waste reduction system Articles

  • Transportable Waste Reduction Technology

    Several recent technological innovations have found their way onto Transportable Shredding Systems manufactured by Shred-Tech Inc. Reduction engineers have worked for years to find the right combination of knife material toughness, resistance to abrasive wear and shock load deformation. Shred-Tech’s engineers have found the right combination, which employs state of the art alloy plate and ...


    By Shred-Tech Corp.

  • Designing With Geosynthetic Clay Liners

    In construction, preventing the penetration of liquids and gases is essential to maintaining the integrity of a structure. Often, containment is just as important, especially when dealing with chemical contaminants or other waste. When looking to stop the spread of contaminated liquids and gases, there are few tools as effective as geosynthetic clay liners (GCL). Read on to learn how to design ...


    By Agru America, Inc.

  • What Is Zero Liquid Discharge and How Does It Work?

    Not every industrial facility that produces wastewater will require zero liquid discharge (ZLD). It is usually looked to as a last resort because it can be a complex process that requires a high initial investment. If a facility is located on a site that has severe water scarcity issues and/or astronomical discharge fees, it might be ...


    By SAMCO Technologies, Inc.

  • Low energy mixing to optimize anaerobic digestion at the Kitchener WWTP

    The existing Kitchener Wastewater Treatment Plant (WWTP) is a conventional secondary treatment facility, with a rated capacity of 122,745 mVd. The plant is comprised of two separate secondary treatment plants (Plant 1 and Plant 2) served by a common headworks facilities and primary clarifier facilities. Plant 1 was constructed in the early 1960s and Plant 2 was constructed in the mid-1970s. Both ...

  • How to achieve triple bottom line sustainability benefits on airport runway projects

    CH2M delivers best-in-class sustainable approaches for airport clients worldwide by constantly seeking opportunities to apply sustainable development and design concepts. From planning through plowing, CH2M is leading the development of the most sustainable runway projects in the U.S. Through our life-cycle approach, airport clients have experienced significant benefits such as ...


    By CH2M Hill Companies, Ltd.

  • Fluoride reduction system for the reduction of fluorides from wastewaters

    Client: Major semiconductor fab; Santa Clara, CA. Industry: Semiconductor Manufacturing. Installation Date: May 2001. Objective: To reduce total fluorides and neutralize rinse waters and concentrated bath dumps from the fab area. Criteria and Limitations: Influent flow varies from 5,000 gpd to ...


    By Digital Analysis Corp.

  • Adressing the conflicting priorities of waste reduction and energy development

    Many valuable materials are currently being discarded rather than used productively, and more needs to be done to maximize the value we recover from material streams. Unfortunately, building energy recovery facilities to handle the existing waste load creates a requirement to continue generating the same amount of waste, creating potential problems for plans to reduce waste. Waste is the fuel for ...


    By Waste Advantage Magazine

  • Major waste reduction and recycling success for Severn Trent

    Severn Trent Water have made significant progress in their drive to reduce waste to landfill volumes and increase recycling through the introduction of a processing plant from County Tyrone company, CDE Ireland.The plant, which is provided to Severn Trent Water on a rental contract by Biffa is processing a variety of waste materials and since it has been introduced Severn Trent Water have seen a ...


    By CDEnviro

  • Chemical Use Reduction, Recycling for Packaging, Waste Reduction and Energy Use Reduction: Robert Bosch Australia

     Background Robert Bosch Australia was established in 1954 in Clayton, Victoria. The main manufacturing plant remains there to this day. The company has some 1,150 employees in Australia. Robert Bosch manufactures and distributes a wide variety of products from electronic consumer goods, to industrial hydraulics, to hot water systems. The focus of activity in Australia is ...


  • Size Reduction Equipment Review

    Untitled Document LAST YEAR, BioCycle was approached by CalRecovery, Inc. - a ...


    By BioCycle Magazine

  • Reduction in Water, Energy, Raw Materials and Waste: Queensland Electroplating

     Background Queensland Electroplating Pty Ltd (QE) is a small electroplating factory specialising in the tin plating of bus bars for electric transformers. Small quantities of plating of other metals, such as gold and silver, are also carried out, but because of the toxic heavy metals involved, no chrome plating is done. QE is a company owned and run by an environmentally caring family. ...


  • Waste activated sludge reduction using sonication and cryptic growth

    The management of excess activated sludge imposes great cost on wastewater treatment plants and represents significant technical challenges. This paper investigates a new technology, sonication and cryptic growth, to reduce the amount of excess sludge from the wastewater treatment system. Subsequent Biological Reactors (SBRs) were used for the study. The results show that the amount of excess ...


    By Inderscience Publishers

  • Reduction of Waste from Synthetic Rubber Testing and Unreacted Styrene: Kemcor Australia

     Kemcor Australia has used cleaner production processes to reduce waste from synthetic rubber testing and unreacted styrene in small batch production, with significant cost savings. Background Kemcor Australia is a leader in the production of olefins, poly-olefins and synthetic rubber, and is part of the Altona (Victoria) chemical complex, the largest centre for primary ...


  • Reduction of Waste Fluids by Electrolytical Preflux Treatment: Industrial Galvanisers Corporation

     Industrial Galvanisers Corporation is saving $100,000 per annum in waste fluid disposal costs through greater process control of their hot dip galvanising. The new process, developed by the company’s R&D team, is a continuous electrolytical preflux treatment. It has also delivered quality improvements and other savings by allowing better monitoring of, and hence improvements in, plant ...


  • New system to convert food waste into fertiliser for greenhouse use gives potential 95% reduction in CO2 emissions

    A new method of processing food waste into fertiliser has been outlined in a recent study. The process uses a digester system with microorganisms to break down organic waste into fertiliser. The resultant fertiliser was used in a low-energy greenhouse to produce a range of food crops. The method is a potential way to utilise food waste and reduce the energy consumption of food production as part ...

  • Size reduction of substitute combustibles (RDF)

    The new pilot installation of SITA Wiebe GmbH, Bielefeld/Germany, processes highly calorific commercial and industrial waste to become quality-assured substitute combustibles for cement industry and/or power plants. Basic items of this ultra-modern processing installation are two one-shaft size reduction machines of type WLK 30 Super-Jumbo of WEIMA Maschinenbau GmbH, Ilsfeld. The total output of ...


  • Linking environmental management systems with cost reduction in enterprises: an analysis of managerial responses

    The goal of this research is to find if and what types of costs have been reduced as a result of implementing environmental management systems and of what significance it was to the firms involved. The research suggests that one-third of the enterprises polled have managed to reduce costs. In most cases the reductions pertained to the costs of waste management as well as energy and water ...


    By Inderscience Publishers

  • The reduction of greenhouse gas emissions using various thermal systems in a landfill site

    In this paper, the Greenhouse Gas (GHG) emissions from an uncontrolled landfill site filled with Municipal Solid Waste (MSW) are compared with those from controlled sites in which collected Landfill Gases (LFG) are utilised by various technologies. These technologies include flaring, conventional electricity generation technologies such as Internal Combustion Engine (ICE) and Gas Turbine (GT) and ...


    By Inderscience Publishers

  • Reduction in Solvents for Cleaning: Amcor Packaging (Australia)

    Background Amcor Cartons, a manufacturer of folding cartons and paperboard packaging is a 13 million dollar operation employing 60 staff. In keeping with Amcor Cartons’s commitment to respond to customer needs through the application of the highest technology, advantage was taken of the latest available technology when deciding to upgrade their printing press. After installing a new ...


  • Methane emissions reduction from organic wastewater and solid waste co-composting: parameter estimation and sensitivity analysis

    Using the approved large scale methodology AM0039 and approved baseline methodology AM0010, an estimated 7,329.04 tCO2e/yr are typically generated from degradation of organic wastes at the landfill in Mauritius. Baseline emissions for anaerobic degradation of organic wastewaters (OWW) in open lagoons approximated to 36,036 tCO2e/yr; 402,783.92 tCO2e/yr for transportation of OWW and municipal ...


    By Inderscience Publishers

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you