water quality sensor Articles

  • ´More Stations. More Data. Better Forecasts.´ – the NYS Mesonet

    “More Stations. More Data. Better Forecasts.” – that’s the slogan of New York State Mesonet. The weather observation network consists of a total of 125 weather stations all over the state of New York and Lufft was selected as one of the vendors to support them in capturing the data. All 125 of the weathers stations have the standard instrumentation suite. Of those 125, 17 ...

  • Raw material cycle: from chip to briquette to product - Case Study

    Thanks to their briquetting system from RUF Frischhut can redeploy production scrap and melt it again Ludwig Frischhut GmbH and Co. KG have closed the circle on their raw material cycle by utilising a briquetting press from RUF: cast chips produced during the machining of parts for water supply and sewage disposal are pressed to solid briquettes and then melted in the in-house foundry and ...

  • Mining Water Quality Application

    Isaac Plains Coal Mine Isaac Plains is an open cut coal mine, in Northern Queensland, Australia. The Isaac Plains Project operates under an Environmental Authority (EA). One of the environmental monitoring requirements which must be met is monitoring water. These include potable water, mine affected water, natural creek flows, water releases, groundwater and the receiving environment. The ...


    By ANDalyze

  • Water quality in the Arosa Bay

    Background One of the great impediments to further development of shellfish aquaculture in the north-west region of Spain isa perception that industry expansion and tourism could have negative environmental effects on the coastal waters. Especially the bay around Villagarcia de Arosa is very famous because of its excellent areas for shellfish farming. The government of Spain is ...

  • Nanosensors applied to water quality: developing a low-cost pH sensor for natural water, and application of other techniques

    A low-cost optical sensor built-in strip has been developed from a composite obtained with application of in-situ chemical polymerisation, using polyaniline in the emeraldine oxidation state, doped with HCl onto poly(ethylene terephthalate) (PET) film, used to measured the pH of water. The absorption of UV-Vis spectra was used to evaluate the optical response to pH change of natural water. The ...


    By Inderscience Publishers

  • Multi-objective optimization for conjunctive placement of hydraulic and water quality sensors in water distribution systems

    Near real-time continuous monitoring systems have been proposed as a promising approach for enhancing drinking water utilities detect and respond efficiently to threats on water distribution systems. Water quality sensors are aimed at revealing contamination intrusions, while hydraulic pressure and flow sensors are utilized for estimating the hydraulic system state. To date optimization models ...


    By IWA Publishing

  • Water quality monitoring with hydrolab MS5

    Background The Škocjan caves are a unique natural phenomenon located in south western Slovenia and are preserved as the Škocjan Caves Park under UNESCO protection. One of the most famous network of underground caves in the world, they were formed by the flow of the Reka River as it bored tunnels through the region’s limestone geology. The river first disappears underground just outside the ...

  • Advanced Water Quality Techniques Course

    Abstract:The development of a strategic water quality monitoring program is based on prioritizing risks to public safety and economic reality. The development of global standardized methods and protocols for automated water quality monitoring would facilitate international communication of water quality information and comparison of standardized methods and protocols. The three primary methods ...


  • Water Quality Monitoring for the “Big Four Parameters”

    Many different parameters can be measured in natural and artificial waters with sensors or via lab analysis. Each parameter effects water quality and the organisms that depend on the water for survival. Different states, monitoring agencies, and companies also place an emphasis on different water quality parameters to be monitored, depending on local conditions and mandates. For most water ...

  • Monitoring Water Quality Runoff From a Coalmine

    Intelligent Monitoring Solutions from dataTaker CAS DataLoggers provided the intelligent datalogging solution for an open-cut coalmine managing a high salinity water runoff into local retaining dams. The water from these dams could only be released into the local river system when it was of sufficient quality to have no effect on the irrigation of the surrounding farming district. ...


    By CAS DATALOGGERS

  • Water Quality Monitoring and Testing Using an Environmental Logger

    Intelligent dataTaker System from CAS DataLoggers Water disruptions typically occur after a large amount of water has rapidly collected in a catchment area. As a result this water is subject to continual monitoring and testing for a variety of chemical and biological agents as well as clarity, rate of movement, and water levels for environmental management. Turbidity, conductivity, ...


    By CAS DATALOGGERS

  • Water quality is key to the success of Cardiff Bay

    Water quality has been a central theme in a redevelopment project that began with the creation of the Cardiff Bay Development Corporation in April 1987. This article will examine the role that water quality has played in the remarkable transformation that has taken place in Cardiff and explain how monitoring technology has developed to the stage whereby any person, anywhere in the world, can view ...

  • Dynamic soft sensors for detecting factors affecting turbidity in drinking water

    Effective monitoring of water quality is critical for water safety. In particular, online monitoring based on modeling is useful in several applications such as process assessment, hazardous event detection or common fault diagnostics in the water processes. Soft sensors have lately established themselves as a good alternative for different tasks of process control such as the acquisition of ...


    By IWA Publishing

  • Why is Calibration of Water Quality Testing Equipment so Important?

    The calibration of water quality testing equipment is as important as the tuning of a musical instrument. When people find out I’m a chemist, the first thing they ask me is, “Are you Walter White?” (This shows you the kind of people I typically run into). The second thing they ask me is, “Why is calibration so important?” Simply stated, calibration is how we adjust ...


    By In-Situ, Inc.

  • How to Find the Best Soil Water Content Sensor for Your Application

    Because there are many different types of soil water content sensors available, choosing the best one for your application may seem difficult or even confusing. To help you make your selection, it’s important to understand what soil water content sensors actually measure, what makes a good soil water content sensor, and how to make sense of the manufacturer specifications. In this article, ...


    By Campbell Scientific, Inc.

  • Calibration and characterization of an improved low-cost water content sensor

    Inexpensive, accurate, and reliable soil moisture measurements are necessary in countless applications from research to hydroponics. Many have dreamed of these types of sensors being so inexpensive that they could be spread over a wide area to monitor water status at numerous locationsin a watershed, greenhouse, or golf course to name a few. However, measurements of this sort are only as valuable ...


    By Decagon Devices, Inc.

  • Neuthox improves the water quality by removing unwanted bacteria - Case Study

    NEUTHOX removes biofilm in cooling tower and leaves the water system completely free of unwanted bacteria Using an electrolysis process of saltwater the ECA generator produces the liquid NEUTHOX, which contains hypochlorous acid, and is highly efficient in eliminating bacteria. A biofilm consists of living and dead organic and inorganic material collected on a surface, which in ...

  • Colour Measurement as a Tool for Monitoring Oil Quality

    This paper takes a look at the many factors known to have a direct or indirect impact on the quality of oil and the diverse range of different measurement devices have been developed for this purpose, such as relative humidity and absolute water content indicators, particle calculators, dielectric sensors, oxidisation indicators (TAN value), viscosity meters and colour analysers. It explains ...


    By Kytola Instruments Oy

  • In-situ quality monitoring station in Lower Saxony

    Background 'Duemmer' is a shallow lake in the south-west of Lower Saxony; through the lake flows the river 'Hunte'. The catchment area spans 426 km2. With a surface of 12.4 km2 and an average depth of 1.1 m there is a water volume of approx. 14 million m3. Large parts of the lakeside are a nature reserve and the lake is a popular local recreation area. The lake suffers from strong nutrient ...

  • Upgrading from Pellistor Gas Sensors to Infrared Technology

    In this article Andy Avenell, Crowcon’s Fixed Systems Product Manager, considers the shift towards infrared (IR) gas sensor technology in the oil and gas industry. Abstract Flammable gases and vapours can present considerable dangers in many industrial applications, none more so than the processes involved in extracting, transporting and processing oil and gas. Fast and reliable ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you