water filter cartridge Articles

  • Developments in string wound filter cartridges

    String wound filter cartridges are the most commonly used filtration media for reducing contamination in water and other liquids. Filtration applications include reverse osmosis and water softening prefiltration, boiler feed water for steam generation, cooling towers and heat exchangers, bottled water, edible oils, oil and gas production, process water for textiles, electroplating and anodizing ...

  • Memtrex-PC Polycarbonate Cartridge Filter

    Producing the Membrane The polycarbonate track-etch (PCTE) membrane filters are precision, two-dimensional microporous screens. As in the case of other screens, particle capture takes place on the surface. Compare this to ordinary cast membrane filters which depend upon particle capture by random entrapment within the filter's tortuous pores. PCTE membranes are manufactured in a two-step ...

  • The productive environmental laboratory: BSK Labs boosts efficiency with Metrohm IC

    BSK Labs runs a number of environmental laboratories and service centers along the west coast of the US. A total of 70 employees – including microbiologists, chemists, lab technicians, and support staff – make sure that the 200 to 350 samples that come in every week are analyzed. BSK Labs specializes in potable water chemistry, ground water monitoring, storm water runoff, solid waste ...


    By Metrohm AG

  • Advances in String-Wound Sediment Filter Cartridges

    In the mid-1930s, the first string-wound depth filter cartridge entered the U.S. market. It was made from a woven wire mesh core surrounded by a cotton yarn, which was wound to form the depth filtration medium. The yarn itself was a tightly twisted medium and the major filtration essentially took place at the points of crossings of the yarns- which formed a diamond-shaped pat-tern-rather than ...

  • New polypropylene media for string-wound filter cartridges

    String-wound cartridges are among the most commonly used filtration media for reducing sediments and other suspended impurities in liquids and water. Traditionally these cartridges are made from 'roving' or 'friction-spun' yarn and factors such as media migration and chemical leaching were among the major drawbacks. With a new innovative development in the polypropylene filter media for making ...

  • Unmixing Water From Waste: The imporance of filters, cartridges and housings as a function of manufacturing

    In manufacturing, water and water-based solutions are regularly filtered for various purposes and outcomes – including for cleaning, cooling, and movement. The filtering process is crucial to quality, performance, and cost savings. With the wrong filter in place, pumps can be destroyed, liquid being filtered can become “unusable” for the intended purpose, cleaning solvents can ...


    By Shelco Filters

  • New developments in filter cartridges for reverse osmosis pre-filtration

    Reverse osmosis (RO) pretreatment systems are designed to reduce suspended solids to a level that will provide the most suitable conditions for the performance of the membrane system. Depending upon the quality of the feed water, pretreatment may include settlement, clarification, multi-media filtration, and chemical treatment. However, sediment pre-filtration is always required to ensure that ...

  • Continuous filament media revolutionize string wound cartridges

    Depth filter cartridges made from a cotton string wound media and a metal core were first introduced in the market in the mid-1930s. By the late 1970s cartridges with a polypropylene (PP) core and yarn had become popular because they had a very wide range of chemical resistance, and therefore could be used in a wide variety of applications. Initially, the string media was a roving (a bulky ...

  • High performance microbiological filter

    Filtration processes are a large cost component of pharmaceutical manufacture. The particle retention efficiency, particle capacity of the filter and the liquid flux all impact on product cost. A non woven electropositive filler media has been developed whose active component is an alumina (AlOOH) fiber two nanometers in diameter and having a surface area of 350-500 m7g. The nano fibers are ...


    By Argonide Corporation

  • Continuous fibres lead to successfuI filter

    An improved design of wound string filter has doubled contaminant holding capacity and avoided the shedding of small fibres bad into the fluid. Tom Shelley investigates Wound string filters are setting new benchmarks for efficiently catching large amounts of dirt, without risk of introducing stray fibres or other contaminants into the fluid stream being filtered. Initially ...

  • Removing Solids with Automatic Self-Cleaning Filters

    Introduction The “art” of filtration utilizes many methods for separating solid particles from fluids. There is often no right or wrong method. Water quality and customer requirements usually determine the “best” method for each unique situation. Ridged screens, pleated cartridges, string wound cartridges, melt blown cartridges, woven fabrics, non woven fabrics, sintered metals, granular ...

  • Using a Self Bailer on Containment Sumps to Filter Hydrocarbons

    How do you eliminate problems associated with the collection of rainwater in outdoor containment systems and maintain compliance with EPA and Clean Water Act regulations?  Since most outdoor oil storage tank sumps and oil drum spill pallets will inevitably be exposed to local precipitation and storm water runoff from nearby catchment surfaces, it is necessary to make sure you ...


    By Interstate Products Inc

  • Methods of Water Purification

    This article is excerpted from 'Pure Water Handbook' published by Osmonics®, Inc. of Minnetonka, Minnesota USA and is printed with permission of Osmonics, Inc. Water treatment can be defined as any procedure or method used to alter the chemical composition or natural 'behavior' of a water supply. Water supplies are classified as either surface water or groundwater. The majority of public or ...

  • Water testing 101: TDS

    According to Wikipedia, total dissolved solids (TDS) is defined as “the combined content of all inorganic and organic substances contained in a liquid that are present in a molecular, ionized or microgranular suspended form.” The article goes on to state that “total dissolved solids are differentiated from total suspended solids (TSS) in that the latter cannot pass through a ...


    By HM Digital, Inc.

  • Water Treatment Plant (Drinking Water) Indian Oil Corporation Limited, India

    W.O.G Groups responded to the challenge of providing safe drinking water to the Indian Oil Corporation Limited township by undertaking a Drinking Water Treatment Plant of Capacity 5.76 MLD, including 1 year O&M. CHALLENGE: The raw water is to be treated for the removal of Manganese, iron, turbidity, suspended solids, colour, organic matter and pH The design of ...


    By WOG Technologies Inc.

  • Process Water Treatment – Challenges and Solutions

    Untitled Document Clean water is needed by chemical-process plants for a wide range of process-related and auxiliary uses. Likewise wide is the range of options available to the ...


  • Water recovery system reduces soft drink manufacturers water waste by 35%

    The filtration and water treatment specialist Puresep provide leading soft drinks manufacturer with a state of the art system to reduce their water usage Puresep were contacted to look at ways the soft drinks manufacturer could reduce the amount of rinse water sent to drain – in order to help them achieve their water reduction targets Following an onsite review of the current rinse ...


    By Water Active Ltd

  • Treating Industrial Water with Membrane Technology

    A variety of industries are finding that it makes sense to reevaluate the way they treat industrial process water, both to improve the quality of their products and increase the efficiency of their processes. Purification systems utilizing crossflow membrane filtration, such as reverse osmosis (RO), nanofiltration (NF) or ultrafiltration (UF) can be a good alternative to traditional filtration ...


  • Waste water plant struggles with contamination case study

    A plant in the southwest US commissioning a wastewater plant utilizing proprietary technology for the removal of benzene, toluene, and xylene, or BTX, was experiencing challenges with throughput and elevated operational costs due to the presence of particulate contaminants. The plant takes the wastewater and processes it, removing the BTX prior to being fed to the conventional wastewater plant. ...

  • Sea water desalination for sagunto, Spain

    The Problem The Sagunto locality is situated in the region of the Camp of Morvedre in Spain. In recent years, a strong industrial growth has been anticipated in the zone. This has provoked a growing requirement for water in the Municipal Region of Sagunto. For this situation, the Sagunto Council planed to cover part of the future hydraulic deficit for short and long term with the ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you