water storage system manufacturer Articles

  • Hazardous waste and not, Baioni-Dicatech system

    The identification, characterization and restoration of contaminated areas now represent a big environmental issue, both at European and national level. In the major industrialized countries the issue of contaminated land has come out in all its gravity in the late seventies when, against a widespread awakening of environmental consciousness, important pollutions events emerged. Consequently, in ...


    By Baioni Crushing Plants Spa

  • Water recovery system reduces soft drink manufacturers water waste by 35%

    The filtration and water treatment specialist Puresep provide leading soft drinks manufacturer with a state of the art system to reduce their water usage Puresep were contacted to look at ways the soft drinks manufacturer could reduce the amount of rinse water sent to drain – in order to help them achieve their water reduction targets Following an onsite review of the current rinse ...


    By Water Active Ltd

  • Rainwater Harvesting – Water Storage Tanks Supplied to Quarry

    Enduramaxx Water Tanks recently manufactured and delivered an order of 10 No. 20800 Litre Water Storage Tanks for water reuse in a quarry. Enduramaxx won the order through working with the client and the system installer. This combination of water tanks were fitted with interlinking pipe work as Enduramaxx customised the fittings to ...


    By ENDURAMAXX

  • Dynatec Provides Complete System for Aerospace Manufacturer

    Dynatec is engaged to provide a comprehensive water and wastewater treatment solution for an aerospace manufacturing process. Background Goodrich Aerospace was relocating a manufacturing facility that performs surface treatment for aircraft metal parts. The facility produces about 150,000 gallons per day of wastewater that contains hexavalent chrome, titanium, and other ...


    By Dynatec Systems Inc.

  • Membrane Bioreactor for Automobile Manufacturer

    Dynatec provided a system to treat wastewater from Ford's automotive assembly plant. The Problem The existing batch chemical treatment system for oil and metals removal was unable to meet the new standards for discharge to local POTW. The new requirements called for lower BOD and total Nitrogen and there was no way to make the existing system able to meet the standards. ...


    By Dynatec Systems Inc.

  • Saudi Arabia’s National Water Company Increases Water Storage

    In 2012 the National Water Company (NWC) of Saudi Arabia undertook the enormous project of developing 43 wells and 46 water purification stations in 27 separate locations to provide sustainable potable water systems near Riyadh. To accomplish this task in a short six-month timeframe, contractors around the world were brought in to provide the necessary pieces of infrastructure required to build ...


    By CST Industries Inc

  • Water contamination problems solved at automobile air bag manufacturing plant

    The Facility Based in a Rocky Mountain state, this facility produces the sodium azide pellets contained inside the air bags for automobiles produced throughout the world. The Problem During the manufacturing of the air bag propellent, frequent equipment washdowns produce large volumes of wastewater that contain sodium azide and metal sulfide salts. Sodium ...

  • Severe Drought and Collapsible Water Storage Tanks and Pillow Bladders

    The U.S. Department of Agriculture's Drought Monitor has recently published information indicating that up to 95 percent of Texas is experiencing either "severe" or "exceptional" drought conditions this year. According to the National Weather Service, Texas experienced the hottest period (June through August 2011) on record in the U.S. In addition, the Lower Colorado River Authority (LCRA) ...


    By Interstate Products Inc

  • What Hydrogen Storage is Best for Me?

    There are a number of different Hydrogen storage options available. The one which is best for you depends on what is most important for your application: Compressed Economical Readily Available Metal Hydride (MH) High volumetric density (kg H2/ft3) Heavy May need more ...


    By Fuel Cells Etc

  • Controlling Storage Level of Oil Tanks case study

    SmartScan25 provides a reliable and strong solution for level measurement of stored oil in Taiwan's leading fibers manufacturer. Tuntex Distinct Corp. located in Tainan, is Taiwan's leading manufacturer of fiber and spinning for the textile industry. The company's plant is known by its state-of-the-art technology that guarantees top quality fibers and filaments for textiles and garments around ...

  • Engine manufacturer saves $200,000 per year

    The Problem: A “Big 3” engine manufacturer was dumping their 140,000 gallon central coolant system over shutdown every year. As oil contamination, metal fines, and aluminum soaps built up in the fluid, plant engineers noticed that surface finish decreased and tooling usage increased. As a remedy, the system was dumped, cleaned, and recharged with fresh coolant. With a ...

  • Pesticides Manufacturing Industry - Pollution Prevention Guidelines

    Introduction Pollution Prevention Guidelines to provide technical advice and guidance to staff and consultants involved in pollution-related projects. The guidelines represent state-of-the-art thinking on how to reduce pollution emissions from the production process. In many cases, the guidelines provide numerical targets for reducing pollution, as well as maximum ...


    By The World Bank

  • MBBR Helps Seafood manufacturer meet regulatory requirements

    Abstract Seafood processor in Manta Ecuador has a high strength wastewater with TSS as high as 20,000 mg/l, FOG 700 mg/l, COD of 13,000 mg/l and BOD of 6,000 mg/l. Wastewater is discharged into Pacific Ocean across the street from the factory. Current treatment plant produces effluent with TSS of 150 mg/l, FOG of 80 mg/l, COD of 800 mg/l and BOD of 400 mg/l on average. New laws require that ...

  • Cleaner Production in Confectionery Manufacturing: Cadbury Schweppes

    Cadbury Schweppes Pty Ltd has implemented a large number of cleaner production initiatives at it's Ringwood Confectionery plant in Victoria. The annual savings from reduced raw material and waste disposal costs amount to $780,000. Background Cadbury Schweppes Pty Ltd's plant in Ringwood, Victoria produces a range of confectionery products, including Easter eggs, chocolate bars ...


  • Hydrogen Storage - Solution for an Intermittent Energy Source

    Storing solar energy through hydrogen versus traditional storage solutions Today, energy is either transmitted directly to the consumer through the grid or stored as backup power for future use via batteries, pumping water, etc. When it comes to solar and wind energy, it becomes extraordinarily difficult to take full advantage of the renewable sources using traditional methods of power ...


    By Verde LLC

  • Hazardous Location LEDs in Chemical Manufacturing Facilities

    Employees inside chemical manufacturing plants are exposed to some of the most unforgiving work conditions in the industrial sector. This is because in such environments, workers are exposed to extreme temperatures, dust, volatile chemicals and invisible, explosive gases. Common protection methods against explosive risks include containment, segregation and prevention. Out of all the ...


    By Larson Electronics LLC

  • CDM Smith 50m3 DIY Biogas Storage

    When CDM Smith, the American based global contractor specialising in water, environment and energy contacted us regarding biogas storage we knew it would be an interesting project! With new U.S. regulations requiring federal facilities to use renewable energy sources to meet 7% of energy needs by 2013 and 25% by 2025, CDM Smith are at the forefront of trialling renewable energy systems. The ...


    By Base Structures Ltd

  • Coke Manufacturing Industry - Pollution Prevention Guidelines

    Introduction Pollution Prevention Guidelines to provide technical advice and guidance to staff and consultants involved in pollution-related projects. The guidelines represent state-of-the-art thinking on how to reduce pollution emissions from the production process. In many cases, the guidelines provide numerical targets for reducing pollution, as well as maximum ...


    By The World Bank

  • Pharmaceutical / Personal care product manufacturer promotes quality standards

    Challenge Pharmaceuticol manufacturers demand high qualify water with the fewest dissolved solids possible, to promote product consistency. A Canadian manufacturer of pharmaceutical/personal core products was looking to maintain water quality specifications to promote product consistency and improve product shelf life. First the source water for the manufacturing plont comes from ...


    By Culligan Matrix Solutions

  • Western gateway storage company first to save with Evapcold - Case Study

    The best solution for freezer and cooler applications Western Gateway Project Specifications Equipment: (2) LCR-060P-L20-2H-W Evapcold Units (2) ATWB 9-7K12 Fluid Coolers Capacity: 70 TR per LCR Unit x (2) = 140 TR max capacity Charge: 290 lbs. NH3 per LCR Unit x (2) = 580 lbs. NH3 vs. 3500 lbs. NH3 ...


    By Evapco Inc.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you