water mixer Articles

  • Mixers and Flowmakers: Mixers at BNR plant in Borås, Sweden

    Borås Treatment Plant, the Gässlösaverket, is situated at the river Viskan which is also the recipient. The plant is the largest single discharge to the Viskan, and since the water does not pass any lakes on its way to the sea, the reduction of nitrogen is small. Due to requirements with regard to the reduction of nitrogen discharge set out by the Swedish environmental authorities, the Borås ...


    By Landia

  • Converting a Major Water Treatment Plant: Westfall Mixer Answers the Needs

    The Challenge: Plant Conversion While Maintaining Water QualityThe Portland Water District needed to convert a major chlorine gas feed system to liquid sodium hypochlorite in order to eliminate hazards associated with gas systems and to enhance chlorine residual throughout the distribution system. Wright-Pierce was selected to engineer the project. The largest water treatment facility in ...

  • Mixers and Flowmakers: Mixing mine water precipitate from a Tin Mine in the UK

    Landia (UK) Ltd. was awarded a contract to provide the pre-reaction chambers and sludge holding tanks at Wheal Jane Mine Water Treatment Plant, Cornwall with a total number of 7 submersible mixers. Working conditions are very harsh on this plant where the mixers will be homogenizing sludges in the process of purifying a heavily contaminated industrial effluent. The mixers were supplied in ...


    By Landia

  • Drum mixer compounds wide range of particles... and a modified paddle mixer solves a tricky problem

    In 1985 Mortex Manufacturing Co., Inc., bought a new rotary drum mixer in anticipation of expanding its line of chemical additives that are used to make decorative, nonskid coatings for concrete around swimming pools and on patios. The additives are mixed with white cement and white ...

  • In-line mixer handles tough blending job - tomato paste and water at 100 gpm

    Citrus World, Florida’s third largest fruit co-op, recently expanded its product line to include tomato juices. In doing so, the Lake Wales based processor ran across a difficult blending problem. Daniel Cronin, engineer on the project, says the co-op tried various vessels and mechanical mixing devices, in attempts to blend viscous tomato paste and water. None proved adequate, including ...


    By Komax Systems, Inc.

  • Japanese metal powder manufacturer relies on U.S. Rotary Batch Mixer

    Nippon Atomized Metal Powders Corporation uses a patented water-jet atomization process to make high-quality super-fine metal powders from copper, bronze, brass, silver, gold, and stainless steel that are of consistent composition and particle size. Nippon Atomized Metal Powders refined the process of water-jet atomization to produce metal powders with well-shaped, uniform particles in the range ...

  • KLa Jet Aerators/Mixers for Large Diameter Equalization Tanks - Case Study

    Flow Equalization Many municipalities are facing the challenge of having to equalize large volumes of storm water sometimes mixed with raw sewage in order to continuously meet their permit limitations. The equalized flow is stored during a storm event and then slowly diverted to the treatment facility when influent flows return to normal levels.  In the past few years the need ...


    By KLa Systems, Inc.

  • Komax teflon lined mixer simplifies acid injection for power plant

    A major source of waste water in many power plants is the waste stream that results from ion exchange used for demineralizing the boiler feed water. The alkaline regeneration waste stream produced by the ion exchange process requires the addition of an acid to this stream before discharge from the plant. Regulatory authorities typically require the effluent to have a near neutral pH before ...


    By Komax Systems, Inc.

  • The design of static mixer heat transfer equipment for adhesives, sealants, resins and polymers.

    The fluids handled within the adhesives and sealant industries are amongst the most difficult to handle of any in the main process industries globally. The characteristics which make them particularly difficult to handle include: High viscosities (typically 1-2000 Pa.s, or 1000 to 2 million cP). Often non-Newtonian (viscosity is not constant and varies with shear rate). Some ...


    By National Oilwell Varco

  • Bulk nutritional supplements blended in pharmaceutical grade rotary mixer

    Daily Manufacturing, Inc. (www.daily-mfg.com) is a small, family oriented business committed to producing high quality nutritional products from natural sources such as vitamins and minerals, digestive aids ranging from activated charcoal to probiotics, herbs and special combinations of these ingredients. Founded in 1979 by James and Mary Jo Daily, the company ...

  • Start up of Indonesian Cinnamon Plant employs screen classifying cutter, rotary mixer

    Starting up a new process plant can be a tricky business for any company, but when it is the first plant the company has ever built and the location is halfway around the world from equipment suppliers, the project can be daunting. So it was with ForesTrade, Inc., when it set about building Indonesia's first state-of-the-art organic cinnamon-processing plant and an associated essential oils plant ...

  • Designed for generations, water & wastes digest

    Nearly 25 years ago, the consulting engineering firm Banner & Associate, Inc. designed an efficient wastewater treatment facility for the city of Madison, S.D., that featured process control, flexibility and treatment efficiency while minimizing operating and maintenance costs. Key to the system was the aspirator aeration system that supplied reliable oxygenation and mixing to the oxidation ...

  • Water Treatment Plant (Drinking Water) Indian Oil Corporation Limited, India

    W.O.G Groups responded to the challenge of providing safe drinking water to the Indian Oil Corporation Limited township by undertaking a Drinking Water Treatment Plant of Capacity 5.76 MLD, including 1 year O&M. CHALLENGE: The raw water is to be treated for the removal of Manganese, iron, turbidity, suspended solids, colour, organic matter and pH The design of ...


    By WOG Technologies Inc.

  • Ozone Brings Better Bottled Water

    The proliferation of bottled beverages worldwide and an increased awareness of consumer health issues have beverage bottlers rethinking how to keep their liquids safe for consumption. One problem they face is the need to deliver a product that is free of bacteria, to provide extended shelf life and product quality. Ozone has quickly become the disinfectant of choice among water bottlers ...

  • Surface Water Treatment Industry - Case Study

    “The surface treatment industry itself exists to produce durable products and to spare the environment.“ K. Hartwall Ltd. is an enterprise in the metal industry with net sales of approximately 20 million euro. The company is well known for its innovative carriage products used in the transport and storage of goods, especially foodstuffs. The primary material in carriages is steel, ...


    By Watman Ltd.

  • Waste Water Treatment Plant City of Oakley, UT

    The City of Oakley was very happy with their new MBR facility except for the filter bag sludge dewatering system that was very labor intensive and usually didn’t produce an adequately dewatered sludge. Scott Rogers of Aqua Engineering and Bob Johnson, the Operations Mgr., chose to replace the bag system with a 0.9 meter model DDP belt press system from BDP Industries. The DDP belt press ...


    By BDP Industries

  • Multiphase pumps for energy-efficient water and wastewater treatment

    Multiphase pumps are unique products with outstanding features compared to conventional centrifugal pumps. The approach consists of using the pumps not only for transport of liquids but also for partial gas supply and as dynamic mixer for gas enrichment. Therefore this novel pump conception barely has ...

  • Pumps for energy-efficient water and wastewater treatment

    Multiphase pumps are unique products with outstanding features compared to conventional centrifugal pumps. The approach consists of using the pumps not only for transport of liquids but also for partial gas supply and as dynamic mixer for gas enrichment. Therefore this novel pump conception barely has something in common with a standard pump. Even the mode of ...

  • Fiberglass water wheels save energy and maintenance costs at water treatment plant (FRP)

    City of Kansas City, MO Over the past 20 years the Kansas City Water Plant has replaced 38 motor and chain drives in their primary and secondary mixing tanks with one 40 horse blower.  The blower supplies air to 40 fiberglass drive wheels that are directly in line with mixing paddles.  Each 13' diameter Water Wheel has eight half round buckets that when filled with air will ...


    By Monoxivent

  • Modular treatment system neutralizes process water

    A self-contained pH control and monitoring sys- tem for ready mixed operations yields clean water for recycling or permitted discharge to the environment. Fortrans' Model 5000S uses car- bon dioxide gas to neutralize high-pH process water, offering precise alkalinity monitoring and control of water in pits, settling basins and other containment areas, as it lowers total suspended solids. Designed ...


    By Fortrans, Inc.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you