water measurement equipment Articles

  • Development and Application of Oxygen Demand Testing using Industrial Effluent - Case Study

    Abstract The purpose of this study is to develop capacity and protocols for oxygen demand testing that can be used for instruction and research within the BioScience Technology program. For application purposes we chose the PeCOD® Analyzer which offers a unique nanotechnology-based approach to Chemical Oxygen Demand (COD) analysis. Background ...


    By MANTECH

  • Why Water Scale is Dangerous for Equipment

    Mineral scale occurs wherever circulating water exists, and it forms very fast (generally less than 3 weeks). Even a very thin layer, it will also cause insulation, make equipment inefficient, increase cost, and in some serious cases, it will shut down the whole system and even cause explosion. These problems have already existed in different fields, and are becoming worse and worse. ...


    By Mibo International Corp.

  • Water hammer (hydraulic shock) causes and preventative measures

    Water hammer (or hydraulic shock) is the momentary increase in pressure inside a pipe caused by a sudden change of direction or velocity of the liquid in the pipe. Water hammer can be particularly dangerous because the increase in pressure can be severe enough to rupture a pipe or cause damage to equipment. Therefore, the proper opening and closing of valves is fundamental to safe pipeline ...


    By BakerCorp

  • On-Site TPH in Soil Measurements

    On-site analysis of total petroleum hydrocarbon (TPH) concentration levels in soil are easily handled using the InfraCal TOG/TPH Analyzers manufactured by Wilks Enterprise, Inc.  The InfraCal TOG/TPH Analyzers are portable infrared (IR) analyzers that quickly determine TPH levels in less than 10-15 minutes, including the extraction.  Concentrations as low as 10 ppm to well over 10,000 - ...


    By Spectro Scientific

  • Will the equipment match the regulatory method?

    Anyone involved in field analysis of oil in water will con tinually get the question "Does your equipment match the regulatory method?" Zj While the amount of oil in water is highly regulated, it can also be a challenging measurement. It is complicated by the fact that oil comes in many forms and the measurement is defined by the particular regulatory method. When EPA 1664 is the regulatory ...


    By Spectro Scientific

  • ppb Dissolved oxygen measurement

    Dissolved oxygen (D.O.) measurement is one indicator of water quality because oxygen is a common element contributing to corrosion reactions. This corrosion reaction provides the need for low level D.O. control since dissolved oxygen is responsible for costly replacement of piping and equipment by corrosive attack on metah. what is Dissolved Oxygen? Dissolved axygan (D.O.f is the ...


    By IC Controls Ltd.

  • Predicting Bearing Failures and Measuring Lubrication Film Thickness in Your Plants Rotating Equipment

    ABSTRACTTypically there are two options of maintenance concerning bearings, one is to lubricate them the other is to change them. Monitoring bearing condition is critical to insure reliability. The equipment in water and wastewater plants is an asset that must be managed and prolonging its life will insure a positive contribution to your plants operating efficiency. By incorporating a ...

  • Size Reduction Equipment Review

    Untitled Document LAST YEAR, BioCycle was approached by CalRecovery, Inc. - a ...


    By BioCycle Magazine

  • Performance-Based Measurement Systems

    Many of the Environmental Protection Agency's (EPA's) methods used to monitor air, water and soil for environmental contaminants prescribe step-by-step details on how the chemical analysis must be conducted and prohibit any deviations or variations. The EPA has recognized that monitoring equipment and technology have improved tremendously over the last few years; that environmental media do not ...


    By WSP | Parsons Brinckerhoff

  • Analytical Devices for the Measurement of Water Vapor in the Natural Gas Process and Transmission Industry

    ABSTRACT The determination of water vapor (and water dew point) is crucial in the processing, custody transfer and transport of natural gas. High levels of water vapor in a natural gas stream can lead to a number of problems which include the formation of hydrates and the contribution to freezing and corrosion of plant and equipment. There are a number of ways of determining the water vapor ...

  • Water Level Measurement Network Polder Monitoring Areas - Case Study

    Project name Water Level Measurement Network Polder Monitoring Areas Client Rijnland District Water Control Board Country The Netherlands Background and aim project Chris van Vliet (team leader of Sample Taking at HHRS of Rijnland) explains why this project was carried out: “The most ...


    By Eijkelkamp Soil & Water

  • Analytical Devices for the Measurement of Water Vapor and Hydrocarbon Dew-Point in Natural Gas

    Introduction The determination of water vapor (water dew point) is crucial in the processing, custody transfer and transport of natural gas. High levels of water vapor in a natural gas stream can lead to a number of problems which include the formation of hydrates and the contribution to corrosion of plant and equipment. Furthermore, water vapor present in natural gas streams affects the ...

  • GWPD 4—Measuring water levels by use of an electric tape

    VERSION: 2010.1 PURPOSE: To measure the depth to the water surface below land-surface datum using the electric tape method. Materials and Instruments An electric tape, double-wired and graduated in feet, tenths and hundredths of feet. Electric tapes commonly are mounted on a hand-cranked and powered supply reel that contains space ...


    By HERON Instruments Inc.

  • Online measurement with OTT SLD and LogoSens2

    Background The drill called „Wallensteingraben“ connects the Lake of Schwerin with the Hanseatic city Wismar, ending in the Baltic Sea. The Wallensteingraben was originally constructed as channel and is almost 20 km long. In the context of implementing the European Water Framework Directive its ecological passability shall be improved. At the measurement site „Rothentor“ a weir system ...


    By The OTT Hydromet Group

  • Online discharge measurement with OTT SLD

    Background For the economic management of the waterways between Elbe and Oder it is essential to know the discharge of these rivers at defined locks. The authority for water and navigation (WSA) in Lauenburg operates hydrological stations for the measurement of water level and discharge to effectively regulate the water flow at the locks in Plau and Malliß ...


    By The OTT Hydromet Group

  • S.sensing Matrix System, Kurita’s difference in equipment!

    Kurita launched a new modular analyzer system, especially designed for cooling water applications. This integrated system with its range of different controllers and analyzers allows to fit S.sensing MX to practically any application and need. At the same time it is only installed what is really needed at the customer site. The selection of analyzers are based on the real needs: There are ...


    By Kurita

  • A method for measuring saturated hydraulic conductivity in Anisotropic soils

    Saturated hydraulic conductivity (Ks) is an important soil parameter that is difficult to measure, especially in an anisotropic medium. Many methods for determining Ks have been developed over time, but taking different water flow directions into consideration is possible in only a few of them; furthermore, these few methods cannot be universally applied. The method proposed here allows Ks to be ...

  • Reasons to choose Trenchless Pipe Bursting Repairing Equipment

    Trenchless technology has altered the industry, revolutionizing sewer pipe repair and gaining the favor of many property owners today. No digging, no re-landscaping, no use of chemicals- the trenchless strategy is far better than the traditional approach. In the developing business sector, pipe repair companies need the most effective equipment to stay competitive. The ...


    By TRIC Tools Inc.

  • Grounding equipment can prevent costly repairs

    Every remote environmental monitoring station should include a plan for an Earth Ground. All sensors, loggers and telemetry devices should be bonded, or connected, to the Earth Ground in order to protect instrument circuitry from damage due to changes in electric potential. Electric potential is defined as the difference in electrical energy between two points and is typically measured in volts ...

  • Stevens Equipment Records Historical Information During Tsunami

    One of the longest lived products in water resource monitoring has been the Stevens’ chart recorder. In fact, the chart recorder, originally invented by Stevens’ founder and namesake J.C. Stevens in 1911, is the product that established Stevens’ leadership in the water monitoring business.  It’s no surprise then that some of these chart recorders have had long service lives and have recorded ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you