water treatment equipment manufacturer Articles

  • Food Manufacturing Wastewater Treatment

    Facility Background The new YIBO, Inc. facility in Warrenton MO is the firm's first US production plant. Using state of the art equipment they will manufacture 26 varieties of soy sauce products for the commercial market. Five gallon containers will be distributed nationwide. As a discharge requirement the local POTW requested a wastewater plant for effluent control prior to ...


    By Auquix, LLC

  • Processing Equipment Cleaning Wastewater Treatment

    Process Equipment Cleaning Wastewater Treatability - 7 Wastewater Samples Tested Individually & Combined Using Floccin™ Integrated Engineers provided treatability services for a company that chemically cleans process equipment. They had 7 waste streams from the process onsite. The samples ...


    By Integrated Engineers Inc.

  • 50 GPM Parallel Plate Clarifier for raw water treatment at a chemical manufacturing plant

    Challenge A chemical manufacturing company needed to clarify surface water that was being drawn from a local creek for use as a cooling agent in their manufacturing process. The existing system was 30-years old, corroded, and not very adept at handling solids after separation from the water. Space requirements were a limiting factor in the installation. ...

  • What is cooling tower water treatment?

    It is a dynamic manufacturer and supplier of sustainable water and wastewater treatment solutions. The cooling tower water treatment is an integral part of a process in many in industries. The water treatment problems can very costly when the cause of heat transfers in the cooling tower, health and safety concerns and equipment failure. For this problem some company ...

  • TIGG Groundwater Treatment Equipment System Solves Remediation Problems

    When an experienced environmental remediation company secured a contract to clean up a former manufactured gas plant in a New York community, the contractor realized the groundwater environmental remediation process would require a host of different technologies to address contaminated soil as well as ground and surface water.  TIGG was called upon to provide a solution for treating the ...


    By TIGG, LLC

  • Water recovery system reduces soft drink manufacturers water waste by 35%

    The filtration and water treatment specialist Puresep provide leading soft drinks manufacturer with a state of the art system to reduce their water usage Puresep were contacted to look at ways the soft drinks manufacturer could reduce the amount of rinse water sent to drain – in order to help them achieve their water reduction targets Following an onsite review of the current rinse ...


    By Water Active Ltd

  • Water Treatment using Wireless I/0

    Rugged Wireless I/O network from Banner Engineering for remote sensing and actuation Banner Engineering offers a rugged, self-contained wireless network that provides reliable configured I/O for remote sensing and actuation. The DX series are designed for process and assembly/manufacturing automation, remote tank level management and waste water treatment installations. Monitoring ...


    By Banner Engineering Corp.

  • Emerging Trends In UV Disinfection For Water Treatment

    Introduction The UV disinfection industry has experienced tremendous growth over the last 20 years.  The development of new UV technologies over this period has been a perfect example of an industry investing to meet market demand – in this case demand for an effective, low cost, and environmentally friendly disinfection technology.  The acceptance of UV disinfection at water plants ...

  • Looking Beyond Chemical Water Treatment Case Study

    When you think of an environmentally friendly company, a steel processing plant does not typically come to mind. However, Stripco Inc. of Mishawaka, IN, a manufacturer of production-ready, cold-rolled steel coils, is the exception. In August of 1995, Stripco made a wise decision that also proved to be cost-effective and environmentally- friendly when they installed a Superior Environmentalist ...

  • Water contamination problems solved at automobile air bag manufacturing plant

    The Facility Based in a Rocky Mountain state, this facility produces the sodium azide pellets contained inside the air bags for automobiles produced throughout the world. The Problem During the manufacturing of the air bag propellent, frequent equipment washdowns produce large volumes of wastewater that contain sodium azide and metal sulfide salts. Sodium ...

  • Toro Equipment collaborates in the I technical conference of technological applications for sludge treatment, organized by FuturENVIRO

    Next Thursday 24 September 2015 will took place in Madrid Civil Works Engineers Association, the I Sludge Treatment Technical Conference organized by FuturENVIRO, in which Toro Equipment is a collaborator. Under the ...


    By Toro Equipment S.L.

  • What Is a Boiler Feed Water Treatment System and How Does It Work?

    For industrial companies using a boiler for its facility, some type of boiler feed water treatment system is usually necessary to ensure an efficient process and quality steam generation. The most appropriate boiler feed water treatment system will help the facility avoid costly plant downtime, expensive maintenance fees, and boiler failure as a result of scaling, ...


    By SAMCO Technologies, Inc.

  • Toro Equipment, as speaker in Technical Conference “Water Management in Canary Islands: Efficiency and Innovation”

    The Conference, organized by FuturENVIRO and Enviro Networking, takes place on 6th October in the context of Canagua & energía International Fair of Canary Islands Toro Equipment, leader company in wastewater manufacturing equipment, is holding a speech in Technical Conference about Water ...


    By Toro Equipment S.L.

  • What Is a Cooling Tower Water Treatment System and How Does It Work?

    For industrial companies using a cooling tower for its facility, some type of cooling tower water treatment system is usually necessary to ensure an efficient process and long equipment service life. If cooling tower water is left untreated, organic growth, fouling, scaling, and corrosion can reduce plant productivity, cause plant downtime, and require costly equipment replacements down the ...


    By SAMCO Technologies, Inc.

  • Wastewater Treatment Upgrade Helps Paper Manufacturer Meet Environmental Standards & Save on Operating Costs - Case Study

    PROJECT DETAILS LOCATION Tivoli, Italy CUSTOMER Consorzio Cartiere di Tivoli SRL SOLUTION Wastewater Treatment, Waste-to-Energy TECHNOLOGIES External Forced Circulation (EFC) Reactor, Oxidation, and Clarification System Sustainability is a primary goal driving ...


    By Fluence Corporation

  • Thermal Treatment Technologies

    Hot gas decontamination: Hot gas decontamination is a technology still in the pilot-scale of development that can be used for decontamination of explosives-contaminated masonry or metallic structures. The method involves sealing and insulating the structures, heating with hot gas stream to 260 °C (500 °F) for a prescribed period of time, volatilizing the explosive contaminants, and destroying ...

  • Brick Manufacturer Wastewater Case Study

    Manufacturing Wastewater Treatment Case Studies Brick Processing Manufacturer Wastewater Treatability 10.16.2009 The Morin Brick ...


    By Integrated Engineers Inc.

  • Common Boiler Feed Water Treatment Issues and How to Avoid Them

    When treating boiler feed water (the combination of boiler makeup and condensate return water), several issues can arise that cause boiler scaling, corrosion, fouling, and system failure. Below, we break down the most common boiler feed water issues and how to avoid them to help ensure system efficiency and operational safety. While treating boiler feed water is extremely ...


    By SAMCO Technologies, Inc.

  • Common Cooling Tower Water Treatment Problems and How to Solve Them

    For companies using cooling towers to remove heat from an industrial process or for cooling large buildings, there are several issues that can surface during the cooling tower water treatment process that we see on a regular basis. Because these issues occur often, it’s important to know what to look out for in advance, perhaps saving you some time and resources down the line. ...


    By SAMCO Technologies, Inc.

  • Case study: telecommunication component manufacturing

    JMC Tools, formerly ADC Solitra Inc., offers integrated RF solutions for the telecommunications industry worldwide. The product range of the company covers high frequency components and modules for cellular and PCS systems, both analogue and digital. The company has close links with the world’s leading OEM manufacturers of cellular phones and infrastructure and has a strong ...


    By Watman Ltd.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you