water flow meter Articles

  • How Does a Water Flow Meter Work?

    A water flow meter works by measuring the amount of water that passes though the flow meter. The most common mechanical types work by measuring the speed of flowing water that causes a turbine or piston to rotate. The volumetric flow rate of the water is proportional to the rotational speed. Other water flow meters include ultrasonic, magnetic and vortex flow meters. The best type of water flow ...


    By Sierra Instruments, Inc.

  • How Does a Water Flow Meter Work?

    A water flow meter is a device that measures the amount of water flowing through a pipe. There are several water flow meter technologies to choose from depending on the water measurement application, maintenance requirements, and budgetary terms.  Each of these types of water flow meters has a unique principle of operation, specific application benefits, and overall ...


    By Sierra Instruments, Inc.

  • Efficient minimum night flow analysis using Bayesian inference

    This study examines a plan for efficient leakage investigation to decide the number of survey-subjected water meters in the Option A method, which requires considerable manpower and expense, along with possible civil complaints, among the possible methods for determining the minimum night flow. The Bayesian approach was adopted, and the prior distribution of night use and water supply pipe night ...


    By IWA Publishing

  • Preventable Mistakes with Vortex Flow Meters

    Vortex flow meter technology is an ideal technology for many applications particularly saturated and supersaturated steam, volumetric water applications as well as flow energy management (natural gas, compressed air, steam, water) in facilities and large campuses. In some of these applications, vortex installations can be tricky and take flow expertise for the most successful installations. Kam ...


    By Sierra Instruments, Inc.

  • Irrigation Water Flow Measurement with Greyline AVFM Area-Velocity Flowmeter - Case Study

    The United Irrigation District (UID) in Southern Alberta, Canada serves 34,400 acres of rural land through a series of canals, channels and pipelines running 236 km throughout the region. Water is a valuable resource in the warm, arid regions of the province and agriculture uses 60-65% of the fresh water consumed. So water use is closely regulated and monitored. ...


    By Greyline Instruments Inc.

  • Data Flows

    Metering only tells us our total water usage, but the latest technology can tell us so much more, according to Dene Marshallsay and Mark ...


    By WRc plc

  • Optimal meter placement for pipe burst detection in water distribution systems

    Pipe bursts in water distribution systems (WDS) must be rapidly detected to minimize the loss of system functionality and recovery time. Pipe burst is the most common failure in WDS. It results in water loss out of the system, increased head losses, and low pressure at the customers' taps. Therefore, effective and efficient detection of pipe bursts can improve system resilience. To this end, ...


    By IWA Publishing

  • VIDEO: Mass Flow Meters for Power Plant Applications

    Generating electricity in a natural gas power plant is a complex process due to the multiple steps involved with the different types of fluids being used and optimized. Dr. John Olin, Founder of Sierra Instruments, explains how thermal mass flow meters, vortex flow meters, and ultrasonic flow meters can improve the flow energy management in power plant ...


    By Sierra Instruments, Inc.

  • Quarry dewatering compliance - Case Study

    Louis W. Bray Construction installed a Greyline Area-Velocity Flow Meter in 2009 to meet Ministry of Environment regulations. Their permit stipulated effluent limits plus monitoring, sampling and flow measurement of wastewater discharged from the site to the South Raisin river. The Ontario Water Resources Act requires flow monitoring for any quarry dewatering greater than 50,000 liters per day. ...


    By Greyline Instruments Inc.

  • Quarry Dewatering Compliance - Case Study

    Louis W. Bray Construction installed a Greyline Area-Velocity Flow Meter in 2009 to meet Ministry of Environment regulations. Their permit stipulated effluent limits plus monitoring, sampling and flow measurement of wastewater discharged from the site to the South Raisin river. The Ontario Water Resources Act requires flow monitoring for any quarry dewatering greater than 50,000 ...


    By Greyline Instruments Inc.

  • Monitoring food slurry and Water dosing - Case study

    A manufacturer of waste food de-packers is using Siemens MAG 5100 W magnetic flow meters to monitor both dosing water and food slurry Collected food waste from food manufacturers or retailers and domestically generated food waste includes a proportion of packaging waste such as paper, card, cans and glass. ...


    By iCenta Controls Ltd

  • The Function of an Ultrasonic Flow Meter

    Running a water management operation requires taking a wide range of measurements. In addition to measuring the flow in your system, many systems must measure the water level of their channel, and one of the best tools for accomplishing this goal is an ultrasonic flow meter. ...


    By TRACOM Inc.

  • Core technology part 2: transit-time ultrasonic

    Since the introduction of ultrasonic transit-time flow meters, manufacturers have continually improved their measurement and signal processing capabilities. Recent advances in digital correlation transit-time technology allow customers to use this convenient, non-intrusive installation to address some of the more challenging flow applications. Ultrasonic flow meters are divided into two ...


    By Sierra Instruments, Inc.

  • Performance monitoring & troubleshooting with a new individual condenser tube circulating water flow and fouling (ClA/FF) meter - case study

    Introduction Midwest Generation Joliet Station in Illinois has two coal-fired units, Unit 7 and Unit 8. Roth 550 MW units are located on the Des Plaines River and have been in operation since 1963-1964. The circulating water system is a once-through system comprised of a bar rack, traveling screens, circulating water pumps and reversible condensers. The original condenser tubes on Unit ...


    By Intek, Inc.

  • Electronic Water Meter For Leakage Repair - Case Study

    Every year, EMS (Energy Management System) produces and markets smart electronic water meters (domestic/ bulk), wireless transmission data logger (GSM/ GPRS), and advanced AMR (Automatic Metering Reading) systems. Unlike traditional mechanical water meter, the magnet-free electronic smart water meter with class C (CNS 14866) metrological performance can maintain 12 years battery lifespan. With a ...

  • Development of a self-rechargeable digital water flow meter

    The objective of this paper is to present the feasibility of a self-rechargeable digital water flow meter (SRDFM) system for water pipes using the latest data processing and wireless communication technologies while causing negligible water pressure drop (head loss). The system uses a Pelton turbine generator to power the electronic circuit, which processes and transmits the signals generated by ...


    By IWA Publishing

  • Monitor Dredging Slurry Flow from Outside the Pipe - Case Study

    Dredging Equipment Manufacturers Choose Non-Contacting Greyline Flow Meters The Challenge Thousands of dredges are operated to maintain navigation channels in our rivers, lakes and harbours and to mine sand and gravel for the construction industry. Managing and optimizing production from a dredge requires continuous monitoring of pipeline pressure, vacuum ...


    By Greyline Instruments Inc.

  • Controlling the addition of Chlorine into a Process

    There are several methods for controlling the addition of chlorine into a process. These methods include flow proportional injection, ORP (oxidation reduction potential) or a residual chlorine analyzer. Each method measures a different process characteristic. Depending on the specific type of process being controlled, there generally is a best choice for controlling the injection of either ...


    By Walchem, Iwaki America Inc.

  • Now Measure All Flow Energy in Your Facility - One Solution - Three Metering Technologies

    Facilities managers at large facilities often have the challenging task of managing all the flow energy in their facility with the mandate from upper management to save money on energy costs. To accomplish this goal, it’s critical to get accurate flow measurement data of the flow energy in your facility such as: natural gas, compressed air, steam, chilled and hot water. ...


    By Sierra Instruments, Inc.

  • Wastewater Plant Relies on Thermal Flow Meter for Co-Gen Power Gas Blending Process

    The Rahway Valley Sewerage Authority (RVSA), which operates a large wastewater treatment plant in New Jersey, embarked on a green co-generation waste-to-energy project to power a portion of its operations. The plant performs primary, secondary, tertiary and sludge treatment processes in serving over 250,000 residential customers and 3000 industrial and commercial customers in a 40-plus square ...


    By Modern Pumping Today

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you