much to climate protection through (CO2) energy saving. Compared to the production of base oil the re-refining of waste oil uses 34 % less resources. In the sixties the German government was subsidising the re-refining of waste oil. Because of that the use of waste oil as a fuel was neglected. The used oil re-refining is the ...


    By Dirk European Holdings LTD

  • Scrubber Removes Grease and Particulates from Air Exhaust

    Operating Issue A food-industry leader in Alabama operates several pork-sausage cookers that exhaust over 4,000 ACFM of moisture and pork grease. The operator installed Electrostatic Precipitators (ESPs) to treat the exhaust but these systems performed poorly and generated high maintenance and operating costs. Additionally, these systems were antiquated and required significant capital ...


    By Pollution Systems

  • Optimisation of processes in a two-stage installation for liquid radioactive waste immobilisation

    A two-stage installation for liquid radioactive waste (LRW) immobilisation is intended for LRW reprocessing with the objective to include radionuclides into solid vitreous matrix. Depending on the processing scheme of immobilisation, an installation for LRW immobilisation may include one or more devices. This paper describes a developed mathematical model of a two-stage installation for LRW ...


    By Inderscience Publishers

  • Processing technology for radioactive wastes

    For 20 years now, AVA has been delivering innovative mixers, dryers, and systems for environmental and processing technologies. The treatment of highly contaminated materials has always been one of our core competencies. For more than 10 years, AVA Technology has been applied for the processing of radioactive wastes. The application of AVA mixers and reactors may be divided into two main ...


    By AVA GmbH u. Co. KG

  • Beef Processing Waste Water Treatment

    Industrial Beef Processor Wastewater Treatment Success Story Beef Processing Wastewater Treatment - $80k Saved a Month! First Beef Processing Facility This facility ...


    By Integrated Engineers Inc.

  • Waste recovery and recycling. Process intensification by ABC-100

    Recycling of industrial waste via use of electromagnetic field which is created by ferromagnetic particles is most effective among traditional technologies. ABC-100 or Intensifier of Technological Processes by PC GlobeCore is completely new device designed  for intensification of all chemical anf physical processes. Intensification of physicochemical processes on ABC permit to reach desire ...


    By GlobeCore GmbH

  • Triton boosts municipality treating cheese processing waste

    Pre-treatment with a Triton removed odors from the RBC system and boosted treatment performance Problem This Midwestern USA city upgraded its treatment system over the years. Although it has a population of only 2,700, the town’s cheese processing plant makes their influent equivalent to a city of 50,000. In 1986, a mechanical wastewater treatment plant was constructed to be used in ...

  • Waste Water Recycle/Reuse Project (Industrial Process Waste Waster), India

    Handling Brewery effluents for recycle/reuse and bring that to discharge standard THE CLIENT United Breweries GrouporUB Groupis an Indianconglomeratecompany based in Bangalore United Breweries is India's largest producer of beer with amarket shareof around 48% by volume United Breweries now has greater than a 40% share of the Indian brewing market ...


    By WOG Technologies Inc.

  • Waste to energy – processing waste with a high thermal value to substitute combustibles

    With the taking effect of the TASi (Technical Regulations on Estate Waste) in 2005, non-treated waste must no longer be disposed of and deposited. Commercial and industrial residues with a high thermal value such as rejects from paper industry, punchings from rubber and plastics, and other mono-fractions which are characterized by homogeneity and constant combustible properties through mechanical ...


  • Integrated system for regulatory control of the radioactive waste management in radioactive installations

    The object of this paper is to present the 'Integrated Information System for Supporting the Inventory Control of Radioactive Waste' ? SICORR. The SICORR model considers the following items: the radioactive waste control inventory, encompassing the treatment and integration of the radioactive waste and the radionuclide data and processes; the installations that produce, use, transport or store ...


    By Inderscience Publishers

  • Largest Hofstetter Installation

    Type     HOFGAS®- LPM 7000  Commissioning     2003 Site     Landfill Pinto (ES) SituationOne of the Europe’s largest landfill sites is located in the Pinto region, south of Madrid, where a modern waste treatment and energy recovery system is currently being developed. Urbaser S. A. is implementing a new plant ...


    By Hofstetter BV

  • MBR bioreactor installation courtaulds, china

    Introduction Following a successful on-site trial using a mobile Bioreactor, Microbac has installed a full-scale Microbac Bioreactor unit in a Courtaulds textile plant in China to reduce the Chemical Oxygen Demand (COD) and Biochemical Oxygen Demand (BOD) of the wastewater. Information obtained from the site trial enabled accurate sizing of the full-scale Bioreactor unit to be ...


    By Microbac Ltd

  • Automatic waste wood processing in the production of kitchen worktops case study

    Nolte Küchen GmbH & Co.KG, an established kitchen manufacturer with its registered office in Löhne has commissioned a new production plant for the manufacture of kitchen worktops at their location in Melle early in 2008.The company uses shredders from WEIMA Maschinenbau GmbH in Ilsfeld for processing waste wood accumulating from the manufacturing process in the highly-automated ...


    By WEIMA

  • Diageo installs gem steam traps

    Diageo’s 18-acre Runcorn facility is making savings in energy, replacement costs and maintenance of its steam traps following the installation of Thermal Energy International’s Venturi Orifice GEM traps.  Thermal Energy International (TEI) has installed a total of 71 steam traps through the plant, which has provided Diageo with a payback in less than 12-months. The Diageo Runcorn ...

  • Management of Mining, Quarrying and Ore-Processing Waste in the European Union

    At the request of the Environment Directorate-General of the European Commission, BRGM (Bureau de Recherches Géologiques et Minières) has conducted a study on the management of mining, quarrying and ore-processing waste in the European Union. This project was completed mainly through the use of questionnaire sent to sub- contractors in almost each country of the EU. To assess this information ...

  • Great advances in resource efficiency - recycling nonwoven process waste

    In the past, there has been no simple technical solution for recycling nonwoven process waste, which consists of side trim and reject rolls. They have been sent to landfill or in the best case incinerated for energy recovery. In October 2011, a pair of recycling extruders was installed on the Windsor Locks, CT, USA, spunbond machine producing nonwovens for medical fabrics. The purpose of the ...


    By Ahlstrom-Munksjö

  • The design and installation of the gas collection system

    The designer of gas collection plants has the task to fulfill optimally the important criteria: stability of gas quality efficiency of collection economic viability of the plant The stabilisation of the gas quality helps to solve the problem between the uneven gas production of the landfill on the one side and ...


    By Hofstetter BV

  • Waste not, want not

    New CDE sand washing plant produces high-quality building materials from 50-year-old waste in Estonia’s capital,Talinn Estonian company Paekivitoodete Tehase (Limestone Products) have recently purchased a CDE sand washing plant to process a material that had previously been stockpiled as waste because of its high clay content. As a result, this same material is now being sold to the ...


    By CDEnviro

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you