water filter manufacturer Articles

  • Unmixing Water From Waste: The imporance of filters, cartridges and housings as a function of manufacturing

    In manufacturing, water and water-based solutions are regularly filtered for various purposes and outcomes – including for cleaning, cooling, and movement. The filtering process is crucial to quality, performance, and cost savings. With the wrong filter in place, pumps can be destroyed, liquid being filtered can become “unusable” for the intended purpose, cleaning solvents can ...


    By Shelco Filters

  • River water is filtered for use in an electronic disk manufacturing facility in Hokkaido, Japan

    New Logic International installed its Vibratory Shear Enhanced Processing (VSEP) Phase I system in July, 1997, and the Phase II system in August 1998 at a major international electronic disk manufacturing facility at Hokkaido Island located in Northern Japan. The VSEP is used for treatment of river water for ultrapure water production at this facility. The VSEP system uses an ultrafiltration ...


    By New Logic Research, Inc.

  • Circuit Board Manufacturer

    A circuit board manufacturer was having difficulty with copper and zinc in their wastewater stream. The metals come from etching and plating processes at the facility. Integrated Engineers treated the water with IE-061 (a metal precipitant), and Floccin-1105. The photo on the left shows untreated and treated water samples. Note the clarity of the water in the treated sample. The photo on the ...


    By Integrated Engineers Inc.

  • MBR for Major Cereal Manufacturer

    Dynatec provides a turnkey wastewater solution to a food manufacturing wastewater process for a major cereal manufacturer. The problem A major cereal manufacturing plant manufacturer needed to upgrade their treatment process. MBR was selected, and the company was about 1 month away from entering into a contract with a major MBR supplier of submerged hollow fiber membrane ...


    By Dynatec Systems Inc.

  • Water recovery system reduces soft drink manufacturers water waste by 35%

    The filtration and water treatment specialist Puresep provide leading soft drinks manufacturer with a state of the art system to reduce their water usage Puresep were contacted to look at ways the soft drinks manufacturer could reduce the amount of rinse water sent to drain – in order to help them achieve their water reduction targets Following an onsite review of the current rinse ...


    By Water Active Ltd

  • Golf club manufacturer case study

    Scope This major golf club manufacturer was regularly dumping water from a drawing process, floor scrubbers, mop water and waste coolant. Before the equipment installation, over 2,000 gallons of waste water were hauled each week at a considerable cost. The customer established a goal to purify water so that it could discharge to the sewer and to reduce waste. ...


    By Separation Dynamics

  • Beverage Manufacturer to Cut Disposal Cost

    THE PROBLEM A Pennsylvania general contractor with much experience within the beverage industry, saw that water utilization at a major food and beverage manufacturer’s facilities would benefit from an integrated approach to minimizing water consumption, while simultaneously optimizing boiler and cooling water treatment issues.  By adopting such an approach, the contractor planned to offer ...


    By Samsco Corporation

  • Water contamination problems solved at automobile air bag manufacturing plant

    The Facility Based in a Rocky Mountain state, this facility produces the sodium azide pellets contained inside the air bags for automobiles produced throughout the world. The Problem During the manufacturing of the air bag propellent, frequent equipment washdowns produce large volumes of wastewater that contain sodium azide and metal sulfide salts. Sodium ...

  • Brick Manufacturer Wastewater Case Study

    Manufacturing Wastewater Treatment Case Studies Brick Processing Manufacturer Wastewater Treatability 10.16.2009 The Morin Brick ...


    By Integrated Engineers Inc.

  • Side-by-Side Pilot Testing of Two Disk Filter Manufacturers at the City of Merced Wastewater Treatment Plant

    ABSTRACTAs more wastewater treatment facilities upgrade to tertiary treatment for pathogen removal and trace pollutant reduction, the options for tertiary filtration expand. The use of cloth-disk media filtration (disk filters) for tertiary filtration is becoming more common because of the effluent quality, lower backwash rates, small footprint, and ability to meet ...

  • Manufacture of a low-cost ceramic microporous filter for the elimination of microorganisms causing common diseases

    Africa is one of the most water-scarce continents on earth and the lack of potable water is responsible for the death of approximately 4,900 children every day. An effective way of making sure that water is of good quality is by decontaminating it by means of a household ceramic water filter. The low-cost water filters suitable for the removal of suspended solids, pathogenic bacteria and other ...


    By IWA Publishing

  • Metal finishing - Columbia manufacturing company - case study

    Application Columbia Manufacturing Company of Westfield, Massachusetts began producing bicycles in 1877. The company, while still producing bicycles, transitioned its core product line to institutional furniture with chrome plated bases made from tubular steel. Large amounts of potable water were required for the old plating system. The company was using 180,000 gallons of potable water a ...


  • Electropositive filtration technology in automobile manufacturing applications

    Argonide Corporation began as an organization focused on the production and sale of nanopowders. By definition, nanopowders are extremely small particles (less than 0.1 micron) of materials such as nickel, copper, iron, alumina, gold, etc. These materials are in demand by research and development groups within both the public and private sectors. To date, the company is still involved in this ...


    By Argonide Corporation

  • MBBR Helps Seafood manufacturer meet regulatory requirements

    Abstract Seafood processor in Manta Ecuador has a high strength wastewater with TSS as high as 20,000 mg/l, FOG 700 mg/l, COD of 13,000 mg/l and BOD of 6,000 mg/l. Wastewater is discharged into Pacific Ocean across the street from the factory. Current treatment plant produces effluent with TSS of 150 mg/l, FOG of 80 mg/l, COD of 800 mg/l and BOD of 400 mg/l on average. New laws require that ...

  • Dynatec Provides Complete System for Aerospace Manufacturer

    Dynatec is engaged to provide a comprehensive water and wastewater treatment solution for an aerospace manufacturing process. Background Goodrich Aerospace was relocating a manufacturing facility that performs surface treatment for aircraft metal parts. The facility produces about 150,000 gallons per day of wastewater that contains hexavalent chrome, titanium, and other ...


    By Dynatec Systems Inc.

  • Electropositive filtration technology in automobile manufacturing applications

    Argonide Corporation began as an organization focused on the production and sale of nanopowders. By definition, nanopowders are extremely small particles (less than 0.1 micron) of materials such as nickel, copper, iron, alumina, gold, etc. These materials are in demand by research and development groups within both the public and private sectors. To date, the company is still involved in this ...


    By Ahlstrom-Munksjö

  • Integrated Engineers Case Study: Circuit Board Manufacturer

    A circuit board manufacturer in southern California was not able to achieve the discharge levels of copper and nickel with their existing system of coagulant, anionic and cationic flocculants and metal precipitant treatment process followed by lamella plate clarification. The previous treatment process developed a settled sludge that had poor shear characteristics and required further coagulant ...


    By Integrated Engineers Inc.

  • Aerospace - Leading Aerospace manufacturing firm - case study

    Application The company designs and builds flight controls for aircraft and launch vehicles. Their product line includes thrust vector and steering controls for space vehicles as well as thruster valves, regulators and integrated manifolds for satellite propulsion. Manufacturing of most of these products requires either military spec plating or anodizing to ensure protection from extreme ...


  • Superior Manufacturing Division, Magnatech Corporation Case study

    15 Years of Saving the Environment Some companies seem to always be ahead of their time. Rather than going with the flow, they choose to step out and try something different. That’s what often leads them to success. L&L Products of Romeo, MI, is one of these mastermind companies. The intellectual wheels of Robert Ligon and Eugene Lane started turning in 1958 after realizing a ...

  • Cleaner Production in Confectionery Manufacturing: Cadbury Schweppes

    Cadbury Schweppes Pty Ltd has implemented a large number of cleaner production initiatives at it's Ringwood Confectionery plant in Victoria. The annual savings from reduced raw material and waste disposal costs amount to $780,000. Background Cadbury Schweppes Pty Ltd's plant in Ringwood, Victoria produces a range of confectionery products, including Easter eggs, chocolate bars ...


Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you