waste separation plant Articles

  • Reasonable waste digestion plants

    During the last years it became quite clear that in the area of utilisation of organic waste the anaerobic digestion has developed a leading position. This is not only based on its well known advantages:- abhigh rate degradation of organics- abcontained process- ablow emissions- abhigh yield of CO2-neutral produced biogas and high quality compost as its productsbut also on the fact that customers ...


    By ORBIT e.V.

  • Converting plant waste into biofuels

    Promising advances using yeast and fungi. Written by Nancy W. Stauffer. You can read the original story in MIT News MIT researchers are genetically engineering yeast to break down stubborn plant fibers into sugars that it can then ferment — a first ...

  • The Power to Separate

    Gravity separators are effective and economical tools used to process wastewater and stormwater by removing pollutants such as sediment, hydrocarbons and debris through the process of sedimentation or flotation. Most separators have few or no moving parts, are easy to maintain and have a successful history of use in many different industrial, commercial and residential applications. Specifying ...


    By BaySaver Technologies, Inc.

  • Building waste and ballistic separator - a worthwhile matter

    Efficient sorting for sustainable recycling instead of just pure disposal. That is the motto for dealing with building waste.  What do you understand by the expression building waste? This is a collective expression for the diverse types of waste that occur on building sites. This includes mixtures of mineral and non mineral materials (e.g. stone mixed with wood, sheets of ...

  • Pre-separation of household plastics from EfW plant in-feed case study

    Challenge: Client tendering for large scale Energy from Waste (EfW) facility. Axion asked to provide separation and sorting of plastic fractions in residual household waste. Axion Solution: Axion evaluated volume and mix of plastics in the target waste stream. Modelled range of plant options to remove and separate ...

  • Re-location and re-design of non-ferrous separation plant case study

    Challenge: Old plant using eddy current separators for non-ferrous waste. System was underperforming and needed to be moved. Axion Solution: Axion redesigned new plant layout using existing ECS units and adding one reconditioned unit. Plant rebuilt using 35% scrap materials. On-site performance tests ...

  • Sorting plants for industrial waste, location: south of Germany

    Task Separation and sorting of industrial and building site waste as well as bulky refuses. Potential recyclables such as wood, paper, plastics, metals and aluminium shall no longer be sent to garbage incineration, but can be recycled after the sorting into different material fractions. Solution Conception and realisation of a complete  industrial waste ...


  • Environmental efficiency of composting versus anaerobic digestion of separately collected, organic waste

    Environmental policy in the Netherlands among others aims at closing material cycles and minimising the amount of waste requiring final disposal. In this policy the highest priority is given to the prevention of waste production followed by (in descending order of preference) reuse, incineration with energy recovery and sanitary landfilling. In the implementation of this solid waste policy also ...


    By ORBIT e.V.

  • Rest or mixed waste sorting-digestion-separation for the recovery of recyclables and energy

    Source separate collection of biowaste has been implemented in many countries in Europe, especially in the German- speaking countries and the Benelux. By separating the biowaste fraction, a waste fraction called rest waste or grey waste is left over. This fraction is in most instances landfilled or incinerated. However, rest waste still contains a considerable amount of organics (up to 65%) which ...


    By ORBIT e.V.

  • Waste water plant struggles with contamination case study

    A plant in the southwest US commissioning a wastewater plant utilizing proprietary technology for the removal of benzene, toluene, and xylene, or BTX, was experiencing challenges with throughput and elevated operational costs due to the presence of particulate contaminants. The plant takes the wastewater and processes it, removing the BTX prior to being fed to the conventional wastewater plant. ...

  • Plastics Separation In Compost

    Operators say their number one contamination problem is plastic small, large and in-between - in the compost feedstock and thus in the end product. New study and equipment offer some excellent solutions. An air separation unit from Hawker Corp. is attached to the outfeed conveyor of a screen. Plastic is collected in a tube sock (inset) attached to the fan assembly. PRESSURE in Europe to increase ...

  • From Waste in Anodising Plant to New Chemical Product in Sewage Treatment Plants

    Aluminium containing caustic soda used as a pickling agent in the pre-treatment of aluminium before anodising and aluminium containing sulphuric acids used as electrolytes for the formation of oxide layers in anodising plants can be utilised in municipal sewage treatment plants to reduce phosphates and improve precipitation. From the anodiser's point of view, these products are spent once they ...


  • How to build waste plastic pyrolysis plant

    Preparation of raw material: The raw material can be waste tire, tyre, plastic or scrap rubber. All if the above wastes can be processed by our machine. The following are details: Separate the ingredient which can not be refined from waste plastic, such as: soil, wood, stone, brick etc. If the raw materials are paper mill’s waste, separate the pulp. If there is water in raw material, should ...


  • Dynamic restructuring of waste removal in decentral plants

    The mechanical and biological treatment of residual waste meets the requirements for the production of defined material flows out of nonspecific waste. The specific material flows can reach the quality demands of the industry by wet screening, when beforehand the result of composting is a far-reaching biological stabilisation of the residual waste. Three fractions can be separated: recyclable and ...


    By ORBIT e.V.

  • Plastics Separation in Compost

    Untitled Document Operators say their number one contamination problem is plastic - small, large and in-between - in the compost ...


    By BioCycle Magazine

  • Waste plastic recycling plant with high technology

    Company Profile: Waste plastic pyrolysis plant, with the superiority of low capital investment and high fuel financial price, it has become the first preferred waste disposal method in many countries.This profitable project was established every week with low labor costs and high profits. Huayin renewable energy equipment company, established in 1993,have been a leader of oil pyrolysis ...


  • Zero impact separate waste collection with donkeys and recycling food waste with Big Hanna composter in Italy!

    Montalto Ligure, a small village with about 365 inhabitants, situated in the Riviera Ligur's hinterland (North East Italy), an almost untouched place (difficult to reach and cross by 'normal' means of transport) said 'Enough!' to compactors and dumpsters.  ...


    By Susteco AB

  • Source Separated MSW Composting in the US

    MUNICIPAL solid waste composting projects are being launched based on residential separation of the compostable stream from recyclables and trash - quite widespread in Europe and increasingly in Canada. One trend - typically in cities and suburban communities - is to add source separated residential organics to existing yard trimmings collection programs. Composting facilities permitted to ...


    By BioCycle Magazine

  • Source separated residential composting in the US

    THE Field of Dreams movie theme, “if you build it they will come,” is definitely à propos to source separated residential organics composting. While conducting this year's survey, we asked program managers what they think the key ingredients are to offering households the ability to divert more than just yard trimmings at the curb - a practice that is widely adopted in some Canadian provinces and ...


    By BioCycle Magazine

  • Redwave - separation of transparent and white HDPE

    REDWAVE - sensor based sorting machines - optimise the separation of recyclable plastic materials: Upon customer request the separation of transparent and white HDPE bottles has been realized for the first time in a sorting plant. It is a challenging task as hardly any difference can be detected in the colour spectrum between transparent and white bottles. In ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you