water well casing Articles

  • Case study: Salinity eradication – well water

    Operational Profile Farm Name: Singleton& Sons Farms Crop Type: Lay’s ChipPotatoes Location: Florida Total Acres: 1500 Acres Treated: 85 Irrigation: Drip Season: 4 Months Water Source: Well Key ...


    By Eco1st Technology Group

  • Oil Well Production Water - Case Study

    Introduction Clean Water Technology, Inc. (CWT) is a global water and wastewater treatment firm serving Clients worldwide. The Colombian based SAIDA S.A. (Soluciones Ambientales Integrales de La Amazonia “SAIDA”), provides wastewater treatment for several oil well processors in the area. With increased production from several of their Clients, SAIDA needed to expand their Waste ...


    By Clean Water Technology, Inc.

  • Case Study - Groundwater: 125 GPM Water Well

    Groundwater Well Locating for West Texas Fracking Operation Date:  June 20, 2014 Site:  West-Texas – undisclosed oil and gas field Equipment:  SuperStingR8 WiFi with SwitchBox112 with passive cables spaced at 6m.  Dipole-dipole and strong gradient array Software:  EarthImager2D with a finite element inversion model ...


    By Advanced Geosciences, Inc.

  • Case Study - Groundwater: Locating Water Wells

    South Sudan: 4000 L/min water well Date:  February 25, 2015 Site:  Yeri Mozo Village, South Sudan, Africa Equipment:  SuperStingR8 WiFi, SwitchBox56 and passive cables spaced at 5m. Software:  EarthImager2D with a finite element inversion model of dipole-dipole array data. Results:  Resistivity imaging successfully ...


    By Advanced Geosciences, Inc.

  • Case study - Well monitoring for a water supplier

    The municipality company, in city of Luebek, Germany, provides potable water for approximately 120,000 households, all pumped from more than 30 wells.  These wells have water levels as deep as 160 meters.  The water levels of these groundwater wells must be measured with the highest possible accuracy.  Previously, the pressure probe's analogue output signals (4…20mA) that ...


    By The OTT Hydromet Group

  • Landfill pumps for Gas well dewatering - Case Study

    AutoPumps Keep the Power On for Thousands of Florida Homes Waste Management's Springhill Regional Landfill near Campbellton, Florida generates "green" energy by extracting and burning the methane in landfill gas. Its $7 million landfill gas energy (LFGE) plant, with six large Caterpillar engines running 24 hours a day, 7 days a week, is capable of producing 4.8 million watts of power. ...

  • Pumping wells & sewage lines case study

    Dorset Council - Bioremediation of Sewerage System The Dorset Municipality situated in the North East of Tasmania covers an area of 3196 km2. It comprises 14 townships, 10 water schemes and reticulated sewerage schemes for its two largest townships, Scottsdale and Bridport. Their populations are 1922 and 1234 respectively. Bridport’s population increases to approximately 6000 over ...


    By Cleveland Biotech Ltd.

  • Forensic Analysis of Horizontal Well Systems - Case Study

    Project Location: Eastern New York Client: Public Utility – Major Airport Contamination: Jet Fuel Site Size: 10+ Acres Project Description: Having contracted with a large nationally known Environmental Remediation Company ...


    By Integrity Engineering, Inc.

  • Quilicura, Chile Well #3 - Case Study

    Quilicura is a municipality located in the Santiago Metropolitan Region in Chile. Well #3 has a flow of 1600 gallons per minute (100 liters per second). The well has a high concentration of arsenic that fluctuates between 0.040 mg/L and 0.060 mg/L, well above the World Health Organization's standard of 0.010 mg/L. In addition to the high arsenic concentration, the site has challenges with pH that ...

  • Case study 103: Oil well and salt water disposal site

    Operational Profile Type of Operation: OilWell,Salt Water InjectionWell Location: Texas Equipment: 10x20water knockout, 6x20 heated vertical separator b/d: 3800 bbl Gravity of oil: 41 degrees BS&W beforestudy: 0.04% Unit size: 3” ...


    By Eco1st Technology Group

  • Why Bentonite Hurts Well Production: The Case for Biopolymer Drilling Fluid

    Bentonite is a naturally-occurring clay material, largely composed of the mineral, sodium mont-morillonite. The dominant property of bentonite is that it swells to many times its dry volume when hydrated by water, forming a viscous fluid with high gel strength. This makes bentonite an excellent product when used as a sealant, for preventing the influx of surface water into a well, sealing ...

  • San Juan Island well production and tank level monitoring case study

    San Juan Island is a popular resort destination whose population fluctuates with the season and the arrival of Orca whales and salmon runs. To get to the island, you must first drive an hour north of Seattle to the city of Anacortes. From there you take a two-hour ferry ride through a 130 island group to arrive at the 20 mile San Juan Island, which is at the waterway entrance to Puget Sound. Bob ...


    By Mission Communications, LLC

  • Case study - An air/ozone Sparge curtain to protect a municipal supply well

    Description Releases of petroleum contaminants from a retail gasoline station in a medium-sized California Central Valley town threatened a municipal supply well immediately adjacent and approximately 200 ft downgradient to the station. Methyl tert-butyl ether (MTBE) was present in groundwater concentrations up to 30,000 micrograms per liter (µg/L) and GRO up to 33,000 ...

  • Locating Groundwater Wells for Fracking Operations in West Texas - Case Study

    In June 2014, our clients used AGI resistivity imaging tools to successfully locate a 125-gallon-per-minute groundwater well in West Texas as well as geohazards that could, if left unlocated, cause significant damage to property and increase costs. Process Our clients used the ...


    By Advanced Geosciences, Inc.

  • Produced Water Case Study

    Challenge Managing the increasing volumes of produced water associated with oil & gas production as well as sourcing water for operations is becoming more challenging for E&P companies. Handling oily wastewaters with high and variable contents of O&G and TSS requires complex and costly treatment trains with conventional technologies. To evaluate akvoFloat ’s ...


    By akvola Technologies

  • Well oiled machines

    On November 1, 2004, Bridgewater's first oil skimmer began removing oil from its mill drains. At a cost of $6,500, the skimmer, supplied by Abanaki UK Ltd, represents a significant investment and underlies Bridgewater's commitment to enhancing the operation of its Effluent Treatment Plant. The acquisition of an oil skimmer materialized following lengthy periods of under performance from a ...


    By Abanaki Corporation

  • Case study: RMOTC - Using existing wells, hydro-geologic barriers are mapped.

    In August of 2005, Willowstick Technologies, LLC performed an AquaTrack study at the Teapot Dome oil field near Casper, Wyoming. The project was performed together with the assistance of the Rocky Mountain Oilfield Testing Center (RMOTC), a unit of the United States Department of Energy. The purpose of the project was to demonstrate how the AquaTrack technology can be applied to ...


    By Willowstick Technologies LLC

  • Case Study – Water Utility

    Sweetwater Authority, CA Sweetwater Authority’s mission is to provide its current and future customers with a safe, reliable and affordable water supply through the use of the best available technology, sound management practices, public participation and a balanced approach to human and environmental needs. Application Sweetwater regularly ...


    By Seveno Pty Ltd

  • Thames water case study

    Allowing quick and easy data interrogation Thames Water is the UK’s largest water and sewerage company, serving 14 million customers across London and the Thames Valley.Every day, Thames Water supplies 2,600 million litres of tap water to 9 million customers across London and the Thames Valley. Over 400,000 tests per year are carried out to ensure their drinking water meets ...


    By Rivo, a Sphera Company

  • Evaluation of a Horizontal Well

    Background: Air Sparging Air sparging is an in-situ remediation technology where air is injected into the saturated zone of an aquifer. It is an alternative to conventional ex-situ pump and treat systems for remediation of contaminated ground water. It is necessary to understand the pattern of air flow that will occur in the subsurface in order to determine the optimal placement, ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you