water measuring instrument Articles

  • Tech Tip: Deploying Sea-Bird CTD in Ice

    Large numbers of Sea-Bird conductivity instruments have been used in Arctic and Antarctic programs. Special accommodation to keep temperature, conductivity, oxygen, and optical sensors at or above 0° C is advised. Often, the CTD is brought inside protective doors between casts to achieve this. Conductivity Cell When freezing is possible, we ...

  • ´More Stations. More Data. Better Forecasts.´ – the NYS Mesonet

    “More Stations. More Data. Better Forecasts.” – that’s the slogan of New York State Mesonet. The weather observation network consists of a total of 125 weather stations all over the state of New York and Lufft was selected as one of the vendors to support them in capturing the data. All 125 of the weathers stations have the standard instrumentation suite. Of those 125, 17 ...

  • The productive environmental laboratory: BSK Labs boosts efficiency with Metrohm IC

    BSK Labs runs a number of environmental laboratories and service centers along the west coast of the US. A total of 70 employees – including microbiologists, chemists, lab technicians, and support staff – make sure that the 200 to 350 samples that come in every week are analyzed. BSK Labs specializes in potable water chemistry, ground water monitoring, storm water runoff, solid waste ...


    By Metrohm AG

  • Hydraulic Fracturing and the Environment Whitepaper - Analytical and Measuring Instruments

    The recovery of natural gas and oil from untraditional wells is necessary for the economic stability of the United States. Shale gas deposits are deep below the earth’s surface and recovery of gas is expensive and requires millions of gallons of water mixed with chemicals, known as "fracking solution". Most fracking solution stays underground or returns to the surface mixed with formation ...

  • Understanding Oil-in-Water Instrument Specifications

    The measurement capabilities of oil-in-water analysis methods are described by several analytical figures-of-merit. Examples are: Range (Linear and Dynamic) Limit of Detection (LOD) Limit of Quantification (LOQ) Precision (Repeatability and Reproducibility) Sensitivity Accuracy Response Time Some or all of these are often specified by customers in the bid packages issued when selecting a ...

  • Optical measurement of oxygen concentration in water

    The optimisation of oxygen transfer is a key element of control and regulation strategies in municipal and industrial sewage treatment plants. In 2003, HACH LANGE became the first instrument manufacturer to launch the LDO (Luminescent Dissolved Oxygen) method for determining dissolved oxygen in water. The LDO technology is based on pulsed blue light, which brings benefits such as high precision, ...


  • Water Level Measurements-Part 1

    Confused about which instrumentation to use in your water level monitoring system? In-Situ offers two categories of pressure sensors for water level measurements: absolute or non-vented sensors, and gauged or vented sensors. They look the same and both measure pressure and water level, but they have drastically different applications, outputs and accuracy. The absolute (or non-vented) water level ...


    By In-Situ, Inc.

  • The soldier salesman: field instrumentation

    “The victorious strategist only seeks battle after the victory has been won, whereas he who is destined for defeat first fights and afterwards looks for victory.” — Sun Tzu, The Art of War These words may apply to warfare, and though they were written over two thousand years ago by a Chinese general, they could not be more accurate than when applied to today’s sales ...


    By HM Digital, Inc.

  • New Process Gas Analyzer for the Measurement of Water Vapor

    KEYWORDS TDLAS, WMS, Laser Spectroscopy, Water Vapor Measurement, Gas Analyzer ABSTRACT A new analyzer for the measurement of water vapor concentration based on Tunable Diode Laser Absorption Spectroscopy (TDLAS) was developed. The water-vapor line at 1854-nm was selected for the measurement, and the performance of the system was evaluated on different ...

  • Instrumentation and Operational Considerations for On-Line pH Measurement in Samples Below 10µS/cm Conductivity

    Ordinarily pH measurements are made in water with 1,000 to 10,000 µS/cm conductivity. The conductivity comes from dissolved solids which are typically salts but also acid or base. These dissolved substances are in the solution in ion form which makes such solutions conducting. With conductivities of 1,000 µS/ cm or more, an ample supply of mobile ions provides pH electrodes with a ...


    By IC Controls Ltd.

  • Grain size distribution and sediment flux structure in a river profile, measured with a LISST-SL instrument

    Abstract New data on sediment transport in a river are reported using a LISST-SL laser diffraction instrument that simultaneously measures velocity, optical transmission, depth, temperature, and sediment particle size distribution (PSD) isokinetically. Suspended sediment concentration (SSC)is obtained from the sum of PSD. Optical transmission is seen to be nearly constant in the top ...


    By Sequoia Scientific, Inc.

  • What is the acceptance angle of the LISST instruments?

    The acceptance angle of the LISST-100X / LISST-STX transmission measurement differs between instruments: IN AIR, the LISST-100X type C has an acceptance angle of 0.0177 degrees while a type B has an acceptance angle of 0.0353 degrees. The discontinued LISST-FLOC had an acceptance angle of 0.0058 degrees. The IN WATER values goes as 1/n, where n is the refractive index of seawater ...


    By Sequoia Scientific, Inc.

  • Barrier Quality of Pharmaceutical Blister Packaging measured using Systech Illinois WVTR and OTR instruments

    Since 1967 Tekni-Plex, Inc, has provided solutions for innovative packaging and tubing products.  For their clients in the pharmaceutical and medical industries, the company has specialized in the development and manufacture of blister films offering superior barrier against ingress and egress of moisture and oxygen. In 2011 Tekni-Plex set up a Global Technology Center in Holland, Ohio, ...


    By Systech Instruments Ltd

  • Tekran instruments—monitoring around the world

    Tekran provides trace-level mercury analytical and monitoring technology for a variety of applications including laboratory-based sample analysis, continuous point-source emissions and ambient air monitoring. This article focuses on and highlights the results of an application of Tekran’s Ambient Air Mercury Speciation System. In contrast to most other heavy metals, mercury (Hg) and mercury ...

  • Ultrapure water – The standard for resistivity measurements of Ultrapure water - Case Study

    Abstract For years, resistivity/conductivity2 instrumentation has been used as a reliable indicator of ionic water quality, especially for ultrapure water (UPW). Traditionally, the instrumentation is procured, installed, powered up, and perhaps connected to a PLC, strip chart recorder, or a LAN. After that, the instrument and sensor receive no attention until a problem arises. Today, ...


    By SnowPure Water Technologies

  • Partech Water Instruments Case Study: China’s Success with Partech’s Clever Sensors!

    Ronghuai Water Group uses Partech water instruments in 20 of their water plants across China! Currently, the Watertechw2 pH8000 and TurbiTechw2 LA sensors are used in the plants. The ...


    By Partech (Electronics) Ltd.

  • Dairy Crest – Dairy Effluent Treatment Case Study and Partech Water Instruments

    In order to comply with environmental regulations, the food and beverage industry relies heavily on constant monitoring and control of wastewater and effluent, before discharge from the plant. Additionally, if process plants fail to be vigilant when it comes to monitoring all areas of waste treatment, the results can be unsuccessful. Partech’s water instruments are ...


    By Partech (Electronics) Ltd.

  • ppm Dissolved oxygen measurement

    Dissolved oxygen (D.O.) levels are used as a general indicator of water quality. Oxygen is essential to life and vital for countless aquatic forms. D.O. level control is critical in numerous applications ranging from the monitoring of industrial waste water to environmental surveillance. What is Dissolved Oxygen? Dissolved oxygen (D.O.) is the amount of oxygen gas dissolved in a ...


    By IC Controls Ltd.

  • ppb Dissolved oxygen measurement

    Dissolved oxygen (D.O.) measurement is one indicator of water quality because oxygen is a common element contributing to corrosion reactions. This corrosion reaction provides the need for low level D.O. control since dissolved oxygen is responsible for costly replacement of piping and equipment by corrosive attack on metah. what is Dissolved Oxygen? Dissolved axygan (D.O.f is the ...


    By IC Controls Ltd.

  • Measuring TOC in Brine Solutions

    In the chlor-alkali and electrolysis industries, as well as many others, there is a need to analyze for TOC in samples containing high salt concentrations. These samples can range from sea water, which is typically 3% salt, up to brine solutions containing 28% salt. Shimadzu’s TOC-L with the high salt kit (P/N 638-93176-01 for N model & P/N 638-93176-02 for H model) is well suited for ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you