water measuring equipment Articles

  • Why Water Scale is Dangerous for Equipment

    Mineral scale occurs wherever circulating water exists, and it forms very fast (generally less than 3 weeks). Even a very thin layer, it will also cause insulation, make equipment inefficient, increase cost, and in some serious cases, it will shut down the whole system and even cause explosion. These problems have already existed in different fields, and are becoming worse and worse. ...


    By Mibo International Corp.

  • Water hammer (hydraulic shock) causes and preventative measures

    Water hammer (or hydraulic shock) is the momentary increase in pressure inside a pipe caused by a sudden change of direction or velocity of the liquid in the pipe. Water hammer can be particularly dangerous because the increase in pressure can be severe enough to rupture a pipe or cause damage to equipment. Therefore, the proper opening and closing of valves is fundamental to safe pipeline ...


    By BakerCorp

  • ppb Dissolved oxygen measurement

    Dissolved oxygen (D.O.) measurement is one indicator of water quality because oxygen is a common element contributing to corrosion reactions. This corrosion reaction provides the need for low level D.O. control since dissolved oxygen is responsible for costly replacement of piping and equipment by corrosive attack on metah. what is Dissolved Oxygen? Dissolved axygan (D.O.f is the ...


    By IC Controls Ltd.

  • On-Site TPH in Soil Measurements

    On-site analysis of total petroleum hydrocarbon (TPH) concentration levels in soil are easily handled using the InfraCal TOG/TPH Analyzers manufactured by Wilks Enterprise, Inc.  The InfraCal TOG/TPH Analyzers are portable infrared (IR) analyzers that quickly determine TPH levels in less than 10-15 minutes, including the extraction.  Concentrations as low as 10 ppm to well over 10,000 - ...


    By Spectro Scientific

  • Performance-Based Measurement Systems

    Many of the Environmental Protection Agency's (EPA's) methods used to monitor air, water and soil for environmental contaminants prescribe step-by-step details on how the chemical analysis must be conducted and prohibit any deviations or variations. The EPA has recognized that monitoring equipment and technology have improved tremendously over the last few years; that environmental media do not ...


    By WSP | Parsons Brinckerhoff

  • Will the equipment match the regulatory method?

    Anyone involved in field analysis of oil in water will con tinually get the question "Does your equipment match the regulatory method?" Zj While the amount of oil in water is highly regulated, it can also be a challenging measurement. It is complicated by the fact that oil comes in many forms and the measurement is defined by the particular regulatory method. When EPA 1664 is the regulatory ...


    By Spectro Scientific

  • Size Reduction Equipment Review

    Untitled Document LAST YEAR, BioCycle was approached by CalRecovery, Inc. - a ...


    By BioCycle Magazine

  • Predicting Bearing Failures and Measuring Lubrication Film Thickness in Your Plants Rotating Equipment

    ABSTRACTTypically there are two options of maintenance concerning bearings, one is to lubricate them the other is to change them. Monitoring bearing condition is critical to insure reliability. The equipment in water and wastewater plants is an asset that must be managed and prolonging its life will insure a positive contribution to your plants operating efficiency. By incorporating a ...

  • GWPD 4—Measuring water levels by use of an electric tape

    VERSION: 2010.1 PURPOSE: To measure the depth to the water surface below land-surface datum using the electric tape method. Materials and Instruments An electric tape, double-wired and graduated in feet, tenths and hundredths of feet. Electric tapes commonly are mounted on a hand-cranked and powered supply reel that contains space ...


    By HERON Instruments Inc.

  • Water vapour permeation measurement for PV Solar Cell packaging

    With fears of carbon dioxide causing global warming and diminishing supplies of fossil fuels, a looming energy crisis is affecting all countries.  As a consequence, a great deal of world-wide effort is going into the development of alternative energy technologies.  At present, wind, hydro and geothermal are becoming well established with more niche roles for tidal and solar. The latter ...


    By Systech Instruments Ltd

  • Analytical Devices for the Measurement of Water Vapor in the Natural Gas Process and Transmission Industry

    ABSTRACT The determination of water vapor (and water dew point) is crucial in the processing, custody transfer and transport of natural gas. High levels of water vapor in a natural gas stream can lead to a number of problems which include the formation of hydrates and the contribution to freezing and corrosion of plant and equipment. There are a number of ways of determining the water vapor ...

  • Online discharge measurement with OTT SLD

    Background For the economic management of the waterways between Elbe and Oder it is essential to know the discharge of these rivers at defined locks. The authority for water and navigation (WSA) in Lauenburg operates hydrological stations for the measurement of water level and discharge to effectively regulate the water flow at the locks in Plau and Malliß ...


    By The OTT Hydromet Group

  • Water Level Measurement Network Polder Monitoring Areas - Case Study

    Project name Water Level Measurement Network Polder Monitoring Areas Client Rijnland District Water Control Board Country The Netherlands Background and aim project Chris van Vliet (team leader of Sample Taking at HHRS of Rijnland) explains why this project was carried out: “The most ...


    By Eijkelkamp Soil & Water

  • Analytical Devices for the Measurement of Water Vapor and Hydrocarbon Dew-Point in Natural Gas

    Introduction The determination of water vapor (water dew point) is crucial in the processing, custody transfer and transport of natural gas. High levels of water vapor in a natural gas stream can lead to a number of problems which include the formation of hydrates and the contribution to corrosion of plant and equipment. Furthermore, water vapor present in natural gas streams affects the ...

  • Online measurement with OTT SLD and LogoSens2

    Background The drill called „Wallensteingraben“ connects the Lake of Schwerin with the Hanseatic city Wismar, ending in the Baltic Sea. The Wallensteingraben was originally constructed as channel and is almost 20 km long. In the context of implementing the European Water Framework Directive its ecological passability shall be improved. At the measurement site „Rothentor“ a weir system ...


    By The OTT Hydromet Group

  • Measuring level of crude oil case study

    MonoScan provides an economical ultrasonic solution for measuring level of crude oil in one of Kaliningrad's well known oil fields. The Eastern Gorino oil field located in Gorino, Kaliningrad near the border of Lithuania, contains 11 oil wells and is capable of producing 200 tons of crude oil per day. The Kaliningrad Geological Oil & Gas company, which owns the field, sought a solution for ...

  • A method for measuring saturated hydraulic conductivity in Anisotropic soils

    Saturated hydraulic conductivity (Ks) is an important soil parameter that is difficult to measure, especially in an anisotropic medium. Many methods for determining Ks have been developed over time, but taking different water flow directions into consideration is possible in only a few of them; furthermore, these few methods cannot be universally applied. The method proposed here allows Ks to be ...

  • Reasons to choose Trenchless Pipe Bursting Repairing Equipment

    Trenchless technology has altered the industry, revolutionizing sewer pipe repair and gaining the favor of many property owners today. No digging, no re-landscaping, no use of chemicals- the trenchless strategy is far better than the traditional approach. In the developing business sector, pipe repair companies need the most effective equipment to stay competitive. The ...


    By TRIC Tools Inc.

  • Grounding equipment can prevent costly repairs

    Every remote environmental monitoring station should include a plan for an Earth Ground. All sensors, loggers and telemetry devices should be bonded, or connected, to the Earth Ground in order to protect instrument circuitry from damage due to changes in electric potential. Electric potential is defined as the difference in electrical energy between two points and is typically measured in volts ...

  • Tips and resources for measuring sustainable purchasing programs

    How many times have we heard it, "You can't manage what you don't measure"? It's  a management consulting mantra that is repeated so often you could almost tune it out. "Yes, of course" we affirm to our peers and colleagues. But inwardly most of us would agree that developing good key performance indicators (KPIs) and accurate tracking mechanisms are generally underdeveloped across the ...


    By GLOBE Foundation

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you