water treatment chemical manufacturer Articles

  • Manufacturer of Water Treatment Chemicals and Water Additives

    Water treatment is a process for treating sewage or modern wastewater and converting it into more acceptable form for a specific end-use. The end utilization of this treated water might be drinking, mechanical water supply, water system, waterway stream support, water diversion or numerous different uses, including being securely returned to nature. Water treatment expels ...


    By Water Chemicals

  • Former Chemical Manufacturing Facility

    Charleston, South Carolina, USA Project Bioremediation of Soil Containing Toxaphene and DDT Summary The application of DARAMEND® served to reductively dechlorinate and subsequently mineralize chlorinated herbicides and pesticides present in soil. This project was the third in a series of three pilot-scale projects aimed at validating DARAMEND® ...


  • 50 GPM Parallel Plate Clarifier for raw water treatment at a chemical manufacturing plant

    Challenge A chemical manufacturing company needed to clarify surface water that was being drawn from a local creek for use as a cooling agent in their manufacturing process. The existing system was 30-years old, corroded, and not very adept at handling solids after separation from the water. Space requirements were a limiting factor in the installation. ...

  • "A Non-Chemical Water Treatment for Cooling Towers"

    Untitled Document Introduction This paper will describe a case study of a ...


    By Dolphin WaterCare

  • Looking Beyond Chemical Water Treatment Case Study

    When you think of an environmentally friendly company, a steel processing plant does not typically come to mind. However, Stripco Inc. of Mishawaka, IN, a manufacturer of production-ready, cold-rolled steel coils, is the exception. In August of 1995, Stripco made a wise decision that also proved to be cost-effective and environmentally- friendly when they installed a Superior Environmentalist ...

  • Hazardous Location LEDs in Chemical Manufacturing Facilities

    Employees inside chemical manufacturing plants are exposed to some of the most unforgiving work conditions in the industrial sector. This is because in such environments, workers are exposed to extreme temperatures, dust, volatile chemicals and invisible, explosive gases. Common protection methods against explosive risks include containment, segregation and prevention. Out of all the ...


    By Larson Electronics LLC

  • Decrease in Sludge and Wastewater: Nowra Chemical Manufacturers

     Table of Contents Executive Summary 1. Review of Nowra Chemicals Operations 2. Planning and ...


  • Chemical-Free Treatment of Recirculating Water Using Pulsed-Power

    Untitled Document Regulatory pressures and economic considerations require industry to become cleaner, more efficient, and more environmentally benign. Such operating principles advance not only ...


    By Dolphin WaterCare

  • Comparing Capacity Expansion and Waste Minimization Options at a Chemical Manufacturing Facility

    ABSTRACTIndustrial wastewater treatment facilities that are nearing their capacity limit often have a relief option that typically is not available to municipal treatment facilities. That option is to reduce waste loads coming from the production areas by optimizing manufacturing processes so that less waste is generated per pound of product made. In making the decision between reducing waste ...

  • Chemical wastewater treatment applying a membrane bioreactor (MBR)

    IntroductionAt the current time Membrane Bioreactors (MBR) are the primary focus of wastewater treatment technologies. MBR is a combination of biological activated sludge process for the removal of nutrients and a membrane filtration for separation of biomass and treated water. In industrial wastewater treatment MBRs have proven to be a particularly reliable technique [Cornel et al., 2006]. The ...


    By MICRODYN-NADIR GmbH

  • Spackling Adhesive Manufacturer

    Floccin J was used to treat these samples of spackling compound wastewater. The sample was at a neutral pH and required no pH adjustment. The Floccin-J was added at a dosage of 0.12 grams in 100 ml of wastewater. For a 1,000- gallon batch treatment, this would equate to a chemical cost of $15.00 with excellent water clarity that could be reused in the ...


    By Integrated Engineers Inc.

  • Automotive Transmission Manufacturing Plant

    Dynatec is engaged to provide a complete WWTP on a design build own operate and maintain basis. The Problem The automotive company was building a new plant in Georgia and required treatment for wastewater for the new plant and needed to reduce their capital expenditures for the new facility. The plant produces wastewater containing oil, metals, and high COD.  Further, ...


    By Dynatec Systems Inc.

  • Latex Paint Manufacturer-2

    This company was using traditional chemistry of aluminum sulfate, lime to adjust the pH, followed by a flocculant. Switching to Floccin 1107 cut the chemical costs by 30% and decreased the number of chemicals to one. The facility was also using large quantities of DE to generate a dry cake with their bladder press. The Floccin 1107 decreased the usage of the DE by about 50% based on the visual ...


    By Integrated Engineers Inc.

  • Membrane Bioreactor for Automobile Manufacturer

    Dynatec provided a system to treat wastewater from Ford's automotive assembly plant. The Problem The existing batch chemical treatment system for oil and metals removal was unable to meet the new standards for discharge to local POTW. The new requirements called for lower BOD and total Nitrogen and there was no way to make the existing system able to meet the standards. ...


    By Dynatec Systems Inc.

  • Bioaugmentation treatment of PV wafer manufacturing wastewater by microbial culture

    The wastewater of silicon photovoltaic (PV) battery manufacturing contained polyethylene glycol (PEG) and detergents, which possessed the characteristics of high content of organics and low bioavailability, and then resulted in high treatment costs. To address the difficulties of existing treatment facilities in stably meeting discharge standards, eight tons of microbial culture (consisting of ...


    By IWA Publishing

  • MBR for Major Cereal Manufacturer

    Dynatec provides a turnkey wastewater solution to a food manufacturing wastewater process for a major cereal manufacturer. The problem A major cereal manufacturing plant manufacturer needed to upgrade their treatment process. MBR was selected, and the company was about 1 month away from entering into a contract with a major MBR supplier of submerged hollow fiber membrane ...


    By Dynatec Systems Inc.

  • Process Water Treatment – Challenges and Solutions

    Untitled Document Clean water is needed by chemical-process plants for a wide range of process-related and auxiliary uses. Likewise wide is the range of options available to the ...


  • Water Treatment Equipment Markets in China

    China’s demand for Water Treatment Equipment has grown at a fast pace in the past decade. In the next decade, both production and demand will continue to grow. The Chinese economy maintains a high speed growth which has been stimulated by the consecutive increases of industrial output, import & export, consumer consumption and capital investment for over two decades. This new study ...


  • Dolphins to the Rescue: Dolphins Eliminate the Need for Chemical Treatments to Prevent Scaling

    Untitled Document Mineral scale accumulates daily inside the boilers and cooling towers that keep us warm in the winter and cool in the summer. Scale is a bad actor causing loss of efficiency, ...


    By Dolphin WaterCare

  • Beef Processing Waste Water Treatment

    Industrial Beef Processor Wastewater Treatment Success Story Beef Processing Wastewater Treatment - $80k Saved a Month! First Beef Processing Facility This facility ...


    By Integrated Engineers Inc.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you