water monitoring tool Articles

  • Monitoring Tools for Watershed Assessments

     Weston Solutions, Inc. (WESTON®) has designed and implemented a watershed-based monitoring program with the San Diego County Copermittees. The monitoring program includes three elements: Mass Loading Station (MLS) Monitoring, Stream Bioassessment Monitoring, and Ambient Bay and Lagoon Monitoring. The core program includes the collection and analysis of stormwater runoff during three storm ...


    By Weston Solutions, Inc

  • Pioneering Primer from Plastics Pipe Institute

    With administrative offices located in Dallas, Texas, The Plastics Pipe Institute Inc. (PPI) is the major trade association representing all segments of the plastics piping industry. PPI members share a common interest in broadening awareness and creating opportunities that expand market share and extend the use of plastics pipe in all its many applications. As an association, PPI focuses ...


    By TRIC Tools Inc.

  • Topological clustering as a tool for planning water quality monitoring in water distribution networks

    Topological clustering was explored as a tool for water supply utilities in preparation of monitoring and contamination contingency plans. A complex water distribution network model of Copenhagen, Denmark, was simplified by topological clustering into recognizable water movement patterns to: (1) identify steady clusters for a part of the network where an actual contamination has occurred; (2) ...


    By IWA Publishing

  • Colour Measurement as a Tool for Monitoring Oil Quality

    This paper takes a look at the many factors known to have a direct or indirect impact on the quality of oil and the diverse range of different measurement devices have been developed for this purpose, such as relative humidity and absolute water content indicators, particle calculators, dielectric sensors, oxidisation indicators (TAN value), viscosity meters and colour analysers. It explains ...


    By Kytola Instruments Oy

  • A novel acoustic imaging tool for monitoring the state of rapid sand filters

    A new technology based on acoustic waves is developed to monitor the state of sand filters used in drinking water treatment. Changes in the sand filter, due to the removal of suspended particles from the water and their accumulation in the pores, result in an increase of the bulk density and acoustic speed of the granular material. Consequently, the reflected acoustic response changes as the ...


    By IWA Publishing

  • Water Quality Monitoring and Assessment

    The book attempts to covers the main fields of water quality issues presenting case studies in various countries concerning the physicochemical characteristics of surface and groundwaters and possible pollution sources as well as methods and tools for the evaluation of water quality status. This book is divided into two sections: Statistical Analysis of Water Quality Data;Water Quality Monitoring ...


    By IWA Publishing

  • Instrumentation, methods & analysis tools for comprehensive condenser testing, monitoring & troubleshooting

    Abstract Proper monitoring philosophy in combination with available, accurate and reliable instrumentation for comprehensive condenser performance testing, monitoring and troubleshooting is presented. Practical engineering guidance resulting from the use of advanced instrumentation with proven utility has contributed to the identification of new beneficial performance indicators. ...


    By Intek, Inc.

  • Micropollutants in European rivers: A mode of action survey to support the development of effect‐based tools for water monitoring

    Environmental quality monitoring of water resources is challenged with providing the basis for safeguarding the environment against adverse biological effects from exposure to anthropogenic chemicals originating from diffuse and point sources. Although current regulatory efforts focus on monitoring and assessing a few legacy chemicals, many more anthropogenic chemicals are and will become ...


    By John Wiley & Sons, Ltd.

  • Field monitoring and numerical modeling as tools in effect-evaluation of waste heat and chlorination byproducts via cooling water discharges

    Power plants and other industrial facilities apply cooling water to remove waste heat from their condensers and heat exchangers. These industries are obliged to predict the thermal and environmental effects on the water bodies on which the discharge takes place in order minimize negative impact on aquatic organisms. The general approach of EC Water Framework Directive acquires the evaluation of ...


    By Sweco Nederland BV

  • Tools for monitoring distribution system water quality: a study using four parallel pilot systems

    Monitoring and understanding water quality changes within the distribution system is essential to enable effective management to provide good quality water at the customer tap. A recent 2-year study utilised four parallel pilot distribution systems (PDS) and a range of simple tools to assess the impact improving treatment had on the water quality within the distribution system. Particle ...


    By IWA Publishing

  • Water quality management of aquifer recharge using advanced tools

    Managed aquifer recharge (MAR) with recycled water or other alternative resources is one of the most rapidly growing techniques that is viewed as a necessity in water-short areas. In order to better control health and environmental effects of MAR, this paper presents two case studies demonstrating how to improve water quality, enable reliable tracing of injected water and better control and ...


    By IWA Publishing

  • On-line monitoring of enzymatic activities in water and water resources

    On-site detection of enzymatic activities has been suggested as a rapid surrogate for microbiological pollution monitoring of water resources (e.g. using glucuronidases, galactosidases, esterases). Due to the possible short measuring intervals enzymatic methods have high potential as near-real time water quality monitoring tools. This presentation describes the successful realization and ...

  • Tools for the implementation of integrated water resources management (IWRM) in the Caribbean

    While many countries and regional authorities in the Caribbean have embraced the concept of integrated water resources management (IWRM) and recognized its guiding principles as beneficial, few have possessed the capacity to implement it since its enunciation in the Dublin Principles of 1992. The Caribbean Water Initiative (CARIWIN) endeavoured over a 6-year period, 2006–2012, to build ...


    By IWA Publishing

  • TOC Analysis: The Best Tool in a Drinking Water Facility`s Toolbox

    Total organic carbon (TOC) has become an important water quality analysis tool for drinking water plants in recent years due to its link to disinfection byproducts (DBPs). TOC alone is not harmful, but upon its reaction with a disinfectant can produce harmful byproducts. However, TOC’s relevance in drinking water ...


    By GE Analytical Instruments

  • Hydraulic modeling and water quality monitoring

    Untitled Document The 2004 IMTech conference held in Baltimore, Maryland, April 18-20, attracted hundreds of water professionals interested in the application of IT solutions in water supply and distribution ...


    By Innovyze

  • Introduction to Fluorescence for Oil in Water Monitoring

    Fluorescence can be found in many applications throughout our day-to-day routines. Commercially, one of the most obvious uses is in fluorescent lighting. For this, fluorescence is used to emit light from a tube without the use of heat, unlike standard incandescent light bulbs that require a heated element. In this example, fluorescence also contributes to energy conservation efforts. At an ...


    By Arjay Engineering Ltd.

  • Toxicity Identification Evaluation (TIE) as a Tool for Water Quality Management

    Whole effluent toxicity (WET) testing has evolved into a critical element of many National Pollutant Discharge Elimination System (NPDES) permits issued to both industrial and municipal dischargers. Over 6,500 dischargers to both fresh and salt waters are required to conduct toxicity tests to determine if their effluent might be potentially toxic to organisms in the receiving system. While ...


    By AECOM

  • Unique technology for monitoring piped water

    INTELLITECT WATER has launched a unique, highly innovative drinking water monitoring technology that will revolutionise the delivery of drinking water. The new technology monitors the quality of water in pipeline distribution networks and for the first time provides reliable data to protect the integrity of the water quality, to enhance customer satisfaction and to improve operational efficiency. ...


    By Intellitect Water Ltd

  • Ground Water Monitoring of the City of Hamburg, Germany

    Reference Project: Ground Water Monitoring of the City of Hamburg, Germany Hamburg is the second-largest city in Germany with approx. 4.3 million inhabitants. The Hamburg Environmental Authority manages a constantly growing data base containing data from more than 10.000 ground and surface water monitoring points. With the help of this data base the  authority is able to provide information ...

  • Drinking water quality monitoring using trend analysis

    One of the common quality parameters for drinking water is residual aluminium. High doses of residual aluminium in drinking water or water used in the food industry have been proved to be at least a minor health risk or even to increase the risk of more serious health effects, and cause economic losses to the water treatment plant. In this study, the trend index is developed from scaled ...


    By IWA Publishing

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you