water ammonia monitoring real-time Articles

  • Real-Time Control Optimizes Extended Aeration Processes

    The population of Hillsborough County, Florida has doubled since the Valrico advanced wastewater treatment plant (AWTP) was built in 1990 to treat the sewage of several small communities west of the City of Tampa. When it began operation, the Valrico AWTP capacity was only 4 MGD; small when compared to Tampa's 96 MGD Howard F. Curren AWTP located not far to the east. But Valrico serves as a very ...


    By ASA Analytics

  • A short-term investigation using In-situ ammonia monitoring at a WWT, M Keown Severn Trent Water

    Summary: Two separate inlet streams are received for treatment at this works, one being predominantly domestic in origin and the other being predominantly industrial, arising from a local dye works. Their treatment is kept completely separate with municipal stream being subject to preliminary treatment, primary settlement, and secondary treatment in surface aerated activated sludge ...


    By Envitech Ltd.

  • Mohawk Laboratories has acquired Strathtox providing greatly improved `real-time` studies

    Mohawk Laboratories, the research and development arm of NCH Corporation, has acquired Strathkelvin’s latest respirometer, StrathtoxTM, resulting in greatly improved ‘real-time’ bioremediation potential efficacy studies for its BioAmp system. This allows NCH to provide quick study results to its customers and potential customers in determining whether or not the bacteria ...

  • Online Odors Monitoring in Waste Water Treatment Plants

    Odors are very distinct air contaminants as they generate nuisances (see note at the end). The factors playing a role in the determination of odor annoyance are : odor concentration and intensity, frequency, appreciation, duration, synergy and location. Chromatotec proposes an automated solution to well identify the origin and the level of odors. Technology Description We offer a ...


    By Chromatotec Group

  • Minimizing ammonia consumption in DeNOx plants – Case Study

    Flue gas denitrification Combustion processes result in emissions that can be harmful to the environment, in particular carbon dioxide (CO2), sulfur dioxide (SO2), nitric oxides (NOx), and dust. Therefore, measures are implemented in power stations and other plants comprising combustion processes to reduce emissions. For flue gas denitrification, besides front-end primary ...

  • Low-pH Ammonia Oxidation at a Biological Nutrient Removal Facility

    ABSTRACTMcAlpine Creek Wastewater Management Facility (MCWWMF), owned and operated by Charlotte Mecklenburg Utilities (CMU) of Charlotte, North Carolina, is permitted to treat 64 million gallons per day (mgd). Along with MCWWMF, three CMU treatment plants discharge effluent into the Catawba River just upstream of the South Carolina border. CMU worked with North and South Carolina regulators ...

  • Monitoring Environmental Quality

    ' In order to determine the effectiveness of actions to improve environmental quality it is necessary to be able to measure relevant environmental parameters at a level of detail which is accurate enough to distinguish the anticipated changes. However, the establishment and maintenance of monitoring systems is time-consuming and expensive and therefore the scale of such systems needs to be kept ...


    By The World Bank

  • Monitor Volatile Organic Compounds (VOC’s) with PPM Technology’s IAQ Monitor

    Volatile organic compounds (VOC’s) are emitted as gases from certain solids or liquids. VOCs include a variety of chemicals, some of which may have short- and long-term adverse health effects. Concentrations of many VOCs are consistently higher indoors (up to ten times higher) than outdoors. VOC’s is one of numerous sensor options that can be incorporated into PPM Technology’s ...


    By PPM Technology

  • Water Quality Models

    ' In order to determine the impacts of a particular discharge on ambient water quality, it is usually necessary to model the diffusion and dispersion of the discharge in the relevant water body. The approach applies both to new discharges and to upgrading of existing sources. This note provides guidance on models that may be applicable in the context of typical Bank projects.' Introduction ...


    By The World Bank

  • Why are we monitoring nutrients at different depths?

    Recently, LG Sonic introduced the MPC-Lab, an innovative monitoring buoy that can monitor algae, physico-chemical variables, and even nutrients such as nitrogen and phosphorus in near real-time and at different depths in a body of water. Combined with our other monitoring tools, this system offers a unique way to detect the spatial and temporal patterns of nutrient concentrations which play a ...


    By LG Sonic

  • Using UV Fluorescent Technology to monitor for organic pollutants

    For many years the water industry has relied on traditional sampling techniques to monitor water quality in a wide range of environments. Traditional tests such as BOD, PH, Dissolved Oxygen and Ammonia have formed the bedrock of monitoring parameters. There are however other ways to establish water quality and UV fluorescence offers an up to date solution for the investigation of ...

  • Online Process Analyzer Installed at F.J. Horgan WTP to Monitor Chloramination

    Construction was completed on the City of Toronto's F.J. Hor-gan Water Treatment Plant in 1979, more than 60 years after chloramine had first been used to disinfect drinking water in an Ottawa plant. By then there was little debate about the benefits of chloramination and it was incorporated into the new plant's design as part of the disinfection process. Chloramine is more stable than free ...


    By ASA Analytics

  • Major waste management company and cbio combine resources, to resolve a breach of ammonia consent, in a large wastewater treatment plant case study

    The WWTP itself is located in the East Midlands, and treats dairy waste from a large processing plant, treating c1,500m3 of effluent per day. On 30th July the ammonia (NH3) levels in the permeate from the MBR at the plant began to increase. The effluent plant discharges to a river and as such, the consent limit is stipulated by the Environment Agency at 4mg/l. Within three days, the ammonia ...


    By Cleveland Biotech Ltd.

  • Reliable silica monitoring supports power station efficiency

    West Burton B CCGT is a Combined Cycle Gas Turbine power station near Nottingham in the UK. It has three open-cycle gas turbines capable of generating enough electricity for approximately 1.5 million UK homes. In common with all combustion based power stations, the CCGT has a requirement to monitor silica levels in the Plant’s water and steam processes. Sean Todd, the Plant’s Control ...

  • Major waste management company and cleveland biotech combine resources to resolve a breach of ammonia consent in a large wastewater treatment plant case study

    The WWTP itself is located in the East Midlands, and treats dairy waste from a large processing plant, treating c1,500m3 of effluent per day. On 30th July the ammonia (NH3) levels in the permeate from the MBR at the plant began to increase. The effluent plant discharges to a river and as such, the consent limit is stipulated by the Environment Agency at 4mg/l. Within three days, the ammonia ...


    By Cleveland Biotech Ltd.

  • The Benefits of Biological Treatment for Drinking Water

    The biological treatment of drinking water is undertaken using both organic and inorganic contaminants, and can be used to treat groundwater and surface water. These contaminants, contrary to what the name implies, are applied to strip away the factors that make the water unsafe for drinking until it is potable—meaning drinkable. If you would like to learn more about the benefits of ...

  • Water quality is key to the success of Cardiff Bay

    Water quality has been a central theme in a redevelopment project that began with the creation of the Cardiff Bay Development Corporation in April 1987. This article will examine the role that water quality has played in the remarkable transformation that has taken place in Cardiff and explain how monitoring technology has developed to the stage whereby any person, anywhere in the world, can view ...

  • NH3 Slip Monitoring in Fluidized-bed Catalytic Cracking Using the LDS 6 Gas Analyzer – Case Study

    Fluidized catalytic cracking (FCC) units are used in refineries to convert low value heavy oils into more valuable lighter compounds. Cracking units are sources of emissions of pollutants (e.g. NOx) and must comply with concentration permits set by local or federal authorithies. Modern technologies are applied to reduce the content of pollutants and to monitor certain gas compounds (here: NH3) in ...

  • Some information about Genesis Water Technologies and its benefits

    Water and air are the two essential and precious gifts of Mother Nature to the humans. All the living species depend on these two natural offerings and it is up to the humans to make optimal efforts to conserve both of these elements before their purity deteriorates to the extreme level that they are not healthy anymore for consumption. The quality of water is highly critical for the current ...

  • Toxicity Identification Evaluation (TIE) as a Tool for Water Quality Management

    Whole effluent toxicity (WET) testing has evolved into a critical element of many National Pollutant Discharge Elimination System (NPDES) permits issued to both industrial and municipal dischargers. Over 6,500 dischargers to both fresh and salt waters are required to conduct toxicity tests to determine if their effluent might be potentially toxic to organisms in the receiving system. While ...


    By AECOM

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you