water testing consumable Articles

  • Building Energy Modeling 101: HVAC Design and Operation Use Case

    A great deal of energy use in buildings goes toward heating, ventilation, and air-conditioning (HVAC). In 2015, HVAC consumed 15.5 quads. The first step in reducing HVAC energy use is reducing heating and cooling load—i.e., the amount of heat that needs to be added to or removed from a building—typically by reducing heat from equipment and lighting; minimizing unnecessary ...


    By US Department of Energy

  • What is Chemical Oxygen Demand (COD)?

    Chemical Oxygen Demand (COD) analysis is a measurement of the oxygen-depletion capacity of a water sample contaminated with organic waste matter. Specifically, it measures the equivalent amount of oxygen required to chemically oxidize organic compounds in water. Why Measure COD? COD is used as a general indicator of water quality and is an integral part of all water quality ...


    By MANTECH

  • When Consumables Kits are Greater Than the Sum of their Parts

    ProteinWorks and GlycoWorks kits address more than sample prep challenges One of the most challenging parts of an LC-MS workflow happens before analytical chemists even turn to their instrument: Sample preparation. Get it right, and the analytical run performs as expected. Get it wrong, and the assay has any number of problems, from poor sensitivity to poor reproducibility. The ...


    By Waters Corporation

  • Testing for Nitrates in Water, what are the Options?

    Nitrate is a naturally occurring substance in the environment and is commonly found in most water sources, it is usually only a cause for concern in areas where water supplies can be affected by farm runs offs and agriculture, its use as a fertiliser can cause increased levels in water supplies The ...


    By Camlab Limited

  • Evidence of regional differences in chlorine perception by consumers: sensitivity differences or habituation?

    Chlorinous flavors are a leading cause of customers' dissatisfaction with drinking water. Potential differences in chlorine perception were investigated by conducting sensory testing experiments in France and Spain to assess consumers' sensory sensitivity (chlorine flavor detection threshold and supra-threshold intensity) as well as their liking of and acceptability for chlorinated solutions. ...


    By IWA Publishing

  • Producing green energy from post-consumer solid food wastes at a wastewater treatment plant using an innovative new process

    ABSTRACT More than 246 million tons of municipal solid waste (MSW) was generated in the United States in 2005, and this tonnage is expected to increase every year. The third highest component of MSW is food waste, but less than 3% of food waste is recycled. In an effort to meet the U.S. Environmental Protection Agency’s national 35% MSW recycling goal, and many states’ and local governments’ ...

  • Hwy 60 test, Lodi, Wisconsin

    It’s hard to find Civil & Environmental Engineering Professors Craig Benson and Tuncer Edil behind their desks. You have a better chance of locating them on a construction site, actively participating in the task at hand. They prefer to teach through hands-on lessons, like those found in their groundbreaking soil stabilization research efforts. Benson and Edil are currently involved in two major ...


    By Presto Geosystems

  • International Journal of Soil, Sediment and Water features `new field test for lead in soil` article

    ABSTRACT Field tests for the detection of lead in soil are not frequently accepted, since the tests are rather cumbersome or not reliable for screening determinations. Recently, we developed the LEADQuick field test kit for the detection of lead in water with 3 #22;g/L sensitivity. This test is further modified to detect lead in soil with a sensitivity 0.03 #22;g. We developed an extraction ...

  • Simplifying the Screening Workflow for Extractables Testing: Infographic

    The safety of pharmaceuticals, cosmetics, and foodstuffs may be compromised by chemical compounds in the various types of packaging and food contact materials (FCMs) that are in direct contact with the consumer product. Due to continuously increasing global regulations, the characterization of extractables and ...


    By Climate Institute

  • Modification of jar testing protocol combined with mEnCo model predicted dose to predict dissolved organic matter removal for surface water

    In recent climatic events in Australia, the need for frequent jar testing to determine optimum coagulant and flocculant aid doses became apparent in order to determine optimum treatment efficiencies. The generally applied jar test procedure can be time consuming and this prompted investigations for capacity to test waters more rapidly, for a range of treatment conditions and raw water qualities. ...


    By IWA Publishing

  • Parameter Sensitivity of Hydraulic Conductivity Testing Procedure

    A methodology is presented that allows researchers to identify which parameters have the largest effect on key parameter(s), and thereby a priori direct investigations to concentrate on the most important area(s) of concern. Laboratory testing is often used in research to establish the effect of one or more parameters on one or more other parameters of concern. Because laboratory testing often is ...


    By ASTM International

  • US Diagnostics Testing Market Review and Outlook Report

    ReportsnReports.com adds report AUS Diagnostics Market Review and Outlook to its store. This new report provides an overview of the US diagnostic testing market, including sales and market shares of leading reagent and instrument suppliers, as well as test volume and sales forecasts for the following market segments: Blood Banking Cancer ...


  • Automated Hydrant Testing and Fire Flow Analysis

    Untitled Document ...


    By Innovyze

  • Research on Tuberculosis Testing Market Provides 5 Year Test Volume & Sales Forecast by Countries

    ReportsnReports.com adds report Tuberculosis Testing Market 2014 : US, Europe (France, Germany, Italy, Spain, UK), Japan--Emerging Opportunities, Supplier Shares, Country Forecasts, Innovative Technologies, Competitive Landscape to its store. The report presents a detailed analysis of the Tuberculosis diagnostics market in the US, Europe (France, Germany, Italy, Spain, UK) and Japan. Current ...


  • Chemical pollutants in water emerge

    Recent advances in contaminant identification methodologies, sampling instrumentation, and analytical chemistry have caused an explosion of knowledge about the presence of previously undetected organic micropollutants. While it doesn"t follow that the mere presence of chemical contaminants results in harm, public health experts, regulators, and others aren"t sitting idly by. Given the necessity ...


    By Bergeson & Campbell, P.C.

  • Reduction of Waste from Synthetic Rubber Testing and Unreacted Styrene: Kemcor Australia

     Kemcor Australia has used cleaner production processes to reduce waste from synthetic rubber testing and unreacted styrene in small batch production, with significant cost savings. Background Kemcor Australia is a leader in the production of olefins, poly-olefins and synthetic rubber, and is part of the Altona (Victoria) chemical complex, the largest centre for primary ...


  • Response of corn and cotton to starter phosphorus on soils testing very high in phosphorus

    Phosphorus from agricultural lands poses a problem in water resources. In 2003, more than 48% of soil samples submitted to the North Carolina Department of Agriculture and Consumer Services (NCDA&CS) soil testing laboratory tested very high in soil P (>120 mg dm–3 P). As soil test P increases, off-site P loss increases, through erosion, soluble P runoff, or leaching. On soils testing above high ...

  • Europe Endocrine Function Testing Market Next 5 year Forecast & Analysis

    ReportsnReports.com adds report 2014 Strategies for the European Endocrine Function Testing Market to its store. This new report provides a comprehensive analysis of the European endocrine function market, including emerging tests, technologies, instrumentation, sales forecasts by country, market shares and strategic profiles of leading suppliers. The report provides test volume and sales ...


  • Clinical Hemostasis Testing Industry : Coagulation Technologies And Products Analyzed in Research Report

    ReportsnReports.com adds report Hemostasis Testing Market 2014 : Strategic Assessments of Leading Suppliers to its store. This report presents the clinical significance and market needs for major hemostasis laboratory tests, as well as extensive listings of companies developing or marketing innovative coagulation technologies and products. The report also includes strategic assessments of current ...


  • Detecting Mercury in Water

    Determination of Mercury (Hg) in Water by Hand-Held, Portable Cold Vapor Atomic Fluorescence SpectrometryWater is the most familiar and most abundant compound on Earth, making up 71% of its surface area.[1]It is a vital component for all known forms of life and is the aquatic habitat for thousands of species of microalgae, fish and shellfish. [2] With the presence of running water in our ...


    By Arizona Instrument LLC

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you