waste separation wood Articles

  • Wood waste product

    A landfill needed a way to reduce their waste stream volume, increase the life of their landfill, and recover a recyclable, marketable product. Wood and yard waste material comprise up to 20% of their entire waste stream volume. Processing and recycling this material will extend the life of the landfill by 20 years. They chose WSM's Model 4864BH Horizontal Hogging System with a customized feed ...

  • Wood waste market in the UK

    The purpose of this project was to undertake both market and economic assessments for wood waste in the UK. The two sections of this report are described separately below. This section first identified gaps in wood waste estimates and then presented an approach for closing identified gaps. A review of current publicly available literature confirmed that there are a range of estimates available ...

  • Simple Separation: Diverting Wood And Cardboard at Construction Sites

    Diverting Wood And Cardboard At Construction Sites Residential home construction in Wisconsin generates 128,000 tons of residuals annually, according to a 1998 study by Camp, Dresser & McKee. Ten builders are participating in a project to demonstrate how easily major components of this waste stream can be recycled. The Metropolitan Builders Association (MBA) of Greater Milwaukee, the ...


    By BioCycle Magazine

  • Plastics Separation in Compost

    Untitled Document Operators say their number one contamination problem is plastic - small, large and in-between - in the compost ...


    By BioCycle Magazine

  • Lindner`s Waste Wood Days 2019 - Case Study

    The future of waste wood processing for combustion purposes: Lindner showcased highly effective system solutions for efficient fuel production in line with ISO 17225-1. The correct recovery of waste wood is a significant step towards protecting the environment. What’s more, with their highly productive processing technologies, Lindner can transform this into a profitable ...


    By Lindner-Recyclingtech GmbH

  • Less fines improves productivity in waste wood shredding - Case Study

    A customer in France was shredding waste wood with two Doppstadts. After processing the wood twice, up to 20% of the total outcome was worthless fine wood dust. With TANA Shark the problem with the dust was eliminated and productivity of the process was improved respectively. Steady burning process in a heating unit requires pure wood particles ...


    By Tana Oy

  • Plastics Separation In Compost

    Operators say their number one contamination problem is plastic small, large and in-between - in the compost feedstock and thus in the end product. New study and equipment offer some excellent solutions. An air separation unit from Hawker Corp. is attached to the outfeed conveyor of a screen. Plastic is collected in a tube sock (inset) attached to the fan assembly. PRESSURE in Europe to increase ...

  • Teesside Waste Wood-Fired Plant Port Clarence, England - Case study

    The project developers Eco2 and Temporis Capital secured the site and planning consent to develop the Teesside biomass facility in Port Clarence. Following engagement on Eco2’s Margam biomass project in South Wales, Babcock & Wilcox Vølund working with Lagan Construction Group were awarded an ...


    By Dürr Megtec LLC

  • Las Vegas DirtWorkz, Inc.: Using the City’s wood waste to farm the desert

    Ray Becerra knows a thing or two about recycling, reusing and repurposing waste materials. You might even say it’s in his blood. Becerra has spent his entire life around landfills and farming operations, and he wears his passion for recycling waste materials on his sleeve. His enthusiasm for dust, dirt and debris, says Becerra, comes from his father, an avid recycler who was involved in the ...

  • Turning wood chips and sawdust into a valuable solid fuel

    RUF briquetting units are the economical solution for the processing of wood chips and sawdust. Where timber is planed, turned and sanded, manufacturers end up with large quantities of wood chips and sawdust. By briquetting this material, you can recover a valuable solid fuel. Where large quantities are produced, the single briquette pressing system developed by RUF GmbH is the most economical ...

  • Study on Hazardous Household Waste with a main Emphasis on Hazardous Chemicals

    Introduction The aim of this study is to evaluate national experiences of the management of hazardous products likely to become hazardous household waste (HHW), and to make proposals for strategies for the appropriate management of such products within a lifecycle perspective. The study covers the fifteen Member States and two Accession Countries, namely Hungary and Romania. The data available at ...

  • Dynamic restructuring of waste removal in decentral plants

    The mechanical and biological treatment of residual waste meets the requirements for the production of defined material flows out of nonspecific waste. The specific material flows can reach the quality demands of the industry by wet screening, when beforehand the result of composting is a far-reaching biological stabilisation of the residual waste. Three fractions can be separated: recyclable and ...


    By ORBIT e.V.

  • Heavy Metals in Waste

    Untitled Document Summary and discussion The aim of this report has been to demonstrate the existing knowledge regardng the harmful effects of heavy metals, the ...

  • What`s Hiding in Your Waste Piles?

    In over 25 years in the grinding and recycling industry, we’ve learned that there’s always more than meets the eye in a pile of waste materials. Whether it’s a pile of pallets or household garbage, there’s some good and some bad hiding under the surface. It's there if you know how to find it. You can find it with the right industry knowledge, the right equipment, ...


    By Rotochopper, Inc.

  • Landfill grinding system

    A landfill needed a way to reduce their waste stream volume, increase the life of their landfill, and recover a recyclable, marketable product. Wood and yard waste material comprise up to 20% of their entire waste stream volume. Processing and recycling this material will extend the life of the landfill by 20 years. They chose WSM's Model 4864BH Horizontal Hogging System with a customized feed ...

  • Study Charts a Future for Waste-Derived Fuels

    Pointers to possible future EU policy initiatives to give co-incineration facilities burning waste-derived fuels a strategic role in waste management have emerged in a study for the European Commission.1 The report suggests a policy focus on promoting source separation of municipal wastes, active discouragement of mass burn incinerators, and a levelling of the regulatory playing-field for ...

  • Turnkey Manufacturer & Supplier of Large scale Waste Plastic & Tire Pyrolysis Plant Machinery

    We establish large scale pyrolysis plants on turnkey basis. The total turnkey supply includes of machinery designing & simulation, equipment manufacturing, supply, installation, commissioning, technology transfer and operational training. We are one of the prominent leaders in establishing pyrolysis plants on turnkey basis.   Advantages of pyrolysis plants manufactured & ...

  • Unpacking and cleaning of waste materials in Ribeauvillé (France) - Case Study

    Location: Ribeauvillé (France) Capacity: 1,4 MWel Input materials: Cattle slurry, renewable resources, waste materials from the food industry Features: Separate hygienisation plant with a capacity of 25,000 t/a. The biogas plant AGRIVALOR ENERGIE The project was initiated by 3 farmers ...


    By EnviTec Biogas AG

  • Moisture measurement with M-Sens 2 - Case Study

    Application A manufacturer of wood pellets processes raw material such as planing chips or wood chips (wood waste) to make wood pellets. After delivery of the wood waste, it is cleaned from extraneous material like metal and stones by a separator. Afterwards the material is crushed by a hammer mill and then dried. The crushed material is then transported by a conveyor belt ...


    By ENVEA

  • Hol’z dir! Sustainable briquette manufacture in the Augustinuswerk Jessen case study

    Since only very recently the Augustinuswerk in Jessen has been producing wood briquettes under its own brand name of “Hol’z dir” in a separate workshop for the handicapped. Only machines from shredder specialist WEIMA are used for production, their own production facilities being only a few kilometres away in Großnaundorf. It is very busy here. Every day 3,000 wood ...


    By WEIMA

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you