water meter reading Articles

  • Consumption estimation with a partial automatic meter reading deployment

    Automatic water meter reading (AMR) is now the best kind of technology to supply real time information on water consumption. Complete equipment of a district metered area enables the assessment of the total consumption of a finite size population, for a time scale sometimes as short as an hour. However, its cost for generalization can generate high capital expenditures (CAPEX), unaffordable for ...


    By IWA Publishing

  • Soil CO2 Flux Measurements -- Addressing Spatial Variability: Determining the Number of Readings Required

    Soils can be highly variable in terms of CO2 flux values. Even at a seemingly uniform site, the soil CO2 flux might range from 2 μmol/m2/s at one location to over 4 mol/m2/s just a few meters away. To obtain reliable site mean flux values, it is important to determine how many readings might be required so that time and resources can be properly allocated before starting an investigation. In ...


    By LI-COR

  • Electronic Water Meter For Leakage Repair - Case Study

    Every year, EMS (Energy Management System) produces and markets smart electronic water meters (domestic/ bulk), wireless transmission data logger (GSM/ GPRS), and advanced AMR (Automatic Metering Reading) systems. Unlike traditional mechanical water meter, the magnet-free electronic smart water meter with class C (CNS 14866) metrological performance can maintain 12 years battery lifespan. With a ...

  • Portable Hydrant Flow Meters

    Leading the way for hydrant verification flow and pressure measurement Langham Industrial Controls strive to provide the most innovative market leading hydrant verification instrumentation. The Horizontal Standpipe Flow Meter provides unrivalled accuracy of ± 0.5% within a wide flow range. The swan neck design ensures that the AquaMasters electromagnetic sensor is always full and as the ...

  • TDS and EC meters for hydroponics explained

    As technology advances, questions inevitably follow. Due to the rapid growth of the hydroponics and indoor gardening industry, it is important for growers to be familiar with the technology, in this case instrumentation. There is a myriad of nutrients and fertilizers available to help you cultivate the best possible plant yields, but what is consistent among all of them is they need to be ...


    By HM Digital, Inc.

  • Case Studies Demonstrate the Implications of Metering Errors

    General anomalies that occur in the management of apparent losses are identified and include determination of apparent loss indicators that fail to take into account both the random and bias errors inherent in metering. Estimating the volume of water losses that could be attributed to meter errors is also incorrectly assumed to be equivalent to the error limits (i.e. envelope) stipulated in ...


    By IWA Publishing

  • Flowmeter Portable Handhold Ultrasonic Flow Meter

    The Technologists from A.YITE Electronic(America) Laboratory, have done much efforts to design portable ultrasonic flowmeter, we would like to supply suitable measurement for the travelling engineer.  There is no moving part in the EU-109H ultrasonic instrument, which is a kind of movable and reliable static instrument. With its accuracy up to 0.8% and comparatively large dynamic ...


    By A.YITE Technology

  • TLC meter “how-to” video: two-point user calibration

    A Solinst TLC Meter measures water level, temperature, and conductivity. To ensure accuracy of readings, the user can easily calibrate the Meter for conductivity, as required. User calibration allows for adjustment of a TLC Meter if the probe has been altered slightly due to mechanical, biological or chemical affects. If a TLC Meter is tested in standard calibration solution, and the readings are ...


    By Solinst Canada Ltd.

  • A CFD study of the effect of venturi geometry on high pressure wet gas metering

    Venturi meter is increasingly being preferred as wet gas flow meter because of its simple construction and ease of operation. It has been found that the performance of venturi in single phase gas is very different from that of water. In this work, with a view to optimise the design, the effects of diameter, diameter ratio and convergent angle on the performance of a venturi meter for wet gas ...


    By Inderscience Publishers

  • DFM 5.0 doppler flow meter for frac sand slurry flow monitoring

    CanFrac Sands Ltd. of Lloydmister Saskatchewan (Canada) needed a flowmeter that could accurately measure sand slurry flow without being damaged by this highly abrasive product. They selected the Greyline DFM 5.0 Doppler Flow Meter with a clamp-on ultrasonic sensor mounted on the outside of a pipe. CanFrac produce “fracturing sand” used by the oil and gas industry. This special type of ...


    By Greyline Instruments Inc.

  • CMOM Workshop, Austin, Texas - Capacity Assurance by Metering and Modeling

    Untitled Document Why is flow metering important? ...


    By Innovyze

  • Multivariate consumption profiling (MCP) for intelligent meter systems: a methodology to define categories and levels

    Multivariate Consumption Profiling (MCP) is a methodology to analyse the readings made by Intelligent Meter (IM) systems. Even in advanced water companies with well supported IM, full statistical analyses are not performed, since no efficient methods are available to deal with all the data items. Multivariate Analysis has been proposed as a convenient way to synthesise all IM information. MCP ...


    By IWA Publishing

  • Wastewater Plant Relies on Thermal Flow Meter for Co-Gen Power Gas Blending Process

    The Rahway Valley Sewerage Authority (RVSA), which operates a large wastewater treatment plant in New Jersey, embarked on a green co-generation waste-to-energy project to power a portion of its operations. The plant performs primary, secondary, tertiary and sludge treatment processes in serving over 250,000 residential customers and 3000 industrial and commercial customers in a 40-plus square ...


    By Modern Pumping Today

  • Efficient Waste Water Treatment

    Clean drinking water is an essential need of mankind. Often surface water like rivers or lakes is used as drinking water source. To prevent these resources from pollution the effective treatment of waste water is a must. For example in China 75% of discharged waste water is coming from pulp and paper, textile and dyeing industries. To run a waste water treatment plant in the most efficient way ...


    By J.V. Niebergall CDH

  • Testing for Nitrates in Water, what are the Options?

    Nitrate is a naturally occurring substance in the environment and is commonly found in most water sources, it is usually only a cause for concern in areas where water supplies can be affected by farm runs offs and agriculture, its use as a fertiliser can cause increased levels in water supplies The ...


    By Camlab Limited

  • Unique technology for monitoring piped water

    INTELLITECT WATER has launched a unique, highly innovative drinking water monitoring technology that will revolutionise the delivery of drinking water. The new technology monitors the quality of water in pipeline distribution networks and for the first time provides reliable data to protect the integrity of the water quality, to enhance customer satisfaction and to improve operational efficiency. ...


    By Intellitect Water Ltd

  • The mystery of electronic water treatment unveiled

    The problems of scale are well known to those living and working in "hard" water areas. Scale is the undesirable consequence of water supplies becoming super-saturated with dissolved minerals.  These problems are of greater significance if found in industrial water systems and commercial buildings. Scaling problems commonly occur, even in "soft" water areas, when a fluid stream is ...

  • Analysis of PCB in water using the Dtech test system

    MATRIX: Water ANALYTE: PCB LIMIT OF DETECTION: Color Card: 100 ppb (as aroclor 1254), DTECHTOR meter: 50 ppb (as aroclor 1254) BACKGROUND: This application describes a field screening method for determining PCB concentrations in water. A 1:2 dilution of the sample in methanol is made to minimize adsorptive losses. A ...


  • Evaluation of statistical sampling for the assessment of residential consumption totals in water distribution networks

    The paper provides insights into stratified sampling, a standard statistical technique that may be employed to assess domestic water use in water distribution networks. The basic idea is to use only a few meters to provide inference on the total water consumption of a network or of a district metered area through the knowledge of some additional stratification variables, such as household ...


    By IWA Publishing

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you