water treatment chemical product Articles

  • Preventing Rust Formation with Electronic Water Treatment

    The growing demand for water for industrial applications, power production and water supply has resulted in an increasing need for water treatment. The water used in industry comes from a range of sources such as rivers, lakes, wells and oceans and contains dissolved and suspended solids.  In addition the industrial world has to reuse water which in turn causes it to be highly concentrated ...

  • Chemistry of Chlorine Application and Production for the Disinfection of Water and Wastewater

     ABSTRACT A thorough understanding of chlorine and sodium hypochlorite chemistry is essential in optimizing their usage in disinfection of water and wastewater. High price of both chemicals and hazards involved in their transportation to plant sites have prompted many utilities to consider generation of these chemical on-site. A detailed discussion of the critical engineering concepts ...

  • Types of Water Treatment Systems - Case Study

    There are different types of water treatment systems, and knowing the difference between them can help you make an informed decision on just what type of treatment you’ll need for your water. There is no best water treatment system that will meet everyone’s needs—each system has its benefits and deficiencies. Here are a few of the most common types of water treatment systems. ...

  • Meat processor creates new product with treatment - Case Study

    The AIRE-O2 MICROFLOAT®’s immediate impact was a $100/day chemical savings Problem A southern, USA red meat processor’s wastewater treatment was getting more complex and expensive but still did not yield the expected results. Regulations were getting stricter and stricter as well. The processor was spending US $192 per day on ferric chloride to promote coagulation ...

  • Beginner´s Guide to Biological Treatment of Water

    Water treatment systems make safe and civilized life possible for people of all ages. Access to clean, reliable, and safe water is one of the first building blocks of a good social system. That is why experts have developed advanced and reliable ways to remove harmful substances from the water supply, including fecal matter, bacteria, arsenic, and other dangerous or even poisonous matter.   ...

  • Common Treatment Technologies for Explosives in Ground Water, Surface Water, and Leachate

    Explosives-contaminated process waste waters can be subdivided into two categories: red water, which comes strictly from the manufacture of TNT, and pink water, which includes any washwater associated with load, assemble, and pack (LAP) operations or with the demilitarization of munitions involving contact with finished explosive. Despite their names, red and pink water cannot be identified by ...

  • Pulp & Paper Water Treatment - A look at optimizing water resource management

    Application Case Study (Pulp/Paper Operations) The pulp and paper industry has traditionally been a consumer of large amounts of fresh water and power. Recently, increased focus has been given to the optimized efficiency of paper mills and to the environmental sustainability footprint of the industry. Therefore, water resource management has become a more critical factor ...

  • Oil Well Production Water - Case Study

    Introduction Clean Water Technology, Inc. (CWT) is a global water and wastewater treatment firm serving Clients worldwide. The Colombian based SAIDA S.A. (Soluciones Ambientales Integrales de La Amazonia “SAIDA”), provides wastewater treatment for several oil well processors in the area. With increased production from several of their Clients, SAIDA needed to expand their Waste ...


    By Clean Water Technology, Inc.

  • Crumbling Concrete Water Networks Linked to Common Water Treatment Additive

    Concrete distribution and sewer networks are being corroded at an alarming rate partly because of a commonly used additive in the domestic drinking water and wastewater treatment process according to published reports in the journal Science. In countries throughout the world from industrialized nations like Australia and the USA to developing nations like Colombia, Ghana and the Philippines, the ...

  • Disinfection By-Products (DBP) Compliance through Pre-treatment for TOC Removal

    Over the last few years, utilities have adjusted their existing processes to reduce the formation of DBPs in order to comply with the Stage 1 DBP Rule. With Stage 2 looming in the near future, many utilities have nothing left to optimize in order to minimize DBP peaking in the distribution systems. A non-chemical treatment process was developed in response to the need to remove greater amounts ...


    By Orica Australia Pty Ltd

  • Automatic control of the effluent turbidity from a chemically enhanced primary treatment with microsieving

    For chemically enhanced primary treatment (CEPT) with microsieving, a feedback proportional integral controller combined with a feedforward compensator was used in large pilot scale to control effluent water turbidity to desired set points. The effluent water turbidity from the microsieve was maintained at various set points in the range 12–80 NTU basically independent for a number of studied ...


    By IWA Publishing

  • Controlling Odors from Waste Water Treatment Plants

    INTRODUCTION In recent years, there is growing public awareness of odors from waste water treatment plants, which mainly stems from the following observed trends: The public is less tolerant of objectionable odors from waste water treatment plants; Many waste water treatment plants have seen residential, commercial, or other developments established near the facility ...


    By PRD Tech, Inc.

  • City expands water treatment facilities to meet growth

    The City of Coon Rapids, Minnesota recently completed the expansion and upgrade of its East and West Water Treatment facilities. Production at the plants was increased by 66% at the East Plant and 40% at the West Plant to bring the total design capacity to 22.3 million gallons per day. New filters, additional backwash water reclaim capacity, chemical feed systems, and new control systems for ...


    By Filtronics, Incorporated

  • Electronic water treatment reduces fouling in heat exchangers

    The deposition of material on heat transfer surfaces is called fouling which significantly impacts on the thermal and mechanical performance of heat exchangers. Fouling increases the overall thermal resistance and lowers the overall heat transfer coefficient of heat exchangers as well as impeding fluid flow, accelerating corrosion and increasing pressure drop across the heat ...

  • Algae control in drinking water treatment - case study

    For the Ministry of Agriculture in Cyprus, LG Sound b.v installed 33 LG Sonic, ultrasonic devices in the Limassol water treatment plant, to prevent bad odour and taste to the water caused by geosmins in the water. The earthy taste problem persisted during summer of 2010 and various physical, chemical and biological tests were done in order to check the process efficiency, which showed problems ...


    By LG Sonic

  • Case study - Olive mill waste water treatment

    The production of olive oil generates two kind of waste waters: RINSING WATERS: the quantity is subject to change. It can be re-circulated, after the settling to remove the solids, or discharged directly. SLUDGE: vegetation water with additional water, whose quantity is subject to change. In case of traditional oil mills, the hot additional water flows to the inlet of the centrifuge. Part ...


    By EVALED-Evaporator

  • A modified anaerobic digestion process with chemical sludge pre-treatment and its modelling

    Activated Sludge Models (ASMs) assume an unbiodegradable organic particulate fraction in the activated sludge, which is derived from the decay of active microorganisms in the sludge and/or introduced from wastewater. In this study, a seasonal change of such activated sludge constituents in a municipal wastewater treatment plant was monitored for 1.5 years. The chemical oxygen demand ratio of the ...


    By IWA Publishing

  • ELECTRONIC WATER TREATMENT REDUCES FOULING AND CORROSION IN PIPELINES

    Increasing pressure loss in the pipeline is often caused by scale corrosion or product fouling of the internal surfaces. This condition slows transmission and distribution capacity, and can require more than just routine maintenance if it remains unaddressed. Interior corrosion, fouling and leakage in pipeline systems will adversely impact bottom-line operations. ...

  • Electronic Water Treatment Reduces Fouling In Reverse Osmosis

    Reverse Osmosis (RO) is used in processes requiring high-quality, purified water, such in semi-conductor processing or biochemical applications and can be used to treat boiler feed water, industrial wastewater or process water. A water purification technique, it reduces the quantity of dissolved solids in solution. RO uses waterline pressure together with energy consuming pressurizing pumps that ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you