water distribution nozzle Articles

  • 100 Simple Ways To Save Water

    To improve water conservation install a rain sensor, it turns off your irrigation when it rains. Use a weather-based controller. The use of smart controllers can reduce water usage 24% a year on average. Learn about available rebate programs ...


    By Jain Irrigation, Inc

  • User Benefits of Modern Air mist nozzle and secondary cooling system technology

    The demand for improved product quality and increased productivity has focussed attention on the need for more efficient systems of spray cooling during continuous casting. Nozzle characteristics msut be investigated and test procedures developed to mesure cooling patterns and heat transfer. Improved nozzle design and air/water systems gives in better water distribution and this reduces surface ...


    By Lechler Inc.

  • Important design parameters and user friendly features of modern air mist nozzles for slab and beam blank casters.

    The demand for improved product quality and increased productivity has focussed attention on the need for more efficient systems of spray nozzle systems for secondary cooling. Nozzle characteristics msut be investigated and test procedures developed to mesure cooling patterns and heat transfer. Improved nozzle design and air/water systems gives in better water distribution and this reduces ...


    By Lechler Inc.

  • Common Treatment Technologies for Halogenated VOCs in Ground Water, Surface Water and Leachate

    It may be necessary to know other subsurface information to provide remediation of VOCs in the ground water. Treatability studies to characterize the biodegradability may be needed for any biodegradation technologies. Treatability studies are usually necessary to ensure that the contaminated ground water can be treated effectively at the design flow. A subsurface geologic characterization would ...

  • Common Treatment Technologies for Nonhalogenated VOCs in Ground Water, Surface Water and Leachate

    It may be necessary to know other subsurface information to provide remediation of VOCs in the ground water. Treatability studies to characterize the biodegradability may be needed for any biodegradation technology. Treatability studies are usually necessary to ensure that the contaminated ground water can be treated effectively at the design flow. A subsurface geologic characterization would be ...

  • Common Treatment Technologies for Fuels in Ground Water, Surface Water, and Leachate

    It may be necessary to know other subsurface information to remediate fuels in ground water. Treatability testing to characterize contaminant biodegradability and nutrient content may be needed for any biodegradation technology. A subsurface geologic characterization would be particularly important to characterize the migration of NAPLs. Recovery tests are usually necessary to design a ...

  • Effective Temperature Control for Cement Kiln Off-Gases

    INTRODUCTIONEffective off-gas temperature control without unwanted side effects can be achieved in many cement plants with state-of-the-art evaporative spray technology. Gas temperatures have elevated in recent years from as low as 180°C to over 370°C. This is coincident with a higher proportion of 'dry' operation kilns. Evaporative cooling water sprays in conditioning towers, ducts or at the ...


  • Aeration decreases THMs

    WITH HIGH LEVELS of trihalomethanes (THMs), the township of North Shore in Northern Ontario, Canada, explored treatment options at its Serpent River'Water Treatment Plant. The Serpent River treatment process includes slow-sand filtration. limestone contact tanks, and sodium hypochlorite disinfection. After filtration, sodium hypochlorite is injected into the treatment process before water enters ...

  • Desalination for saudi arabian refinery

    Overview Aquatech is supplying the equipment for two (2) 525 gpm seawater distillation system to Saudi Arabian Oil Company’s Ras Tanura Refinery in Saudi Arabia. General Project Description Aquatech was successful in meeting the strict guidelines of Technical & Delivery requirements. In general the infrastructure was made capable of ...

  • Lowara booster sets used for dairy production

    The Italian producer relies on Xylem to make the world’s favourite cheese. It’s the most consumed – and imitated – cheese in the world, with 4 million wheels produced in more than 30 provinces of northern Italy every year. In the province of Cremona, Xylem Lowara pumps are critical to the production of this internationally renowned hard cheese. The dairy ...


    By LOWARA S.r.l.- a Xylem brand

  • Case study - Pure oxygen injection pilot test

    Introduction: The Moccasin Bend WWTP uses pure oxygen produced by a cryogenic oxygen plant for activated sludge treatment of the influent waste stream, which consists of municipal and industrial wastes. The waste stream contains a high proportion of high strength industrial waste, which results in a typical COD loading of about 2000 mg/L, which is approximately four times the strength ...

  • A STIEFEL project Waste Incineration Plant (KVA) Trimmis case study

    The waste incineration plant (KVA) Trimmis is situated in the eastern part of Switzerland and is connected to the railway network. As it is the only incineration plant in this province, it serves a large area with approximately 131’000 inhabitants. The local authorities waste disposal association named GEVAG is a public body serving 43 convention communities and 97 associated municipalities ...


    By Jakob Stiefel GmbH

  • Japanese metal powder manufacturer relies on U.S. Rotary Batch Mixer

    Nippon Atomized Metal Powders Corporation uses a patented water-jet atomization process to make high-quality super-fine metal powders from copper, bronze, brass, silver, gold, and stainless steel that are of consistent composition and particle size. Nippon Atomized Metal Powders refined the process of water-jet atomization to produce metal powders with well-shaped, uniform particles in the range ...

  • 10 Questions (And Answers) That May Change the Way You Aerate

    Slot Injector: How does the slot-shaped nozzle of the Slot Injector™ aeration system improve performance? The slot shaped nozzle and mixing chamber provide a larger shear surface for mass transfer than a circular jet of identical area. This unique shape results in a high percentage of gas dissolution and superior oxygen transfer rates with a 10-20% reduction in energy usage ...


    By KLa Systems, Inc.

  • Q&A: OMI’s Dr. Laura Haupert Discusses Eco-Friendly Odor Solutions for Landfills

    The waste management arena is continually challenged when it comes to fighting odors, which often become a major nuance for neighbors. Landfills all throughout the U.S. also have to contend with finding the right odor-abatement solutions that are both effective, and safe for employees and surrounding communities. In the following “Clearing the Air” Q&A, we speak with Dr. Laura ...


    By OMI Industries (OMI)

  • Dry/Wet Scrubbers for Clean Air Compliance

    Air-scrubbing venturis and towers may be the answer to clean air compliance for small- to medium-sized companies. Forthcoming requirements of the Clean Air Act Amendments of 1990 will inventory many more specific chemicals considered hazardous. From acetaldehyde to xylenes, the list regulated under the air taxies program includes 189 hazardous air pollutants (HAPs). That number may ...


    By CR Clean Air Group, LLC

  • Common Treatment Technologies for Nonhalogenated VOCs

    Soil vapor extraction (SVE), thermal desorption, and incineration are the presumptive remedies for Superfund sites with nonhalogenated VOC-contaminated soil. Because a presumptive remedy is a technology that EPA believes, based upon its past experience, generally will be the most appropriate remedy for a specified type of site, the presumptive remedy approach will accelerate site-specific ...

  • Fit for Changes

    Changing conditions are a huge challenge for pump operators. Not only can the operating costs skyrocket, but the risk of production downtime can too—which is unacceptable, especially in businesses like oil and gas, power, and water. The example of a water injection pump retrofit shows how Sulzer helps to ensure reliable operation and to reduce energy consumption. A major oil company ...


    By Sulzer

  • Rapid blending of nutraceuticals in a restricted space

    Although vitamins and minerals have long been a mainstay in health maintenance, a new category of health maintenance products has created an entirely new market over the last two decades. The term "nutraceutical" was first defined in 1989 by Stephen DeFelice, M.D. as "... food, or parts of a food, that provide medical or health benefits, including the prevention and treatment of disease." Since ...

  • Pipeline Zooming for a Comprehensive Infrastructure Survey.

    Time, budget and resources often keep a municipality from maintaining comprehensive, up-to-date information on water and sewer pipeline conditions. Without a complete understanding of their infrastructures, municipal supervisors cannot properly prioritize and schedule maintenance activities. As a result, emergencies—backups, collapses, and overflows—happen unexpectedly, and must be dealt with on ...


    By Envirosight LLC

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you