water monitoring application Articles

  • A quick guide to oil analysis for engine test applications

    Reliability testing is a very important component of new engine development. Engineers need to fully understand and chart the engine lifetime performance under a variety of conditions before mass production may be considered. Many important performance data parameters are collected in real time through the many different types of sensors that are connected to the engine in the test cell and oil ...


    By Spectro Scientific

  • PeCOD® Analyzer oxygen demand analysis for source & treated drinking waters

    MANTECH’s chemical oxygen demand (COD) analyzer is breaking new ground in the science of monitoring source and treated drinking water. In addition to providing 15-minute COD results and biochemical oxygen demand (BOD) estimates, MANTECH’s PeCOD® Analyzer measures natural organic matter (NOM) in raw and treated drinking water. The NOM Analyzer™  — which is the ...


    By MANTECH

  • Continuous noise monitoring for environmental application

    The increasing awareness of the public of environmental issues such as CO2 emissions, carbon footprints and waste recycling has brought the issue of environmental noise to the fore. Many of the demands of modern society result in the creation of noise sources such as larger airports, additional power stations and higher road traffic levels. In addition to this, the expansion of towns and cities, ...


    By Cirrus Research plc

  • FTIR gas monitor for diverse applications

    QUANTITECH, a leading supplier of environmental monitoring instrumentation, has recently supplied EURO Environmental Services in Ireland with a transportable Gasmet FTIR multiparameter gas analyser which EURO Environmental's Managing Director Geoff Fitzpatrick says, “is proving invaluable in many varied applications across a broad selection of industries.” With headquarters in Drogheda in Ireland ...


    By Quantitech Ltd

  • Mining Water Quality Application

    Isaac Plains Coal Mine Isaac Plains is an open cut coal mine, in Northern Queensland, Australia. The Isaac Plains Project operates under an Environmental Authority (EA). One of the environmental monitoring requirements which must be met is monitoring water. These include potable water, mine affected water, natural creek flows, water releases, groundwater and the receiving environment. The ...


    By ANDalyze

  • Application notes: The Sievers InnovOx TOC analyzer: boiler water monitoring

    Background A boiler system is a semi-closed loop system in which water is heated and converted into steam to power a generator. The steam is then allowed to form a condensate and the process is repeated. Boiler water chemistry directly impacts boiler efficiency and fuel use. Improper water treatment allows scale formation and corrosion. Boiler scale and deposits form when impurities ...


    By GE Analytical Instruments

  • Application of Ozone in Cooling Water Systems

    The first comprehensive study - bench-top laboratory investigations, pilot scale testing, and critical monitoring and evaluation of field applications - addressing the effects of ozone as a stand-alone cooling water treatment program is presented. The study also represents the first critical comparison of ozone-treated systems with non-treated systems. Excellent corrosion control can be attained ...


    By Absolute Systems Inc.

  • Monitoring of water node in wroclaw

    Background Wroclaw's water node has complicated structure. The river Odra has 3 main riverbeds and a lot of channels which are located in the centre of town. There are almost 100 hydro buildings which control flow of the water through the city and protect it against theflood. The great flood in 1997 proved that no one has control over it. Communication systems failure caused ...


    By The OTT Hydromet Group

  • Understanding and Monitoring Hydrocarbons in Water

    Untitled Document 1. Introduction Oil contamination continues to be a very hot topic, due largely in part to recent catastrophic events with shipping ...


    By Arjay Engineering Ltd.

  • Monitoring Phenol in Water

    The Situation A plant located in the eastern United States manufactures phenolic resin for applications in plastics molding. This plant uses well water for cooling its reaction process and then discharges the water into a local creek. A leak in the reactor and associated cooling equipment would cause phenol and phenolic compounds to contaminate the cooling water. Such a leak could ...

  • Applications Bulletin

    The CleanSweepBarium Chemical Injection Discharge Water Treatment System is a patented process (U.S. Patent 7,081,204B2) owned by Environmental Treatment Technologies, Inc. (ETT). Powder River Basin application of the CleanSweepBarium process is increasing as the number of CBM operators seeking low-cost water quality compliance options increases. ETT proprietary chemical injection technology ...

  • Application of CCME Water Quality Index to Monitor Water Quality: A Case Study of the Mackenzie River Basin, Canada

    All six ecosystem initiatives evolved from many years of federal, provincial, First Nation, local government and community attention to the stresses on sensitive habitats and species, air and water quality, and the consequent threats to community livability. This paper assesses water quality aspect for the ecosystem initiatives and employs newly developed Canadian Council of Ministers of the ...


    By Springer

  • Decision making and technology selection in water (reuse) applications

    In recent years, a large number of developed countries have considered water reuse schemes as a mandated alternative water resource to tackle water scarcity. With increasing knowledge on and understanding of the merits of water reuse in developing communities, a number of planned water reuse schemes have also been established (Chen et al., 2012; Fatta-Kassinos et al., 2011a). The range of water ...


    By IWA Publishing

  • Introduction to Fluorescence for Oil in Water Monitoring

    Fluorescence can be found in many applications throughout our day-to-day routines. Commercially, one of the most obvious uses is in fluorescent lighting. For this, fluorescence is used to emit light from a tube without the use of heat, unlike standard incandescent light bulbs that require a heated element. In this example, fluorescence also contributes to energy conservation efforts. At an ...


    By Arjay Engineering Ltd.

  • Unique technology for monitoring piped water

    INTELLITECT WATER has launched a unique, highly innovative drinking water monitoring technology that will revolutionise the delivery of drinking water. The new technology monitors the quality of water in pipeline distribution networks and for the first time provides reliable data to protect the integrity of the water quality, to enhance customer satisfaction and to improve operational efficiency. ...


    By Intellitect Water Ltd

  • Potential applications of next generation DNA sequencing of 16S rRNA gene amplicons in microbial water quality monitoring

    The applicability of next generation DNA sequencing (NGS) methods for water quality assessment has so far not been broadly investigated. This study set out to evaluate the potential of an NGS-based approach in a complex catchment with importance for drinking water abstraction. In this multi-compartment investigation, total bacterial communities in water, faeces, soil, and sediment samples were ...


    By IWA Publishing

  • Application note: The Sievers InnovOx TOC Analyzer: Wastewater Monitoring

    Overview Wastewater is used water. It can include substances such as human waste, food scraps, oils, soaps, and chemicals. Manufacturing industries as well as wastewater municipalities must comply with the United States Environmental Protection Agency’s (USEPA) Clean Water Act (CWA) regulations. In order to discharge treated wastewater and be compliant with the CWA, a ...


    By GE Analytical Instruments

  • Application of Membrane Technology for the Recovery and Reuse of Water

    Abstract As water and sewer costs are expected to increase over the next decade, membrane technology will continue to be a viable and economical option in the recovery and reuse of water. This paper describes the mechanism of membrane effected separation (specifically reverse osmosis, ultrafiltration and microfiltration), membranes commercially available, membrane element configurations, and how ...


  • Water Distribution System Security Monitoring

    A water security instrument essentially needs to be able to detect potential contaminants in drinking water. Since a significant number of potential chemical contaminants are organic in nature, a water security monitoring instrument that can detect organic matter in water is perfect for this application. Real Tech has developed an instrument specifically designed for water security ...


    By Real Tech Inc.

  • Application of 3D-fluorescence/PARAFAC to monitor the performance of managed aquifer recharge facilities

    3D-fluorescence spectroscopy was used as a monitoring tool to describe the fate and transport of dissolved organic matter (DOM) during groundwater recharge using recycled water, imported water, and stormwater at a managed aquifer recharge site in California. The study was supplemented by analysis of conservative wastewater-derived trace organic chemicals using liquid chromatography coupled ...


    By IWA Publishing

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you