water flow control equipment Articles

  • Pressure Washing Equipment for Temperature Control

    Pressure washing equipment with heating capabilities has one advantage over non-heated pressure washing equipment. These machines can use hot as well as cold water. Therefore, when purchasing pressure washing equipment, it is always a good idea to purchase machines that allow for temperature control. Hot Water Applications Hot water cleans where cold water cannot. Heat acts on ...


    By Daimer Industries Inc.

  • Modeled Flow Duration Variations, Pollutant Discharges, and Costs for Different Stormwater Controls

    ABSTRACTRunoff volume and pollutant discharges increase with development, with associated detrimental receiving water effects. These increases can be partially controlled by installing stormwater control practices, such as wet detention pond at outfalls, using conservation design controls such as grass swales and bioretention devices, and by improved development practices that reduce the amounts ...

  • Size Reduction Equipment Review

    Untitled Document LAST YEAR, BioCycle was approached by CalRecovery, Inc. - a ...


    By BioCycle Magazine

  • Controlling scale in water systems helps prevent legionella

    The Legionella bacterium, Legionella Pneumophila (LP), the fundamental agent of Legionnaire’s Disease, is a water-based organism, which causes infection when inhaled in an aerosol form. Legionnaires' Disease acquired its name in 1976 when an outbreak of pneumonia occurred among persons attending a convention of the American Legion in Philadelphia. Later, the bacterium causing the illness ...

  • Low-Flow (Minimal Drawdown) Ground-Water Sampling Procedures

    Untitled Document Background The Regional Superfund Ground Water Forum is a group of ground-water ...


    By Solinst Canada Ltd.

  • Aeration System Upgrade Increases Flow Capacity and Reclaimed Water Availability

    Read the full Case Study: Replacing Brush Rotors with Aire-O2 Tritons® Increases Flow Capacity and Reclaimed Water Availability Overview: In 2012, ...

  • Are You Well Equipped for Forklift Truck Cleaning?

    There are many types of pressure washing equipment available for washing forklift trucks, trailers, tractors, and similar vehicles. However, not every machine can claim to be right for forklift truck cleaning. Before you purchase a power washing machine for the purpose, you need to ask yourself if the machine will fulfill your requirements. Forklift truck cleaning requires machines with moderate ...


    By Daimer Industries Inc.

  • Continuous nonlinear model predictive control of a hybrid water system

    Incorporating weather forecasts in the control of land surface water levels requires predictions of the net inflow to the water system. This net inflow is the combined flow of an incoming load (rain, evaporation, etc.) and outgoing pump rates. Because the pump costs are considerable, optimal pump schedules have minimal energy consumption. Model predictive control (MPC) is able to compute, revise ...


    By IWA Publishing

  • City utilizes leading edge controls for water filtration operation case studies

    Background “Where the Prairie Meets the Pines.” This is the city slogan for Fosston, Minnesota. It instantly conjures images of a tranquil, natural rolling landscape for this northwest Minnesota town of 1500 residents. Surrounded by farmland and with two wildlife refuges nearby, picturesque scenery abounds. It is here that computer and PLC technology have been optimized. This ...


    By Filtronics, Incorporated

  • Healthy Control Valves

    A simple maintenance routine can help ensure trouble-free valve operation. Whether the control valve in your system is the first one that has required maintenance or if you are experienced with maintaining multiple valves in your system, some simple guidelines can help keep them operating at optimal performance. Physically checking all valves at least every 12 weeks is important, assuming that ...


    By Singer Valve Inc.

  • Spill prevention, control and countermeasure

    Background One of the EPA’s mandates is to prevent oil spills from polluting our nation’s navigable waterways which are defined under the Clean Water Act and Oil Pollution Act as any waterway or body of water that is used for ...

  • Metal Coating Emission Control

    The use of regenerative thermal oxidizers is expanding into applications where they wouldn’t have been considered years ago, says Mike Scholz As the first generation of oxidizer systems in the industry nears the end of their service life, many canmaking plants face repair or replacement of their existing air pollution control systems. Like many others in the industry, a Silgan canmaking ...

  • All About Low Flow Carpet Cleaning Systems

    Rug cleaners are used for cleaning carpets, mats, rug, upholstery, and other soft surfaces. These are low-powered machines suitable for cleaning soft surfaces. The output pressure and temperature, often the indicators of cleaning power for cleaning equipment, are relatively low for these machines. The output pressure of even the industrial rug cleaners does not exceed 500 psi. Only the most ...


    By Daimer Industries Inc.

  • Non-contacting Ultrasonic Pumping Station Flow Measurement Saves Money for Dwr Cymru Welsh Water

    Dwr Cymru Welsh Water has benefitted from the unique 'Pumped Volume' feature built into Pulsar's Quantum 2 Pump Station Controller; identifying a flow problem within a pumping station network without the need for expensive Magflow meters. Once the issue was resolved, pumped volume through one of the stations was reduced by 88% , ...

  • Mercury Spill Control Procedures

    Mercury is a known neurotoxin that is extremely toxic even in small amounts. It directly affects the central nervous and renal systems, causing developmental delays, motor and brain problems like those associated with autism. Mercury"s hidden danger also lies in when at room temperature, when exposed it vaporizes readily. Once ...


  • Performance monitoring & troubleshooting with a new individual condenser tube circulating water flow and fouling (ClA/FF) meter - case study

    Introduction Midwest Generation Joliet Station in Illinois has two coal-fired units, Unit 7 and Unit 8. Roth 550 MW units are located on the Des Plaines River and have been in operation since 1963-1964. The circulating water system is a once-through system comprised of a bar rack, traveling screens, circulating water pumps and reversible condensers. The original condenser tubes on Unit ...


    By Intek, Inc.

  • Food Waste Collection Companies Grow With The Flow

    On October 1, the Commonwealth of Massachusetts’ ban on landfill disposal of commercial organics from establishments generating one ton or more of food waste per week goes into effect. On the front lines of helping these businesses and institutions comply are organics haulers, many of whom have been offering their services for years. “Seven years ago, we were servicing about two dozen ...


    By BioCycle Magazine

  • RO monitors and Controllers: pros and cons

    A look at a range of devices for watching TDS. One major question a potential customer may ask before they purchase a point-of-use/point-of-entry (POU/POE) water treatment system is, “How often will I need to change the filter?” Maintenance and service are directly related to two of their major concerns: money and health. People don’t want to spend money unnecessarily, yet they ...


    By HM Digital, Inc.

  • Pollution prevention and control, West Wales

    Project Earlier this year, Remediation Strategies were asked to look into the development of a pneumatic barrier for a specific oil spill response scenario.  A pneumatic barrier uses compressed air in an underwater environment to create a vertical ‘bubble barrier’ and a standing wave at the water surface. The purpose of the barrier is to contain a given spillage of ...


    By Remediation Strategies Ltd.

  • Controlling Scale Deposition and Industrial Fouling

    It costs US industry billions of dollars a year to control and remove the limescale that builds up in industrial equipment such a heat exchangers, evaporative coolers, boilers, chillers and other water fed equipment. Oil wells, for example, face significant scaling problems from the highly mineralized water that are extracted with the oil. Limescale not only increases downtime, maintenance ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you