water jetting system Articles

  • The case for water jet tank cleaning

    To maintain a consistently high level of product quality, today's processing plants must ensure that their tanks and reactors are thoroughly cleaned on a regular basis. The direct expenses involved can be substantial, and adding indirect costs {e.g., downtime and compliance with safety and environmental regulations) puts extreme pressure on tight operations budgets. To meet this challenge, more ...


    By NLB Corp.

  • Water Jet Floor Cleaning and Effluent Recycling System: SCS Specialised Services

    SCS Specialised Services Pty Ltd has developed a method of cleaning industrial concrete floors which recycles the wash water (the Recovery Jet system). On average, this has resulted in an 85 per cent reduction in the quantity of effluent generated. Background SCS Specialised Services Pty Ltd is a small floor cleaning and protective coatings business, specialising in cleaning ...


  • K3Delta installs a high-efficiency BBA Pumps jet water unit

    The Dutch K3Delta family business has a rich history. Since 1928 the company has been a leader in the responsible extraction of sand and gravel. Additionally, the company has become a major player in the raw materials market, where sustainable development plays a key role. For the production site at Lingemeer near Echteld, K3Delta has recently installed a new ...


    By BBA Pumps

  • Oil skimmer helps jet fuel recovery system fly

    How do you recover free-phase jet fuel (JP-5) from nearly seven acres of air station groundwater under a tank farm? HSI GeoTrans, an environmental engineering and consulting firm out of Reno, Nevada, working in cooperation with a federal agency and private concerns, developed a cost-efficient and technically-effective remediation system to do just that. Innovative solutions, including the ...


    By Abanaki Corporation

  • Replacement of Hot Caustic Paint Stripping Process with High Pressure Water Jet System: Ford Australia

    Ford Australia Ltd replaced an existing hot caustic paint stripping process, used for cleaning car skids, with a high pressure water jet system. This project has resulted in annual savings in the order of $300,000 from reduced chemical, energy and waste disposal costs. Significant improvements in paint quality were also achieved through the ability to clean the skids on a more regular basis than ...


  • Jet A fuel soil contamination - Eaton Corporation

    LOCATION:  Battle Creek, MichiganPROJECT DATE:  January, 1993 to PresentCLIENT:  Eaton Corporation BACKGROUND: Soils and groundwater at this aircraft refueling facility were contaminated with an undetermined amount of Jet A fuel. The geology of the area is glacial outwash sand and gravel and post-glacial alluvium. The water table is located approximately 30 feet below ground level ...


    By Terra Systems, Inc. (TSI)

  • KLa Jet Aerators/Mixers for Large Diameter Equalization Tanks - Case Study

    Flow Equalization Many municipalities are facing the challenge of having to equalize large volumes of storm water sometimes mixed with raw sewage in order to continuously meet their permit limitations. The equalized flow is stored during a storm event and then slowly diverted to the treatment facility when influent flows return to normal levels.  In the past few years the need ...


    By KLa Systems, Inc.

  • Application of the Steam Jet Aerosol Collector (SJAC) for differential measurements of organic compounds in the gas vs. particle phase

    A modified Steam Jet Aerosol Collector (SJAC) for semivolatile organic compounds has been investigated. Gas phase and particle phase were investigated separately. The SJAC is based on a water condensational growth sampling system. For determination of gaseous compounds an XAD adsorbent cartridge was applied after particle collection. Collection particle efficiency was examined using hydrophobic ...


    By Inderscience Publishers

  • Muddy waters

    Mark Zwinderman of Surface Active Solutions, looks at the dangers involved in the cleaning and maintenance of mud tanks and associated equipment The oil industry involves many thousands of people working daily in potentially hazardous circumstances with dangerous chemicals and sophisticated engineering equipment. There has been a consistent and determined drive by the industry to reduce the ...

  • Multilevel Systems

    Untitled Document Introduction A multilevel system is a groundwater monitoring device which allows ...


    By Solinst Canada Ltd.

  • Our drinking water systems are a disaster. What can we do?

    In the wake of the Flint, communities turn to innovative technology and financing to prevent the next crisis. People in developed countries turn on the tap and safe drinking water flows, a dramatic health benefit they tend to take for granted. That complacency was dramatically disrupted last year when children in Flint, Michigan, started testing positive for lead poisoning and the ...


    By Ensia

  • Water remediation - Stornoway

    Hydrocarbon Contaminated Water Remediation Client: Highlands & Islands Airport Ltd www.hial.co.uk Challenge: To separate free phase and remove dissolved hydrocarbons from a redundant fuel pipe linking a fuelling jetty to storage tanks, across machair and marsh land at the end of the main runway, 1.6km onshore. Applied ...


    By Soilutions Ltd

  • Understanding and Monitoring Hydrocarbons in Water

    Untitled Document 1. Introduction Oil contamination continues to be a very hot topic, due largely in part to recent catastrophic events with shipping ...


    By Arjay Engineering Ltd.

  • Common Treatment Technologies for Explosives in Ground Water, Surface Water, and Leachate

    Explosives-contaminated process waste waters can be subdivided into two categories: red water, which comes strictly from the manufacture of TNT, and pink water, which includes any washwater associated with load, assemble, and pack (LAP) operations or with the demilitarization of munitions involving contact with finished explosive. Despite their names, red and pink water cannot be identified by ...

  • HCL System Exceeds Current Regulations

    Chemron manufactures high-quality specialty chemicals and surfactants for personal care products, industrial, institutional, oil field, mining, coatings, lubricants and water treatment. Some of the operations result in the creation of hydrochloric acid with high variable rates. As expressed by Bill Frost, of Chemron: “Chemronmaintains a strong environmental commitment, which views regulations as ...


  • The Beltran biomass cogeneration system

    An effective, economical solution for harvesting safe, renewable domestic energy, mitigating wastes and achieving environmental goals. Background The Beltran Biomass Cogeneration System (BBCS) is an integrated, three-stage process that uses proprietary gasification technology to convert biomass and other organic wastes into versatile, cleanburning synthesis gas. The purified ...


    By Beltran Technologies, Inc.

  • Development and application of 3D numerical model THREETOX to the prediction of cooling water transport and mixing in the inland and coastal waters

    A modelling system—THREETOX—has been developed to simulate the transport and mixing of cooling water in both freshwater and marine environment. A 3D hydrostatic free-surface model describes the heat dispersion in the far-field, whereas an integral buoyant jet model coupled with a far-field model is applied to the near-field. The equations of hydrodynamics of the far-field model are ...


  • ELECTRONIC WATER TREATMENT REDUCES FOULING AND CORROSION IN PIPELINES

    Increasing pressure loss in the pipeline is often caused by scale corrosion or product fouling of the internal surfaces. This condition slows transmission and distribution capacity, and can require more than just routine maintenance if it remains unaddressed. Interior corrosion, fouling and leakage in pipeline systems will adversely impact bottom-line operations. ...

  • Electronic water treatment reduces fouling in heat exchangers

    The deposition of material on heat transfer surfaces is called fouling which significantly impacts on the thermal and mechanical performance of heat exchangers. Fouling increases the overall thermal resistance and lowers the overall heat transfer coefficient of heat exchangers as well as impeding fluid flow, accelerating corrosion and increasing pressure drop across the heat ...

  • Spray flash evaporator for low-temperature saline water desalination application

    A new spray-type flash evaporator is suggested for the application of saline water desalination. The flash evaporator is 1000 mm in height and 1200 mm in diameter, with a water injection arrangement inside. The evaporator design is based on experiments conducted at vacuum pressures between 10 and 18 mm of Hg, and at saline feed water temperatures between 26?C and 32?C. The saline water is ...


    By Inderscience Publishers

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you