wastewater influent monitoring Articles

  • Seasonal and influent characteristic effects on hydrogen sulfide generation at a water reclamation plant

    Correlations between sulfide generation and seasonal influent wastewater characteristics were identified based on a long-term monitoring program in summer and winter at a water reclamation plant. During summer, the emission rates of hydrogen sulfide (H2S) from the liquid treatment processes increased substantially compared to those during winter due to the increased wastewater temperature. The ...


    By IWA Publishing

  • Modelling real-time control of WWTP influent flow under data scarcity

    In order to comply with effluent standards, wastewater operators need to avoid hydraulic overloading of the wastewater treatment plant (WWTP), as this can result in the washout of activated sludge from secondary settling tanks. Hydraulic overloading can occur in a systematic way, for instance when sewer network connections are extended without increasing the WWTP's capacity accordingly. This ...


    By IWA Publishing

  • Rapid quantification of bacteria and viruses in influent, settled water, activated sludge and effluent from a wastewater treatment plant using flow cytometry

    As microbiological parameters are important in monitoring the correct operation of wastewater treatment plants and controlling the microbiological quality of wastewater, the abundances of total bacteria (including intact and damaged bacterial cells) and total viruses in wastewater were investigated using a combination of ultrasonication and flow cytometry. The comparisons between flow cytometry ...


    By IWA Publishing

  • Wastewater Level Measurement Techniques

    Level monitoring and control is a fundamental requirement in any wastewater treatment process. You will find level instrumentation installed at even the simplest treatment plants for pump control, chemical storage tanks and process level controls or alarms. Operators have only limited or emergency control over treatment plant influent, so level controls and instrumentation play an important role ...


    By Greyline Instruments Inc.

  • The natural way to clean wastewater

    John Todd founded Ocean Arks International in the 1980s, where he started to experiment with processes that mimic natural ways to purify wastewater. He built a greenhouse and ran sewage through a series of tanks, with plants suspended in the flowing waters, and constructed marshes made of sand and gravel. No chemicals were added, but plenty of aquatic creatures from snails to small fish were ...


    By BioCycle Magazine

  • TOC monitoring upstream of paper mill wastewater treatment facility using online TOC analyzer

    At wastewater treatment facilities of various types of manufacturing plants, pollution load monitoring (upstream monitoring) is becoming increasingly important to ensure appropriate and stable operation and water pollution accident prevention. Pollution load varies depending on the operating status of the plant, so continuous monitoring is essential. Continuous and stable ...

  • Application Focus: Biological Wastewater Treatment

    In knowing the size and health of the active biomass population in a wastewater treatment process, cause-and-effect relationships can then be established with process variables. If a change in the process is beneficial or detrimental to the population, ATP results will indicate to what degree the population is helped or harmed by the change. Since ATP measurements isolate the living population, ...


    By LuminUltra Technologies Ltd.

  • Monitoring benzotriazoles: a 1 year study on concentrations and removal efficiencies in three different wastewater treatment plants

    Benzotriazole (BTri), 4- and 5-tolyltriazole (4-TTri, 5-TTri) were monitored over 1 year in three wastewater treatment plants (WWTPs) with a membrane bioreactor (MBR-MH) and two conventional activated sludge systems (CAS-E, CAS-M). The influent/effluent concentrations and treatment stages removal efficiencies were monitored. 5-TTri was removed best (mean removal 80%) in the WWTP mainly by ...


    By IWA Publishing

  • Wastewater-Primary Treatment

    Primary Treatment is defined as a wastewater treatment process that takes place in a rectangular or circular tank and allows those substances in wastewater that readily settle or float to be separated from the water being treated. This process achieves solids separation. The solids readily available to settle to achieve sedimentation will do so in a settling tank referred as a clarifier. On the ...

  • Optimizing Wastewater Treatment

    ' Growing volumes of both industrial and municipal wastewater are being discharged to surface waters but the treatment provided frequently is inadequate to protect the desired uses of the receiving waters. With limited resources in terms of both institutional capacity and finance, governments face difficult choices in optimizing their investments in municipal systems and establishing practical ...


    By The World Bank

  • Organics Monitoring: A Practical Guide

    Preventing product loss, lowering waste treatment costs, and reducing system maintenance and energy consumption through organics monitoring in the chemical, refining, food, and wastewater treatment industries. Summary Process water and steam condensate contamination includes organic, inorganic, and biological components. Sources of organic contamination include process ...


    By GE Analytical Instruments

  • Assessing Upstream Process Changes with ATP Monitoring

    While the Biomass Stress Index (BSI) parameter is most often used to reveal when a biological population has been subjected to toxicity, it can also indicate when an upstream change has relieved a stressful condition. In this month’s featured case study, a pulp & paper wastewater treatment plant made a change to its papermaking process that changed the properties of the wastewater ...


    By LuminUltra Technologies Ltd.

  • BLOOM – Real-Time Monitoring Brief - Case Study

    PeCOD® is a patented technology that can determine COD by measuring photocurrent charges originating from oxidation of the organic contaminants present in a water sample. Three PeCOD® analyzer units were implemented at three different facilities, representative of key food and beverage sub-sectors–a winery, a bakery and a brewery–to undertake “real-time” ...


    By MANTECH INC.

  • Corrugating Facility Redesign Wastewater Optimization Case Study

    Paper & Pulp Industry Case Studies Corrugating Facility Wastewater Optimization Integrated Engineers, Inc. modified a corrugating facility in Southern California that required a design build ...


    By Integrated Engineers Inc.

  • OCF 5.0 open channel flow monitors - monitor infulent at Long Sault WWTP plant

    Greyline Open Channel Flow Monitors were installed at the Wastewater Treatment Plant in Long Sault, Ontario when the SBR plant was originally commissioned in 1995. But after 16 years of continuous service, components for the old models became obsolete. Plant operators Caneau Water and Sewage Inc. decided to replace the instruments and new Greyline OCF 5.0 Open Channel Flow Monitors were installed ...


    By Greyline Instruments Inc.

  • Pathogenic parasites and enteroviruses in wastewater: support for a regulation on water reuse

    Brazilian regulations for nonpotable reuse are being established using World Health Organization guidelines, however, they should be developed based on local monitoring studies. This study intended to analyze enteroviruses, protozoa and viable Ascaris sp. eggs in raw (24) and treated (24) effluents from four Wastewater Treatment Plants of São Paulo State, Brazil. The protozoa were ...


    By IWA Publishing

  • ORP and pH Based Control of SBR Cycles for Nutrient Removal from Wastewater

    ABSTRACTContinuous monitoring of multiple process functions were conducted involving removals of BOD, TSS and nutrients, in each cycle of the SBR reactor at the wastewater treatment plant of the City of Carrabelle, FL. On line, real time, monitoring of pH, oxidation reduction potential (ORP), dissolved oxygen (DO), ammonia-N, nitrite-N, nitrate-N and orthophosphate-P demonstrated excellent ...

  • Portable Monitoring Instruments Solve Flow Rate Mystery

    The Glen Walter Sewage Collection System was built to service 1080 customers in 1989. At the time the population was 850 but by 1995 the sewage treatment plant had already reached capacity. Shawn Killoran took over the Operations Manger position in 1999 and, along with the Mayor and Council, he immediately had concerns about the excess flow. The Township started by video taping all of the lines ...


    By Greyline Instruments Inc.

  • A molecular imprinted polymer based sensor for measuring phosphate in wastewater samples

    Phosphate detection in water samples is still completed using colorimetric standard methods, which have a number of disadvantages, to such as being time consuming, requiring filtration, a number of different reagents, frequent calibration and proper disposal of waste chemicals generated. Hence, a simple cost effective analytical method and instrumentation is highly desirable to aid the ...


    By IWA Publishing

  • Removal of phthalates and pharmaceuticals from municipal wastewater by graphene adsorption process

    In this work graphene was used for evaluation of its adsorption behavior and performance in removing phthalate esters and pharmaceuticals in municipal wastewater. Di-n-butyl phthalate (DnBP), di-(2-ethylhexyl) phthalate (DEHP), acetaminophen (ACE), caffeine (CAF), cephalexin (CLX), and sulfamethoxazole (SMX) were emerging contaminants (ECs) with detection frequencies over 92% in a one-year ...


    By IWA Publishing

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you