water data processing Articles

  • Sludge Blanket Level Detection – making new process opportunities possible

    Much Pulsar's Self-Cleaning Viper Sludge Sensor of the demonstrating the effective maintenance-free solution. discussion around the way we deal with sewage sludge – the way it is moved around the process, the bellmouth valves and decant processes, the downstream treatment of the liquors, important issues around TOTEX and discharge Compliance, plus more recently the ...

  • How to make top-down and bottom-up sustainability converge

    Fits and starts are all too common in the sustainability world. One year you have budget for initiatives; the next you don’t. Management hails cost savings on individual projects, but they miss the big picture and fail to link progress across departmental boundaries. Bottom-up progress and top-down directives pass each other like proverbial ships in the night. But it doesn’t have to ...


    By CH2M Hill Companies, Ltd.

  • Using Electromagnetic induction to characterize soils - Case Study

    Electrical conductivity measurements have been used for years to determine salinity and moisture in soils. Probes were inserted directly into the soil to determine how well the soil conducted an applied current. This process was slow and labor-intensive and was usually reserved for scientific studies. A more recent technique for measuring conductivity is electromagnetic induction (EM), a ...


    By Geonics Limited

  • Monitoring Gas Emissions from Volcanoes to Predict Volcanic Activity

    To understand and predict the behaviour of volcanoes an increasing number of scientists are combining geological monitoring and geochemical models. By measuring and monitoring the prevalence of gases like CO2, scientists hope to be able to better predict the likelihood of volcanic eruptions. In 2010 Iceland’s Eyjafjallajökull volcano erupted, releasing 250 million ...


    By Edinburgh Instruments Ltd

  • The benefits of monitoring compressed air

    Compressed air is used in many manufacturing processes for many different reasons, from the actuation and control of pneumatic valves and cylinders to the operation of process machinery and tooling. It can also be used as a transport medium for bulk materials or as a purge gas. For all its uses it is nonetheless expensive. This is why, through detailed monitoring, a business can enjoy the ...


    By Contrec Europe Limited

  • Changing the Rules with Mass Detection

    How simplified detectors can provide mass data for every analytical run and speed up method development With access to multiple mass spectrometry systems of varying degrees of sophistication, Davy Guillarme (University of Geneva, Switzerland) wasn’t actively looking for new mass detection solutions. Nevertheless, the Waters ACQUITY QDa mass detector caught his eye. Why? Because it opens a ...


    By Waters Corporation

  • Data Requirements for Ground Water, Surface Water, and Leachate

    It is common for ground water to be contaminated with the water soluble substances found in overlying soils. Many of the required data elements are similar, e.g., pH, TOC, BOD, COD, oil and grease, contaminant identification and quantification, and soil and aquifer characterization. Additional water quality monitoring data elements include hardness, ammonia, total dissolved solids, and metals ...

  • Biofilm control strategies in industrial processing waters

    Bacterial biofilms cause a number of serious problems for industrial fluid processing operations. Mechanical blockages, impedance of heat transfer processes and microbially induced corrosion result in billions of dollars of losses each year. In engineered systems, such as cooling water systems, food processing, and other industrial applications possible risk to public health and product spoilage ...

  • Degradation of azo dyes in water by Electro-Fenton process

    Abstract The degradation of the azo dyes azobenzene, p-methyl red and methyl orange in aqueous solution at room temperature has been studied by an advanced electrochemical oxidation process (AEOPs) under potential-controlled electrolysis conditions, using a Pt anode and a carbon felt cathode. The electrochemical production of Fenton's reagent (H 2O 2, Fe 2+) allows a controlled in situ generation ...


    By Springer

  • Meeting water quality specifications for 300 mm processing

    Abstract This paper reviews the historical ultrapure water specifications and compares them to the specifications for state of the art ...

  • Efficiency and reliability of membrane processes in a water reclamation plant

    Performance of a water reclamation plant using ultrafiltration (UF) and reverse osmosis (RO) treating 280,000 m3/d of wastewater was evaluated over 1 year. Statistical analyses were performed on flow rate, temperature, pH, total suspended solids (TSS), total dissolved solids (TDS), biochemical oxygen demand (BOD5) and total coliforms. Variations in flow rates coincided with those in ...


    By IWA Publishing

  • How data and analytics are keeping Philly’s water safe

    CH2M assisted Philadelphia to implement a Surveillance and Response System (SRS) demonstration project under the U.S. Environmental Protection Agency’s (EPA’s) Water Security Initiative. CH2M Global Director Smart Cities and Senior Technology Fellow Dr. Avinash S. Patwardhan and Ken Thompson, CH2M Deputy Director Intelligent Water Solutions and Senior ...


    By CH2M Hill Companies, Ltd.

  • LIMS Key to Quality Data Management in Water Industry

    WEFTEC  has just  wrapped up its 2012 conference – the largest meeting of its kind in North America.  The Water Environment Federations’ annual meeting has again delivered comprehensive water quality education and training to thousands of water quality professionals.  The leading discussions at WEFTEC ...

  • Efficiency Improvements in Water Treatment Process: Aqwest-Bunbury Water Board

     Aqwest-Bunbury Water Board has introduced a range of cleaner production measures designed to improve the overall efficiency of its water treatment plants. Background Aqwest, the operating arm of the Bunbury Water Board, supplies water to approximately 12,000 service connections for the 30,000 residents of the town of Bunbury, Western Australia, 180km south of Perth. ...


  • Co-Metabolic Processes

    Introduction: Co-metabolism is one form of secondary substrate transformation in which enzymes produced for primary substrate oxidation are capable of degrading the secondary substrate fortuitously, even though the secondary substrates do not afford sufficient energy to sustain the microbial population. An emerging application involves the injection of water containing dissolved primary ...

  • Hydrometric Network Data Management

    A key part of HL's contract with Dwr Cymru Welsh Water to install, operate and maintain a large network of telemetred reservoir level and compensation flow gauges, a suite of HL's software packages was also supplied to each of the three operational areas for managing time-series data and processing stage-discharge data into a long-term flow record archive. HL's HydroLog4 and Gauger 2 packages ...

  • Modelling the palm kernel oil extraction process in a hot-water medium

    The physical process was modelled to create understanding and better assess the performance of a palm kernel oil extraction system. Mathematical models were developed to describe the extraction of palm kernel oil in hot-water from the comminuted particles. The models developed included parameters such as particle size, moisture content and charge ratio, all as a function of time. Experimental ...


    By Inderscience Publishers

  • Effects of mixing on chloramination process

    According to a recent study more than 90 percent of water treatment plants utilizing chloramination for distribution system residuals indicate a certain level of dissatisfaction toward the process performance. One factor that may lead to such dissatisfaction is the inadequacy of mixing when ammonia is added to chlorinated water. If mixing is not instantaneous and uniform, the actual chlorine to ...


    By IWA Publishing

  • Evaluation of control strategies for drinking water treatment plants using a process model

    This research adds a method to evaluate control strategies to the design methodology for drinking water treatment plants. A process model dealing with parameters related to the calcium carbon dioxide equilibrium was set up. Using the process model, the existing control strategy was compared with a new control strategy and the effects of two different sets of input data were studied. It was ...


    By IWA Publishing

  • Flexible data management helps in regulatory compliance, by Colin Thurston, director of product strategy, process industries, thermo fisher scientific

    In the US state of Florida, the public regional wholesale water provider Tampa Bay Water and Veolia Water North America completed a 454,000 cubic meters (120 million gallons per day) water treatment plant that exceeds federal and state drinking water quality standards. The design, build, and operate (DBO) approach helped to save US$80 million and kept the project on schedule.The Tampa Bay Water ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you