water treatment chemical feed monitor Articles

  • Chemical monitoring strategy for the assessment of advanced water treatment plant performance

    A pilot-scale plant was employed to validate the performance of a proposed full-scale advanced water treatment plant (AWTP) in Sydney, Australia. The primary aim of this study was to develop a chemical monitoring program that can demonstrate proper plant operation resulting in the removal of priority chemical constituents in the product water. The feed water quality to the pilot plant was ...


    By IWA Publishing

  • Looking Beyond Chemical Water Treatment Case Study

    When you think of an environmentally friendly company, a steel processing plant does not typically come to mind. However, Stripco Inc. of Mishawaka, IN, a manufacturer of production-ready, cold-rolled steel coils, is the exception. In August of 1995, Stripco made a wise decision that also proved to be cost-effective and environmentally- friendly when they installed a Superior Environmentalist ...

  • Common Boiler Feed Water Treatment Issues and How to Avoid Them

    When treating boiler feed water (the combination of boiler makeup and condensate return water), several issues can arise that cause boiler scaling, corrosion, fouling, and system failure. Below, we break down the most common boiler feed water issues and how to avoid them to help ensure system efficiency and operational safety. While treating boiler feed water is extremely ...


    By SAMCO Technologies, Inc.

  • Integrated process control for recirculating cooling water treatment in the coal chemical industry

    This work focused on the integrated process of the recirculating cooling water (RCW) treatment to achieve approximate zero emission in the coal chemical industry. The benefits of fractional and comprehensive RCW treatment were quantified and qualified by using a water and mass balance approach. Limits of cycle of concentrations and some encountered bottlenecks were used to ascertain set target ...


    By IWA Publishing

  • Waste Water Batch Treatment System

    Industrial Wastewater Treatment Batch Treatment Systems (BTS) are intended for lower daily volumes of wastewater typically less than 10,000 gallons per day and designed to “batch” treat wastewater from start to finish at one time. In a batch treatment system, a volume of wastewater is gathered, treated by chemical / physical / biological means, and discharged. Storage ...


    By Water Innovations, Inc

  • Influence of feed quality on seawater reverse osmosis performance

    The trouble-free operation of a Reverse Osmosis (RO) plant relies on the quality of the treated feed water, which highlights the need for optimisation of the pre-treatment steps. The quality of raw seawater varies with time in terms of suspended and colloidal load, along with the dissolved salt content. In a conventional pre-treatment scheme, consisting of clarification and particulate and micron ...


    By Inderscience Publishers

  • Treatment plant protected by effluent monitor at major drinks factory

    The installation of a BioTector continuous TOC (Total Organic Carbon) monitor to police the front end of Cobevco’s wastewater treatment plant has enabled tight control of the treatment process. Delivering results 20 times faster than laboratory techniques, the monitor at the Elton facility in Cheshire provides advance notice of organic overload so that the plant is able to instantly divert ...


  • Modular treatment system neutralizes process water

    A self-contained pH control and monitoring sys- tem for ready mixed operations yields clean water for recycling or permitted discharge to the environment. Fortrans' Model 5000S uses car- bon dioxide gas to neutralize high-pH process water, offering precise alkalinity monitoring and control of water in pits, settling basins and other containment areas, as it lowers total suspended solids. Designed ...


    By Fortrans, Inc.

  • In Situ Biological Treatment for Ground Water, Surface Water, and Leachate

    The main advantage of in situ treatment is that it allows ground water to be treated without being brought to the surface, resulting in significant cost savings. In situ treatment, however, generally requires longer time periods, and there is less certainty about the uniformity of treatment because of the variability in aquifer characteristics and because the efficacy of the process is more ...

  • Organics Monitoring: A Practical Guide

    Preventing product loss, lowering waste treatment costs, and reducing system maintenance and energy consumption through organics monitoring in the chemical, refining, food, and wastewater treatment industries. Summary Process water and steam condensate contamination includes organic, inorganic, and biological components. Sources of organic contamination include process ...


    By GE Analytical Instruments

  • Application notes: The Sievers InnovOx TOC analyzer: boiler water monitoring

    Background A boiler system is a semi-closed loop system in which water is heated and converted into steam to power a generator. The steam is then allowed to form a condensate and the process is repeated. Boiler water chemistry directly impacts boiler efficiency and fuel use. Improper water treatment allows scale formation and corrosion. Boiler scale and deposits form when impurities ...


    By GE Analytical Instruments

  • What Is a Cooling Tower Water Treatment System and How Does It Work?

    For industrial companies using a cooling tower for its facility, some type of cooling tower water treatment system is usually necessary to ensure an efficient process and long equipment service life. If cooling tower water is left untreated, organic growth, fouling, scaling, and corrosion can reduce plant productivity, cause plant downtime, and require costly equipment replacements down the ...


    By SAMCO Technologies, Inc.

  • Five of the Best Cooling Tower Water Treatment Equipment Supply and Technology Companies

    Here at SAMCO technologies, our custom-engineered, cutting-edge solutions for your cooling tower water treatment needs have been developed by helping our customers solve some of the most complex purity and separation issues globally for over 40 years. Because of our skilled engineers and overall expertise in cooling tower water treatment, we are confident that our solutions are some of the best ...


    By SAMCO Technologies, Inc.

  • Common Cooling Tower Water Treatment Problems and How to Solve Them

    For companies using cooling towers to remove heat from an industrial process or for cooling large buildings, there are several issues that can surface during the cooling tower water treatment process that we see on a regular basis. Because these issues occur often, it’s important to know what to look out for in advance, perhaps saving you some time and resources down the line. ...


    By SAMCO Technologies, Inc.

  • Ex Situ Biological Treatment for Groundwater, Surface Water, and Leachate

    The main advantage of ex situ treatment is that it generally requires shorter time periods, and there is more certainty about the uniformity of treatment because of the ability to monitor and continuously mix the groundwater. However, ex situ treatment requires pumping of groundwater, leading to increased costs and engineering for equipment, possible permitting, and material handling. ...

  • Treatment of Cyanide Bearing Wastewaters

    Water Innovations utilizes a 2-stage Cyanide Oxidation (CN) system that can treat from 2 GPM to 10 GPM. In the first stage of treatment, hypochlorite oxidizes cyanide to cyanate. It consists of two double-wall “Batch” Cyanide Oxidation Tank and an accumulation tank for cyanide-bearing rinse water, each tank equipped with one mixer. Wastewater containing cyanide will be pumped or flow ...


    By Water Innovations, Inc

  • Mixed Oxidant Replaces “Cocktail” of Chemicals in Power Plan

    Cooling Tower Water Systes Synopsis In 2010 NIPSCO installed two MIOX RIO Mixed Oxidant Solution (MOS) chlorine generator systems on two of the four cooling towers at R.M. Schahfer Generating Station.  After switching to MIOX for cooling tower water treatment, the two towers experienced minimized algae growth, better biocontrol and lower Legionella counts, ...

  • Evaluations of ChemTreat Solutions Automated Feed Systems at Southeast paper mill case study

    A large Southeast Paper Mill was experiencing poor control with their water treatment supplier who was using pace and chemical verification instrumentation. The mill was experiencing major variances in cycle control, conductivity, P-alkalinity, and phosphate control. ChemTreat had investigated the causes of these variances and submitted their recommendations for improvement. As a result, ...


    By ChemTreat, Inc.

  • Top International News in Chemical Policy and Regulation

    AUSTRALIA Australia Releases Third Consultation Paper Concerning NICNAS Reform: On April 29, 2016, the National Industrial Chemicals Notification and Assessment Scheme (NICNAS) published the third consultation paper on its  ...


    By Acta Group

  • Treatment Options for Molten Sulfur Storage

    Documento sin título ...


    By Merichem Company

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you