water measuring device Articles

  • How Does a Water Flow Meter Work?

    A water flow meter is a device that measures the amount of water flowing through a pipe. There are several water flow meter technologies to choose from depending on the water measurement application, maintenance requirements, and budgetary terms.  Each of these types of water flow meters has a unique principle of operation, specific application benefits, and overall ...


    By Sierra Instruments, Inc.

  • Recent Federal Developments

    TSCA/FIFRA EPA Extends Comment Period For Draft Guidance For Pesticide Registrants On Notifications, Non-notifications, And Minor Formulation Amendments: On October 5, 2017, the U.S. Environmental Protection Agency (EPA) issued a notice of extension of the comment period for the draft guidance  ...


    By Bergeson & Campbell, P.C.

  • Why LIBS means lower cost of ownership

    Laser Induced Breakdown Spectrometry (LIBS) and X-ray Fluorescence (XRF) handheld analysers are both compact, easy-to-use and fast. Materials can be identified at the pull of a trigger. It’s that simple. Often, cost is a key factor in the decision making process, especially when it comes to thinking about overheads long-term. When both products are comparably priced and have a similar ...

  • Analytical Devices for the Measurement of Water Vapor in the Natural Gas Process and Transmission Industry

    ABSTRACT The determination of water vapor (and water dew point) is crucial in the processing, custody transfer and transport of natural gas. High levels of water vapor in a natural gas stream can lead to a number of problems which include the formation of hydrates and the contribution to freezing and corrosion of plant and equipment. There are a number of ways of determining the water vapor ...

  • Analytical Devices for the Measurement of Water Vapor and Hydrocarbon Dew-Point in Natural Gas

    Introduction The determination of water vapor (water dew point) is crucial in the processing, custody transfer and transport of natural gas. High levels of water vapor in a natural gas stream can lead to a number of problems which include the formation of hydrates and the contribution to corrosion of plant and equipment. Furthermore, water vapor present in natural gas streams affects the ...

  • Effectiveness of water saving devices and educational programs in urban buildings

    In this study different water saving measures (structural and non-structural) were implemented in different urban buildings. A monitoring program of water consumption was carried out to verify and compare the effectiveness of high-efficiency plumbing fixtures and educational programs in different types of buildings (two residential houses, two Middle Schools and two Sport Centres) located in a ...


    By IWA Publishing

  • Application of chlorine resistant polyamide RO membrane for household water filtration device

    Chlorine attacks the polyamide RO membrane to cause membrane failure as measured by enhanced passage of both salt and water. For this reason, activated carbon pre-filters that remove chlorine are typically placed ahead of RO membranes in home drinking water treatment RO system. A general home drinking water treatment system employing RO is composed of preliminary sediment filter, activated carbon ...


    By Toray Chemical Korea

  • Measurement of flow velocity profiles in tank structures using the prototype device OCM Pro LR

    Generally, studies investigating the treatment efficiency of tank structures for storm water or waste water treatment observe pollutant flows in connection with conditions of hydraulic loading. Further investigations evaluate internal processes in tank structures using computational fluid dynamic (CFD) modelling or lab scale tests. As flow paths inside of tank structures have a considerable ...


    By IWA Publishing

  • Measuring Wastewater Below Ground

    Measuring wastewater is one of the most difficult water management tasks that exists. While some wastewater flows are easy to access, others are very hard to measure because they are in open channel conditions and are below grade. If you need to measure below ground wastewater flow, there are a few factors that you need to consider to help you choose the right tool for the job. With a ...


    By TRACOM Inc.

  • Contact-free indirect measurement

    The non-contact mode of measurement is very interesting for hygienic applications in the food-, pharmaceutical- and cosmetics industry, as well as for industrial applications with thick, adhesive and solid containing liquids. Experience has shown that conventional volumetric flow meters quickly come to their limit, while other measuring procedures are often very complex and/or are not suitable ...


    By Lutz Pumpen GmbH

  • Flow Measurement in the Cold

    Measuring flow can be a very delicate process depending on the needs of your operation. For instance, measuring flow in cold weather locations is an extremely difficult task. When outdoor temperatures are near or below freezing, it makes it nearly impossible to measure flow as you would in normal circumstances, meaning you must find alternative solutions so that your operation continues to have ...


    By TRACOM Inc.

  • GWPD 4—Measuring water levels by use of an electric tape

    VERSION: 2010.1 PURPOSE: To measure the depth to the water surface below land-surface datum using the electric tape method. Materials and Instruments An electric tape, double-wired and graduated in feet, tenths and hundredths of feet. Electric tapes commonly are mounted on a hand-cranked and powered supply reel that contains space ...


    By HERON Instruments Inc.

  • Ultrasonic level measurement: a Modern Classic!

    Radar technology has long had the reputation of being the best method of level measurement available - but does this also apply to the wastewater market? Based on its physical characteristics, radar technology certainly offers great flexibility and high performance. However, from an objective standpoint, non-contact level measurement using ultrasound is often the first choice and also the right ...


    By Endress Hauser

  • A simple and flexible field-tested device for housing water monitoring sensors at point discharges

    The Water Monitoring Enclosure (WME) provides a simple and flexible housing for many types of sensors for continuous measurements of water parameters (physical, chemical, or biological) and provides the opportunity of representative sampling for external analyses. The WME ensures a minimum internal water level and this ensures that the internal monitoring equipment remains submerged even when ...


    By IWA Publishing

  • How Not to Lose Cadmium While Measuring?

    Today cadmium finds a better usage than a hundred years ago. For example, metal cadmium plating is used for anticorrosion coatings that are more stable than zinc, nickel and tin-plated. Cadmium plating of steel parts gives greater resistance to corrosion, especially in sea water. About 20% of cadmium goes to the manufacture of cadmium electrodes used in ...


    By Lumex Instruments Group

  • Level measurement of ferric chloride case study

    MonoScan provides ongoing measurement results of Ferric Chloride (FeCl3) solution in one of Israel's most advanced wastewater treatment plant. The Ashdod wastewater treatment plant has invested significantly in state-of-the-art control systems to ensure 100% usage of the wastewater entering its facilities. The plant is self sufficient, by using its own resources providing power, water and gas. ...

  • Colour Measurement as a Tool for Monitoring Oil Quality

    This paper takes a look at the many factors known to have a direct or indirect impact on the quality of oil and the diverse range of different measurement devices have been developed for this purpose, such as relative humidity and absolute water content indicators, particle calculators, dielectric sensors, oxidisation indicators (TAN value), viscosity meters and colour analysers. It explains ...


    By Kytola Instruments Oy

  • Fate Of Polychlorinated Biphenyls In A Contaminated Lake Ecosystem: Combining Equilibrium Passive Sampling Of Sediment And Water With Total Concentration Measurements Of Biota

    Equilibrium sampling devices (ESDs) can be applied to study and monitor the exposure and fate of hydrophobic organic chemicals (HOCs) on a thermodynamic basis. ESDs can be used to determine freely dissolved concentrations and chemical activity ratios, and to predict equilibrium partitioning concentrations of HOCs in biota lipids. Our aim was to assess the equilibrium status of polychlorinated ...


    By John Wiley & Sons, Ltd.

  • Testing and developing energy harvester systems for operation of energy-self-sufficient measurement and control units in drinking water supply

    In recent years, wireless measurement and control units have become more popular for monitoring water distribution systems in the drinking water supply. Electric power supply for a higher number of devices through fixed connections to the public electrical grid is technically complex and requires large investments. Powering monitoring devices, which are installed in areas where electrical ...


    By IWA Publishing

  • Application of passive sampling for measuring dissolved concentrations of organic contaminants in the water column at 3 marine superfund sites

    Currently, there is an effort under way to encourage remedial project managers at contaminated sites to use passive sampling to collect freely dissolved concentrations (Cfree) of hydrophobic organic contaminants to improve site assessments. The objective of the present study was to evaluate the use of passive sampling for measuring water column Cfree for several hydrophobic organic ...


    By John Wiley & Sons, Ltd.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you