water treatment model Articles

  • Horizon and water treatment

    Horizon is an environment company focused on water treatment.In the latest years,with the improvement of industrial economy,water quality is becoming worse and worse.To prevent the pollution trend,our government has raised the standard of sewage discharge several times,so traditional process and technology of water treatment can’t apply for the environmental requirements and ...


    By Horizon Water Co., Ltd.

  • Nimr Water Treatment Plant Oman

    Introduction The Nimr water treatment plant (NWTP) project is located in the south of Muscat in Oman. The temperatures in the region can be as high as 60°C in the summer months, making it a harsh environment to work in. This water treatment project was co-executed by Bauer Environment and Petroleum Development Oman (PDO). The plant came online in late 2010 and has been treating ...


    By BAUER Resources GmbH

  • Energy requirements for waste water treatment

    The actual mathematical models describing global climate closely link the detected increase in global temperature to anthropogenic activity. The only energy source we can rely on in a long perspective is solar irradiation which is in the order of 10,000 kW/inhabitant. The actual primary power consumption (mainly based on fossil resources) in the developed countries is in the range of 5 to 10 ...


    By IWA Publishing

  • Water Treatment Equipment Markets in China

    China’s demand for Water Treatment Equipment has grown at a fast pace in the past decade. In the next decade, both production and demand will continue to grow. The Chinese economy maintains a high speed growth which has been stimulated by the consecutive increases of industrial output, import & export, consumer consumption and capital investment for over two decades. This new study ...


  • Dolphin System Water Treatment Study

    Untitled Document Introduction In December 2003 MCI contracted with BWI Solutions, Inc., a Sacramento based industrial ...


    By Dolphin WaterCare

  • An assessment of static and dynamic models to predict water treatment works performance

    The relative accuracy of static and dynamic water treatment works (WTWs) models was examined. Case study data from an operational works were used to calibrate and verify these models. It was found that dynamic clarification, filtration and disinfection models were more accurate than static models at predicting the final water quality of an operational site but that the root mean square errors ...


    By IWA Publishing

  • Evaluation of control strategies for drinking water treatment plants using a process model

    This research adds a method to evaluate control strategies to the design methodology for drinking water treatment plants. A process model dealing with parameters related to the calcium carbon dioxide equilibrium was set up. Using the process model, the existing control strategy was compared with a new control strategy and the effects of two different sets of input data were studied. It was ...


    By IWA Publishing

  • Modeling settling tanks for water treatment using computational fluid dynamics

    A computational fluid dynamics model is presented for the calculation of the flow, suspended solids, and tracer concentration fields in the settling tanks of the water treatment plant of Aharnes, an important component of the water supply system of the greater area of Athens, Greece. The model is applied to investigate the expected negative effect of the wind on the hydraulic and settling ...


    By IWA Publishing

  • Modeling NOM removal by softening in a surface water treatment plant

    Phenomenological models and hybrid phenomenological–chemometric models were developed to predict natural organic matter (NOM) removal based on the real water treatment data from the city of Minneapolis over a 3 year period. The analysis of the modeling results showed that the phenomenological model was able to capture the major variations of NOM removal but it tended to over predict the ...


    By IWA Publishing

  • Model success for Melbourne Water

    Untitled Document Melbourne Water ...


    By Innovyze

  • Water Quality Models

    ' In order to determine the impacts of a particular discharge on ambient water quality, it is usually necessary to model the diffusion and dispersion of the discharge in the relevant water body. The approach applies both to new discharges and to upgrading of existing sources. This note provides guidance on models that may be applicable in the context of typical Bank projects.' Introduction ...


    By The World Bank

  • Simulation for Operation and Control of Reject Water Treatment Processes

    The recycled nutrient load of the reject water streams from solids handling is considerable, and can amount to 15-25% of the influent nitrogen load. A number of sidestream biological processes have been developed for treating the ammonia component of the reject water before returning it to the liquid train. This paper describes a plant-wide model that includes the reactions important in ...

  • Modular treatment system neutralizes process water

    A self-contained pH control and monitoring sys- tem for ready mixed operations yields clean water for recycling or permitted discharge to the environment. Fortrans' Model 5000S uses car- bon dioxide gas to neutralize high-pH process water, offering precise alkalinity monitoring and control of water in pits, settling basins and other containment areas, as it lowers total suspended solids. Designed ...


    By Fortrans, Inc.

  • Cost effectiveness of centralised and decentralised storm water treatment

    As part of a research & development project commissioned by the Land of North Rhine-Westphalia's Ministry for the Environment and Nature Conservation, Agriculture and Consumer Protection (MUNLV) an examination is being carried out of the general possibilities for centralised and decentralised treatment storm water runoff to be discharged into (canalised) receiving waters and the costs ensuing ...


    By IWA Publishing

  • Calibrating an optimal condition model for solar water disinfection in peri-urban household water treatment in Kampala, Uganda

    In low income settlements where the quality of drinking water is highly contaminated due to poor hygienic practices at community and household levels, there is need for appropriate, simple, affordable and environmentally sustainable household water treatment technology. Solar water disinfection (SODIS) that utilizes both the thermal and ultra-violet effect of solar radiation to disinfect water ...


    By IWA Publishing

  • Emerging Trends In UV Disinfection For Water Treatment

    Introduction The UV disinfection industry has experienced tremendous growth over the last 20 years.  The development of new UV technologies over this period has been a perfect example of an industry investing to meet market demand – in this case demand for an effective, low cost, and environmentally friendly disinfection technology.  The acceptance of UV disinfection at water plants ...

  • Ballast water treatment on Alaskan coastline - Case Study

    An Alaskan oil terminal had to deal with contaminated ballast water that needed to be collected and treated before discharge. They had a biological treatment process on site, but it was difficult to operate in the temperature and contaminant loading extremes the site experiences and they struggled to get it to work consistently. The plant is also required to treat spring snowmelt and rain that ...

  • "A Non-Chemical Water Treatment for Cooling Towers"

    Untitled Document Introduction This paper will describe a case study of a ...


    By Dolphin WaterCare

  • Perspectives on modelling micropollutants in wastewater treatment plants

    Models for predicting the fate of micropollutants (MPs) in wastewater treatment plants (WWTPs) have been developed to provide engineers and decision-makers with tools that they can use to improve their understanding of, and evaluate how to optimize, the removal of MPs and determine their impact on the receiving waters. This paper provides an overview of such models, and discusses the impact of ...


    By IWA Publishing

  • Treatment of whey wastewater by supercritical water oxidation

    Whey wastewater is a by-product of cheese industry, which causes environmental pollution problems due to its containment of heavy organic pollutants. Conventional methods such as biological treatment and physico-chemical treatment are insufficient or ineffective. In this paper, the treatment of cheese whey wastewater has been carried out by supercritical water oxidation, using hydrogen peroxide ...


    By IWA Publishing

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you