water measuring technology Articles

  • 100 Simple Ways To Save Water

    To improve water conservation install a rain sensor, it turns off your irrigation when it rains. Use a weather-based controller. The use of smart controllers can reduce water usage 24% a year on average. Learn about available rebate programs ...


    By Jain Irrigation, Inc

  • Senix Water Level Sensors Drive Irrigation Automation Project

    Australia’s Water Crisis Irrigation management is serious business in Australia especially within the Murray-Darling Basin, a 1,000,000 square kilometer watershed that is home to Australia’s most productive agricultural land. The basin’s 23 rivers have ...


    By Senix Corporation

  • Reasons to choose Trenchless Pipe Bursting Repairing Equipment

    Trenchless technology has altered the industry, revolutionizing sewer pipe repair and gaining the favor of many property owners today. No digging, no re-landscaping, no use of chemicals- the trenchless strategy is far better than the traditional approach. In the developing business sector, pipe repair companies need the most effective equipment to stay competitive. The ...


    By TRIC Tools Inc.

  • Case study - Procurement and installation of a Biogas desulphurization unit at the Chania WWTP

    A proposal based on Bioconservacion’s technology was selected as the winning bid in the public tender released in 2015, covering the design, procurement and construction of a biogas desulfurizing unit to be installed in the waste water treatment plant in Chania, Greece. With a population over 100,000, Chania is the second largest municipality in the Greek island of Crete. Its waste water ...


    By Bioconservacion SA

  • Seven Ways Your Facility Isn’t Meeting Effluent Regulations and How to Solve Them

    Whether you own, operate, or help manage a municipal or industrial facility that deals with wastewater, it’s important to understand how wastewater treatment can play a significant role in the overall health of your business, especially when it comes to meeting effluent regulations. This is an important part of the wastewater treatment process to consider, as ignoring it could earn your ...


    By SAMCO Technologies, Inc.

  • Water quality measurement extreme

    Background The characteristics of the Rio Tinto in the south-west of Spain, near Sevilla, are his ruby colour and the extremely sour pH-value between 0 and 2 pH-units. The river carries a mixture between poisonous heavy metals like copper, nickel, arsenic, iron and cadmium, dissolved in high-percent sulphuric acid. It’s not proved where these unusual conditions come from. As per current ...

  • Measurement of hydrocarbons in produced water using fiber optic sensor technology

    Due to the non-availability of Freon, there is need for an alternative method to measure the concentration of hydrocarbons in the effluent from oil water separators in use in the oil industry today. Current methods use solvent extraction and IR analysis of water samples. In this paper we present an alternative method, which does not use any solvents and can provide in-situ analysis of the ...


    By PetroSense, Inc

  • Optical measurement of oxygen concentration in water

    The optimisation of oxygen transfer is a key element of control and regulation strategies in municipal and industrial sewage treatment plants. In 2003, HACH LANGE became the first instrument manufacturer to launch the LDO (Luminescent Dissolved Oxygen) method for determining dissolved oxygen in water. The LDO technology is based on pulsed blue light, which brings benefits such as high precision, ...


  • Get the scoop on the newest technology for the measurement of pH

    SENTRON had its 20th birthday in April 2005 and is world wide known as the manufacturer of glass free ISFET (Ion Sensitive Field Effect Transistor) pH systems. During the 20 years we developed and manufactured not only ISFET pH sensors but also pressure sensors in our own silicon chip production facility. This facility for development and manufacturing of solid-state sensors, enables us to ...


    By Sentron Europe BV

  • Two Technologies for Flow Measurement from Outside a Pipe

    Doppler and Transit Time are two very popular types of flow meter for non-invasive measurement of flow in full pipes. We tend to confuse these technologies because they are both ultrasonic and both measure flow by using sensors clamped onto the outside of a pipe. In the real world they actually work best in opposite applications. Success in your installation depends on understanding the ...


    By Greyline Instruments Inc.

  • Water Pressure Measurement with Time Domain Reflectometry Cables

    Attributes of the remote measurement of piezometric water pressure and water level with time domain reflectometry (TDR) techniques are investigated. The evaluation includes a two-wire system for unusually small riser tubes as well as parallel wire and air-filled or hollow coaxial cable for typical installations. Comparison of TDR cable and commercial pressure transducer technology shows coaxial ...


    By ASTM International

  • New Process Gas Analyzer for the Measurement of Water Vapor

    KEYWORDS TDLAS, WMS, Laser Spectroscopy, Water Vapor Measurement, Gas Analyzer ABSTRACT A new analyzer for the measurement of water vapor concentration based on Tunable Diode Laser Absorption Spectroscopy (TDLAS) was developed. The water-vapor line at 1854-nm was selected for the measurement, and the performance of the system was evaluated on different ...

  • Measurement of Hydrocarbons in Produced Water Using Fiber Optic Sensor Technology (An Alternative to Freon Extraction and IR Analysis Methods)

    Due to the non-availability of Freon, there is need for an alternative method to measure the concentration of hydrocarbons in the effluent from oil water separators in use in the oil industry today. Current methods use solvent extraction and IR analysis of water samples. In this paper we present an alternative method, which does not use any solvents and can provide in-situ analysis of the ...


    By PetroSense, Inc

  • Unique technology for monitoring piped water

    INTELLITECT WATER has launched a unique, highly innovative drinking water monitoring technology that will revolutionise the delivery of drinking water. The new technology monitors the quality of water in pipeline distribution networks and for the first time provides reliable data to protect the integrity of the water quality, to enhance customer satisfaction and to improve operational efficiency. ...


    By Intellitect Water Ltd

  • Ultrapure water – The standard for resistivity measurements of Ultrapure water - Case Study

    Abstract For years, resistivity/conductivity2 instrumentation has been used as a reliable indicator of ionic water quality, especially for ultrapure water (UPW). Traditionally, the instrumentation is procured, installed, powered up, and perhaps connected to a PLC, strip chart recorder, or a LAN. After that, the instrument and sensor receive no attention until a problem arises. Today, ...


    By SnowPure Water Technologies

  • Performance-Based Measurement Systems

    Many of the Environmental Protection Agency's (EPA's) methods used to monitor air, water and soil for environmental contaminants prescribe step-by-step details on how the chemical analysis must be conducted and prohibit any deviations or variations. The EPA has recognized that monitoring equipment and technology have improved tremendously over the last few years; that environmental media do not ...


    By WSP | Parsons Brinckerhoff

  • Online flow measurement

    Background The undershoot weir in Hohensaaten was built in 1913. It has three openings and regulates the discharge from the Oderbruch and from the Finow canal into the Hohensaaten-Friedrichsthaler-waterway. Moreover, it protects parts of the Oderbruch against Oder floods. The weir controls the waterlevels in the Havel-Oder-waterway and in the reach of Niederfinow- Hohensaaten. ...

  • Guide to Measuring Particles in Oil

    Particle counting is a critical aspect of any machine conditioning program and there are many tools out there available to monitor and track the quantity and severity of the contamination, be it due to external contamination or machine wear. The ...


    By Spectro Scientific

  • Cycle chemistry pH measurement

    pH measurement in high purity water has met with variable success. The high resistivity of pure water, the vulnerability to contamination, the variability of reference electrodes and additional temperature effects converge to make tins a particularly challenging measurement. Overcoming these obstacles requires a thorough understanding of the potential problems and their systematic solution. ...


    By SnowPure Water Technologies

  • OTT ADC measurement - Germany

    Background As the open pit Cottbus Nord is making use of the water of the ponds in the protected landscape of Lakoma (a village 6 km from Cottbus) the Vattenfall Europe Mining AG (VEM) as owner of the pit was obligated to take compensation measurements. VEM entrusted the engineers of the gerstgraser Ingenieurbüro für Renaturierung (gIR) in Cottbus with the planning of the ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you