water measurement technology Articles

  • Using FTIR spectroscopy to measure hydrocarbon pollution in water

    According to the World Health Organization (WHO) and UNICEF’s 2015 Progress on Sanitation and Drinking Water report almost 700 million people around the world don’t have access to clean drinking water [1]. Poor water quality is beginning to return to the developed world too. The strain of population growth, intensified agricultural practices and continued industrial expansion have are ...


    By Specac Limited

  • Why You Should Consider a Sample Conditioning Unit for Taking Low NOx Measurements When Using a Portable Emissions Analyzer

    Using state-of-the-art technology, we here at E Instruments create high-quality portable industrial combustion gas and emissions analyzers that are capable of taking precise, low NOx measurements for both NO and NO2. In particular, we recommend our sample conditioning unit to those of you who need to take accurate, low NOx or SO2 ...

  • Methods of Purification by Water Innovations, Inc.

    Carbon Filtration is used for several reasons. Its primary purpose is the reduction of chlorine to less than 0.1 ppm. Chorine can damage softener resins, reverse osmosis membranes, and mixed bed deionization resins. Activated carbon will also help control tastes and odors, provide organic and hazardous organic chemical reduction, and some particulate reduction. ...


    By Water Innovations, Inc

  • Avondale Foods effluent treatment - Case Study

    Introduction Avondale Foods (Craigavon) Ltd. is one of the UK's leading manufacturers and suppliers of coleslaw, wet salads, side salads, vegetable accompaniments, soups, sauces and mayonnaise to retail and foodservice customers throughout Britain and Ireland. The company has a team of over 380 people working in its state-of-the-art facility, with all products being manufactured on the ...


    By Water Tecnik Ltd.

  • Water quality measurement extreme

    Background The characteristics of the Rio Tinto in the south-west of Spain, near Sevilla, are his ruby colour and the extremely sour pH-value between 0 and 2 pH-units. The river carries a mixture between poisonous heavy metals like copper, nickel, arsenic, iron and cadmium, dissolved in high-percent sulphuric acid. It’s not proved where these unusual conditions come from. As per current ...


    By The OTT Hydromet Group

  • Measurement of hydrocarbons in produced water using fiber optic sensor technology

    Due to the non-availability of Freon, there is need for an alternative method to measure the concentration of hydrocarbons in the effluent from oil water separators in use in the oil industry today. Current methods use solvent extraction and IR analysis of water samples. In this paper we present an alternative method, which does not use any solvents and can provide in-situ analysis of the ...


    By PetroSense, Inc

  • Optical measurement of oxygen concentration in water

    The optimisation of oxygen transfer is a key element of control and regulation strategies in municipal and industrial sewage treatment plants. In 2003, HACH LANGE became the first instrument manufacturer to launch the LDO (Luminescent Dissolved Oxygen) method for determining dissolved oxygen in water. The LDO technology is based on pulsed blue light, which brings benefits such as high precision, ...


  • Two Technologies for Flow Measurement from Outside a Pipe

    Doppler and Transit Time are two very popular types of flow meter for non-invasive measurement of flow in full pipes. We tend to confuse these technologies because they are both ultrasonic and both measure flow by using sensors clamped onto the outside of a pipe. In the real world they actually work best in opposite applications. Success in your installation depends on understanding the ...


    By Greyline Instruments Inc.

  • Get the scoop on the newest technology for the measurement of pH

    SENTRON had its 20th birthday in April 2005 and is world wide known as the manufacturer of glass free ISFET (Ion Sensitive Field Effect Transistor) pH systems. During the 20 years we developed and manufactured not only ISFET pH sensors but also pressure sensors in our own silicon chip production facility. This facility for development and manufacturing of solid-state sensors, enables us to ...


    By Sentron Europe BV

  • Water Pressure Measurement with Time Domain Reflectometry Cables

    Attributes of the remote measurement of piezometric water pressure and water level with time domain reflectometry (TDR) techniques are investigated. The evaluation includes a two-wire system for unusually small riser tubes as well as parallel wire and air-filled or hollow coaxial cable for typical installations. Comparison of TDR cable and commercial pressure transducer technology shows coaxial ...


    By ASTM International

  • New Process Gas Analyzer for the Measurement of Water Vapor

    KEYWORDS TDLAS, WMS, Laser Spectroscopy, Water Vapor Measurement, Gas Analyzer ABSTRACT A new analyzer for the measurement of water vapor concentration based on Tunable Diode Laser Absorption Spectroscopy (TDLAS) was developed. The water-vapor line at 1854-nm was selected for the measurement, and the performance of the system was evaluated on different ...

  • Measurement of Hydrocarbons in Produced Water Using Fiber Optic Sensor Technology (An Alternative to Freon Extraction and IR Analysis Methods)

    Due to the non-availability of Freon, there is need for an alternative method to measure the concentration of hydrocarbons in the effluent from oil water separators in use in the oil industry today. Current methods use solvent extraction and IR analysis of water samples. In this paper we present an alternative method, which does not use any solvents and can provide in-situ analysis of the ...


    By PetroSense, Inc

  • Ultrapure water – The standard for resistivity measurements of Ultrapure water - Case Study

    Abstract For years, resistivity/conductivity2 instrumentation has been used as a reliable indicator of ionic water quality, especially for ultrapure water (UPW). Traditionally, the instrumentation is procured, installed, powered up, and perhaps connected to a PLC, strip chart recorder, or a LAN. After that, the instrument and sensor receive no attention until a problem arises. Today, ...


    By SnowPure Water Technologies

  • Unique technology for monitoring piped water

    INTELLITECT WATER has launched a unique, highly innovative drinking water monitoring technology that will revolutionise the delivery of drinking water. The new technology monitors the quality of water in pipeline distribution networks and for the first time provides reliable data to protect the integrity of the water quality, to enhance customer satisfaction and to improve operational efficiency. ...


    By Intellitect Water Ltd

  • Online flow measurement

    Background The undershoot weir in Hohensaaten was built in 1913. It has three openings and regulates the discharge from the Oderbruch and from the Finow canal into the Hohensaaten-Friedrichsthaler-waterway. Moreover, it protects parts of the Oderbruch against Oder floods. The weir controls the waterlevels in the Havel-Oder-waterway and in the reach of Niederfinow- Hohensaaten. ...


    By The OTT Hydromet Group

  • Guide to Measuring Particles in Oil

    Particle counting is a critical aspect of any machine conditioning program and there are many tools out there available to monitor and track the quantity and severity of the contamination, be it due to external contamination or machine wear. The ...


    By Spectro Scientific

  • Cycle chemistry pH measurement

    pH measurement in high purity water has met with variable success. The high resistivity of pure water, the vulnerability to contamination, the variability of reference electrodes and additional temperature effects converge to make tins a particularly challenging measurement. Overcoming these obstacles requires a thorough understanding of the potential problems and their systematic solution. ...


    By SnowPure Water Technologies

  • Performance-Based Measurement Systems

    Many of the Environmental Protection Agency's (EPA's) methods used to monitor air, water and soil for environmental contaminants prescribe step-by-step details on how the chemical analysis must be conducted and prohibit any deviations or variations. The EPA has recognized that monitoring equipment and technology have improved tremendously over the last few years; that environmental media do not ...


    By WSP | Parsons Brinckerhoff

  • OTT ADC measurement - Germany

    Background As the open pit Cottbus Nord is making use of the water of the ponds in the protected landscape of Lakoma (a village 6 km from Cottbus) the Vattenfall Europe Mining AG (VEM) as owner of the pit was obligated to take compensation measurements. VEM entrusted the engineers of the gerstgraser Ingenieurbüro für Renaturierung (gIR) in Cottbus with the planning of the ...


    By The OTT Hydromet Group

  • Measurement of Cesium in Tap Water and Soil by Atomic Absorption Spectrometry

    Recently, technologies that can efficiently remove radioactive cesium (chiefly Cs-137) from water and soil have been actively researched. The study and evaluation of these removal technologies can be conducted using Cs-133, an easy-to-handle, stable substance, yet chemically similar to Cs-137. Cesium can be analyzed using atomic absorption spectrometry and ICP emission spectroscopy, which are ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you