water test Articles

  • Saline Pond Multi-Layer Liner System - Case Study

    Gas operation benefits from the conversion of a single-liner system to a double-liner with leak detection monitoring Extensive gas operations near the North Saskatchewan River in Fort Saskatchewan, Alberta, are understandably closely regulated. To help the client remain well above compliance requirements and expand their leak detection capabilities, Nilex implemented the ...


    By Nilex

  • How to make top-down and bottom-up sustainability converge

    Fits and starts are all too common in the sustainability world. One year you have budget for initiatives; the next you don’t. Management hails cost savings on individual projects, but they miss the big picture and fail to link progress across departmental boundaries. Bottom-up progress and top-down directives pass each other like proverbial ships in the night. But it doesn’t have to ...


    By CH2M Hill Companies, Ltd.

  • Stop It Pipe Repair System assists in decommissioning project - Case Study

    Since 1986, InduMar Products Inc. has provided a unique solution with its STOP IT Pipe Repair System. In refineries and chemical plants, where many miles of piping carry products that are often highly flammable, toxic or corrosive, the STOP IT provides a method to restore product and profit flow in minutes instead of the many hours required to cut out a pipe section, fabricate and install a new ...


    By InduMar Products, Inc.

  • Testing the Waters

    Last summer’s wave of tropical storms left the East Coast scrambling to ensure drinking water quality. Water Quality Products editorial intern Raissa Rocha spoke with Marc Hamel of testing equipment manufacturer Horizon Technology Inc. to discuss the impact weather events may have on water quality. Raissa Rocha: What is your experience with ...


    By Horizon Technology, Inc.

  • Oil in frac water testing

    The amount of water used in and produced by hydraulic fracturing of shale gas wells is in the millions of gallons per well. Whether the water is going to be taken off site for disposal or reused for re-injection, the flowback or produced water needs pretreatment to remove any residual oil from the wa-ter. Waiting for remote laboratory results can take several days to a week. The InfraCal TOG/TPH ...


    By Spectro Scientific

  • Water testing 101: TDS

    According to Wikipedia, total dissolved solids (TDS) is defined as “the combined content of all inorganic and organic substances contained in a liquid that are present in a molecular, ionized or microgranular suspended form.” The article goes on to state that “total dissolved solids are differentiated from total suspended solids (TSS) in that the latter cannot pass through a ...


    By HM Digital, Inc.

  • Test & treat - treating hydrostatic test water

    A pipeline company in Iowa conducted a hydrostatic test of its pipeline, producing 39,000 barrels of fluid for treatment. The hydrostatic test water was to be discharged in accordance with a National Pollutant Discharge Elimination System (NPDES) permit. The permit required that discharge of the treated test water could not exceed a period of 14 days from the date the test was conducted. Fluid ...


    By CETCO Energy Services

  • Innovations in Bench Testing of Waste waters

    Wastewater management in developing countries throughout the world is in a state of crisis. It is estimated that 2.6 billion people worldwide live without adequate sanitation. Resources are scarce, previous management systems have failed, and traditional techniques and solutions are not immediate enough, too expensive, or simply inefficient. Discussion with regards to OI Analytics Instrumentation ...


  • New field test for Iron in Water

    Iron is a ubiquitous element that is often found in well water, to which itcan give an unpleasant taste. It is important to understand the basic chemistry of iron, how it gets in water, and above all how to test for it accurately and easily. ...

  • Testing for Nitrates in Water, what are the Options?

    Nitrate is a naturally occurring substance in the environment and is commonly found in most water sources, it is usually only a cause for concern in areas where water supplies can be affected by farm runs offs and agriculture, its use as a fertiliser can cause increased levels in water supplies The ...


    By Camlab Limited

  • Apartment Water Test - Case Study

    We had successfully mitigated this exact situation at another property (Family Tree Apartments] which also had extensive pin hole leaks and water heater failures. Based upon this prior exceptional success, it was clear that the H20 Solutions USA, LLC team was again needed to engineer a solution. H20 Solutions USA, LLC is analysis revealed that the water supply in Greenfield, CAis very hard at 18 ...


    By HydroFLOW USA

  • Materials Testing

    Dynaflow, Inc. is pleased to announce its specialized materials testing capabilities for material erosion due to cavitation and liquid impact, and for properties of materials undergoing rapid loading. Dynaflow, Inc. conducts standard (ASTM G-32, G-73, G-134) and customized erosion tests for cavitation and liquid impact erosion using ultrasonic, water jet, and whirling disk devices. This includes ...


    By Dynaflow, Inc.

  • Detection of PCB in water using the ensys test kit

    MATRIX: Water ANALYTE: PCB LIMIT OF DETECTION: 1260: 50 ppb 1254: 50 ppb 1248: 100 ppb 1242: 200 ppb 1232: 400 ppb 1016: 400 ppb MATERIALS: Ensys PCB 12 Test Kit, item # 7020301. Ensys PCB Soil Extraction Kit #7020300EA. Clean tap or deionized water. Equipment: Ensys Field System ...


  • Analysis of PCB in water using the envirogard test system

    MATRIX: Water ANALYTE: PCB LIMIT OF DETECTION: Aroclor 1248: 1 ppm Aroclor 1260: 2 ppm Aroclor 1242: 2 ppm Aroclor 1254: 1.1 ppm BACKGROUND: This application describes a field screening method for determining PCB concentrations in water. A chemical reaction is induced that causes a color change ...


  • Heavy Metals Water Testing Powered by DNA

    Water pollution is a worldwide problem affecting developing and developed countries alike. Heavy metal contaminants are one prevalent type of water pollutant. They are persistent in the environment once d is charged and removal from source waters is necessary to ensure a clean drinking water supply. The problem of heavy metal pollution arises from several sources. Heavy metals such as uranium can ...


    By ANDalyze

  • The Importance of Water Testing After Natural Disasters

    In the aftermath of a natural disaster, particularly earthquakes, infrastructure could be damaged and a safe source of drinking water is often not available. This may be due to damaged pipes or water supplies becoming contaminated. Our colleagues at Oxfamstate; “In the initial phases of an emergency it should be assumed that all water sources are contaminated ...


    By DelAgua Group

  • Water Quality Monitoring and Testing Using an Environmental Logger

    Intelligent dataTaker System from CAS DataLoggers Water disruptions typically occur after a large amount of water has rapidly collected in a catchment area. As a result this water is subject to continual monitoring and testing for a variety of chemical and biological agents as well as clarity, rate of movement, and water levels for environmental management. Turbidity, conductivity, ...


    By CAS DATALOGGERS

  • Factors Affecting Oil in Water Testing Methods

    Various factors need to be considered when comparing methods to measure oil and grease in water.  Whether you are trying to meet effluent limits for an NPDES (National Pollutant Discharge Elimination System) permit, comply with oil and grease limits for the Clean Water Act (CWA), or an industry satisfying a POTW’s (Publically Owned Treatment Works) discharge permit, it is ...


    By Spectro Scientific

  • TOC System Suitability Test for Sterile Water

    The United States Pharmacopeia (USP) specifies that total organic carbon (TOC) content be used for management of organic impurity values permitted in bulk purified water, water for injection, in addition to sterile purified water and sterile water for injection. According to USP, TOC analyzers to be used for sterile water must satisfy the TOC system suitability test using test water ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you