water control equipment Articles

  • Human Error Threatens Safety in Hazardous Areas

    The top 5 problems identified in hazardous areas are Poor or no maintenance on flameproof (Ex d) enclosures. Due to corrosion—especially when equipment is installed outdoors—the Ex d protection is gone 2-3 years after installation. Incorrectly installed Ex d cable glands. Even if the combination of cable and gland is chosen correctly, the instructions on how to ...


    By Mettler - Toledo Int. Inc

  • UV Minimises Risks for Major Food Retailers

    For many years, one of the UK’s largest food manufacturers has made it their business to be the best at producing all manner of bespoke cooked and raw, ready-to-eat vegetables and carbohydrates for their customers, who include chilled food manufacturers, food-to-go operators and, of course, major supermarkets. Being the best means not only complying with food quality standards set by ...


    By atg UV Technology

  • The benefits of monitoring compressed air

    Compressed air is used in many manufacturing processes for many different reasons, from the actuation and control of pneumatic valves and cylinders to the operation of process machinery and tooling. It can also be used as a transport medium for bulk materials or as a purge gas. For all its uses it is nonetheless expensive. This is why, through detailed monitoring, a business can enjoy the ...


    By Contrec Europe Limited

  • Avondale Foods effluent treatment - Case Study

    Introduction Avondale Foods (Craigavon) Ltd. is one of the UK's leading manufacturers and suppliers of coleslaw, wet salads, side salads, vegetable accompaniments, soups, sauces and mayonnaise to retail and foodservice customers throughout Britain and Ireland. The company has a team of over 380 people working in its state-of-the-art facility, with all products being manufactured on the ...


    By Water Tecnik Ltd.

  • Pressure Washing Equipment for Temperature Control

    Pressure washing equipment with heating capabilities has one advantage over non-heated pressure washing equipment. These machines can use hot as well as cold water. Therefore, when purchasing pressure washing equipment, it is always a good idea to purchase machines that allow for temperature control. Hot Water Applications Hot water cleans where cold water cannot. Heat acts on ...


    By Daimer Industries Inc.

  • Temperature Control of Experiments and Equipment – how do you keep your cool?

    Maintaining a constant temperature is vital in many processes to ensure consistency and safety, however this can be difficult in a working environment. Cooling systems might be used to keep a reaction or piece of equipment below room temperature, but they are also employed to remove excess heat generated by the system to give a constant temperature which might be at, or even above, the ...


    By Camlab Limited

  • Phosphorus control protects surface waters

    Phosphorus is the decisive factor for excessive algae and plant growth in water bodies, that’s why quality standards require reductions in the amount of phosphorus released from wastewater treatment plants into rivers and lakes. In recent years, the outlet limit values have not only been reduced on national levels. Depending on the vulnerability of ecosystems, especially low target values ...


    By Endress Hauser

  • Silicone converter succeeds with custom air pollution control equipment - Case study

    Many industries utilize silicone as an ingredient in their manufactured product. Silicone enhances the attributes of the product or helps to improve production characteristics. Whatever the reason may be, users of solvent borne silicone's all face very troubling issues when it comes to the selection of the right air pollution control system. Among the air pollution control choices available to ...

  • Size Reduction Equipment Review

    Untitled Document LAST YEAR, BioCycle was approached by CalRecovery, Inc. - a ...


    By BioCycle Magazine

  • Five of the Best Cooling Tower Water Treatment Equipment Supply and Technology Companies

    Here at SAMCO technologies, our custom-engineered, cutting-edge solutions for your cooling tower water treatment needs have been developed by helping our customers solve some of the most complex purity and separation issues globally for over 40 years. Because of our skilled engineers and overall expertise in cooling tower water treatment, we are confident that our solutions are some of the best ...


    By SAMCO Technologies, Inc.

  • Controlling scale in water systems helps prevent legionella

    The Legionella bacterium, Legionella Pneumophila (LP), the fundamental agent of Legionnaire’s Disease, is a water-based organism, which causes infection when inhaled in an aerosol form. Legionnaires' Disease acquired its name in 1976 when an outbreak of pneumonia occurred among persons attending a convention of the American Legion in Philadelphia. Later, the bacterium causing the illness ...

  • Don’t Let Your Control System Control You

    Regular maintenance ensures valves remain healthy. If your system is operating properly, you should physically inspect all valves at least every 12 weeks to check for tubing leaks and other abnormalities. Pressure gauges should be checked to ensure each valve is performing as designed. If you find something wrong, refer to the appropriate instruction manual, which may be available online. Because ...


    By Singer Valve Inc.

  • Corrosion resistant FRP reduces maintenance issues for water and wastewater treatment and control

    At this Wastewater Treatment Plant in Glendale Heights, IL, an aluminum slide gate had to be forced open using a front-end loader and a chain after seizing in place due to inevitable corrosion. The corrosive bond was so severe that the chain snapped upon the first attempt. The water and wastewater treatment and control industry is a prime example of how constant exposure to toxic elements can and ...


    By Plasti-Fab, Inc.

  • Equipment List for full solids manage & drilling waste

    Solids Handle & drilling waste management are pretty important for drilling contractor. If they manage this division well, they can save lots of money on drilling mud / drilling chemicals, also they can be environmental friendly. There is much equipment needed for solids control & drilling waste ...


  • Water Level Monitoring and Control Solutions for the UK Internal Drainage Boards

    Pulsar Process Measurement have been involved in design, manufacture and supply of non-contacting Ultrasonic Level and Pump Control systems for the Internal Drainage Board industry for many years. Three typical examples of the application of this equipment are installed at North Level IDB Cross Guns Pumping Station. The original Cross Guns Pumping Station was built in 1938 to house three 760mm ...

  • Case study - Algae control in raw water reservoir Ecuador

    Before the installation of the LG Sonic e-line equipment algae grew on the surface and settle down on the liner before entering the drinking water treatment plant. To cover the 24.000 m2 of water surface, it was decided to install 3 devices.   The Challenge: Green Algae Covering the Sides of the Lagoon Located in Santa Elena’s peninsula, the 42.000 m3 raw water ...


    By LG Sonic

  • Continuous nonlinear model predictive control of a hybrid water system

    Incorporating weather forecasts in the control of land surface water levels requires predictions of the net inflow to the water system. This net inflow is the combined flow of an incoming load (rain, evaporation, etc.) and outgoing pump rates. Because the pump costs are considerable, optimal pump schedules have minimal energy consumption. Model predictive control (MPC) is able to compute, revise ...


    By IWA Publishing

  • Equipment and technology review: rocscience tunneling applications

    Allen Gwynnes Pumps– name resurrected With a design and manufacturing history stretching back 150 years, Allen Gwynnes Pumps, a name long associated with the manufacture of large, performance critical pumps, is once again an active force in the market place, operating from its new head office location in Middlesbrough, UK. The company was acquired by NEI during the 1970’s, and then became part ...


    By Rocscience Inc.

  • Are You Well Equipped for Forklift Truck Cleaning?

    There are many types of pressure washing equipment available for washing forklift trucks, trailers, tractors, and similar vehicles. However, not every machine can claim to be right for forklift truck cleaning. Before you purchase a power washing machine for the purpose, you need to ask yourself if the machine will fulfill your requirements. Forklift truck cleaning requires machines with moderate ...


    By Daimer Industries Inc.

  • Sludge Landfill - Odor Control

    Products & Equipment Used: Pneumatic Foam Unit 1600/40 AC-920 Long Duration Foam Application Summary: The Lynn (MA) Water and Sewer Commission's incinerator, dedicated for burning secondary sewage sludge, was shut down because of stack emissions that exceeded regulatory standards. The sludge that was usually burned had to be placed ...


    By Rusmar Inc.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you