water jetting nozzle Articles

  • The case for water jet tank cleaning

    To maintain a consistently high level of product quality, today's processing plants must ensure that their tanks and reactors are thoroughly cleaned on a regular basis. The direct expenses involved can be substantial, and adding indirect costs {e.g., downtime and compliance with safety and environmental regulations) puts extreme pressure on tight operations budgets. To meet this challenge, more ...


    By NLB Corp.

  • K3Delta installs a high-efficiency BBA Pumps jet water unit

    The Dutch K3Delta family business has a rich history. Since 1928 the company has been a leader in the responsible extraction of sand and gravel. Additionally, the company has become a major player in the raw materials market, where sustainable development plays a key role. For the production site at Lingemeer near Echteld, K3Delta has recently installed a new ...


    By BBA Pumps

  • Muddy waters

    Mark Zwinderman of Surface Active Solutions, looks at the dangers involved in the cleaning and maintenance of mud tanks and associated equipment The oil industry involves many thousands of people working daily in potentially hazardous circumstances with dangerous chemicals and sophisticated engineering equipment. There has been a consistent and determined drive by the industry to reduce the ...

  • Water depth effects on initial dilution of horizontally discharged cold water from an elevated outfall

    In this study, the effect of bottom depth interaction on initial dilution differences of cold water discharge was experimentally investigated. 5°C cooled and dye tracer added cold water were horizontally discharged from a submerged circular nozzle from an elevated position into a stagnant and homogeneous receiving water in an experimental tank. Minimum initial dilutions were measured in cold ...


    By Inderscience Publishers

  • Experimental study of falling film evaporation on horizontal tube bundle for a desalination unit

    The objective of the present research is to experimentally study the effect of the tube configuration and also the effect of the operating conditions on the evaporation rate of the horizontal tube bundle. An experimental test loop was installed and the water spray on a horizontal tube bundle with three nozzles of fan-jet flat nozzle type. The results show that evaporation rate and Nusselt number ...


    By Inderscience Publishers

  • 10 Questions (And Answers) That May Change the Way You Aerate

    Slot Injector: How does the slot-shaped nozzle of the Slot Injector™ aeration system improve performance? The slot shaped nozzle and mixing chamber provide a larger shear surface for mass transfer than a circular jet of identical area. This unique shape results in a high percentage of gas dissolution and superior oxygen transfer rates with a 10-20% reduction in energy usage ...


    By KLa Systems, Inc.

  • Dredging Technology – Underwater Excavation and Construction

    The presence of water is ussualy considered a nuisance in construction, particularly when excavating removing water is common practice. In some cases however, water can be a very useful tool that may simplify things greatly. With the “flooded excavation principle”, the construction site is flooded after the retaining walls have been installed (e.g. sheet pile). When the ...


    By BBA Pumps

  • Cycle Stop Valve replaces four Variable Speed Pool Pumps case study

    This pool has 4 water features, a slide, a waterfall, a spa cascade, and a wet wall. I required the ability to run each of these water features independently. This pool also has four cleaning modes, two sets of in floor cleaning nozzles, skimming, filtering, and vacuuming. In addition this pool also has a 50 foot zero entry lip. In order to accommodate all the above a typical configuration would ...


    By Cycle Stop Valves, Inc.

  • Power Industry: Noxious Fumes at TVA Handled by Scrubber Case Study

    To keep the work area free of noxious fumes and reduce atmosphere pollution, T.V.A. Wilson Dam uses a 36″ diameter Clean Air Group fume scrubber to handle 12,500 cfm of gas @ 150°F in their high-analysis super phosphate operations. Manufacturing high analysis super phosphate fertilizer at the TVA Wilson Dam operation creates noxious fumes. Most of these fumes are liberated during the ...


    By CR Clean Air Group, LLC

  • Pharmaceutical: HCI Fumes Eliminated at Two Plants Case Study

    Little Maintenance Needed On Jet-Venturi Scrubbers; New Solutions Of Plant Problems: Two plants -Tenneco Chemicals, Reading, Pennsylvania and Hoffmann-La Roche, Nutley, New Jersey – are preventing the escape of HCl fumes from their plants by the use of jetventuri wet scrubbers and separators. Fiberglass-reinforced polyester construction of scrubber units is major factor that ...


    By CR Clean Air Group, LLC

  • Indian Balmer Lawrie uses BLABO to overcome difficult tank cleaning challenges case study

    Balmer Lawrie & Co. Ltd, a Government of India enterprise, specialises in providing tank cleaning and sludge separation services to the oil and petrochemical industries in India. Balmer Lawrie met a tough challenge at the IOCL Refinery in India, where they cleaned a crude oil tank with extraordinary high sludge content and had to work under very difficult conditions. Extremely high sludge ...


    By Oreco A/S

  • Double Duty Scrubber for TDI Fumes A case-history description of a relatively uncomplicated but effective method for handling large runaway emissions of TDI and solvent vapors.

    NKI (B. V. Nederlandse Kleurstofindustrie, a subsidiary of Morton-Thiokol, Inc. U.S .A.), and one of the major industrial firms in the Netherlands, had a problem with extremely toxic TDI (toluene di-isocyanate) emissions from one of their processes . On a batch basis in different reactors, the largest being 6.5 m cubed(1717 U.S . gallons), a solution polymerization of TDI with polyols in a ...


    By CR Clean Air Group, LLC

  • Case study - Shopping center avoids litigation by resolving sewer odor problems

    Mazzei Injector Company, LLC is a recognized industry leader in gas to liquid mass transfer primarily from its proven 25 year experience with ozone applications. In addition, Mazzei has installed the same patented Venturi injector and mixing nozzle technology in many municipal and industrial wastewater systems in applications at lift stations, equalization tanks, aeration basins, activated sludge ...

  • Waterjet Solutions Set NLB Apart

    It's a classic American success story: a young man thinks he can build a better mousetrap, works very hard, and becomes a leader in his field. Forty years ago Forrest Shook had that dream, and today his NLB Corp. is known around the world for innovative high pressure waterjetting equipment that makes contractors more productive. NLB manufactures the waterjet industry's most comprehensive line of ...


    By NLB Corp.

  • Cavitation leads to perfect mixes

    Development of accurate classification of cavitation types, as well as any classification, has to be based on a choice of general summary classification signs. For example, it can be different by constructive signs of work parts, by character of a course of process, by cavities types and other general classification signs. In present time distinguish the following types of cavitation: static, ...


    By GlobeCore Blending

  • Cavitation leads to perfect mixes

    Development of accurate classification of cavitation types, as well as any classification, has to be based on a choice of general summary classification signs. For example, it can be different by constructive signs of work parts, by character of a course of process, by cavities types and other general classification signs. In present time distinguish the following types of cavitation: static, ...


    By GlobeCore Blending

  • The MoClean system cleans a pyrolysis gasoline tank at Ruhr Oel in Germany case study

    The size and scope of this particular tank cleaning job approached the limit of the MoClean system capacity, but it nonetheless provided an excellent possibility to prove the flexibility and applicability of the MoClean system. The Oreco MoClean system is an automated tank cleaning system specially geared for cleaning of smaller and medium sized oil product tanks containing diesel, kerosene, jet ...


    By Oreco A/S

  • Injecting Innovation Into The Food And Beverage Industry

    Not all water treatment needs are the same. That’s why it’s imperative to work with those that understand the subtle differences that make each industry unique. For food and beverage companies, that means aligning with a company focused on oxygen transfer with a track record of innovation in jet aeration and mixing. Water Online spoke with KLa Systems to discuss its success within the ...


    By KLa Systems, Inc.

  • Industrial Pressure Washer for Removing Heavy Layers of Grime and Grease

    An industrial pressure washer usually has pressure level ranging from 1000 to 3500 psi. This machine also heats water to high temperatures; a commercial pressure washer can reach temperatures as high as 330°F. This combination of heat and high pressure works to dissolve dirt and grease and wash it away from the surface. An industrial pressure washer may also use cold water when heat is not ...


    By Daimer Industries Inc.

  • Japanese metal powder manufacturer relies on U.S. Rotary Batch Mixer

    Nippon Atomized Metal Powders Corporation uses a patented water-jet atomization process to make high-quality super-fine metal powders from copper, bronze, brass, silver, gold, and stainless steel that are of consistent composition and particle size. Nippon Atomized Metal Powders refined the process of water-jet atomization to produce metal powders with well-shaped, uniform particles in the range ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you