water well drilling equipment Articles

  • Raw material cycle: from chip to briquette to product - Case Study

    Thanks to their briquetting system from RUF Frischhut can redeploy production scrap and melt it again Ludwig Frischhut GmbH and Co. KG have closed the circle on their raw material cycle by utilising a briquetting press from RUF: cast chips produced during the machining of parts for water supply and sewage disposal are pressed to solid briquettes and then melted in the in-house foundry and ...

  • Equipment List for full solids manage & drilling waste

    Solids Handle & drilling waste management are pretty important for drilling contractor. If they manage this division well, they can save lots of money on drilling mud / drilling chemicals, also they can be environmental friendly. There is much equipment needed for solids control & drilling waste ...


  • Drilling: Then & Now

    In a recent conversation with a colleague, we discussed the then and now of drilling. Reflecting back to 1988, it was jarring to realize that we have entry-level Geologists & Engineers today that were born that year! They won’t ever truly know what it was like then, and how far the drilling industry has come. They would be amazed at the lives, limbs, and hearing lost over past decades, ...


    By Woodward Drilling

  • Case Study - Groundwater: 125 GPM Water Well

    Groundwater Well Locating for West Texas Fracking Operation Date:  June 20, 2014 Site:  West-Texas – undisclosed oil and gas field Equipment:  SuperStingR8 WiFi with SwitchBox112 with passive cables spaced at 6m.  Dipole-dipole and strong gradient array Software:  EarthImager2D with a finite element inversion model ...


    By Advanced Geosciences, Inc.

  • How to Deal with Drilling Waste

    At present, environmental protection is a basic state policy in China, and it has been a strategic mission and goal for our country to maintain a sustainable development of society, economy and environment. Along with the continuous improvement of environmental laws and the increasing environmental awareness among people, the departments concerned have successively enacted various environmental ...


  • Drill King International is exploring reverse-circulation drilling opportunities in Chile

    The new XT RC50 hammer from Drill King International completed drilling trials at the beginning of August 2016. This 5in (127mm) reverse-circulation (RC) hammer is the first one from the XT (Extreme Torque) series, introduced by the down-the-hole (DTH) drilling equipment manufacturer from Texas, US. The XT RC hammer series will complement Drill King's extensive line of DTH air- and water-powered ...

  • Modeling emissions from offshore drilling

    To regulate drilling activities proposed by oil and gas companies in the oil-rich Gulf of Mexico (GOM), governing agencies require the submittal and approval of certain plan documents before drilling activities can be initiated. For drilling activities in the Western GOM, these plans typically consist of one of the following: EP, or Exploration Plan – required to conduct ...


    By Trinity Consultants

  • Solids Control for Drilling Mud Process System

    Nowadays, more and more drilling contractors recognize solids control’s importance to oil and gas drilling, HDD, CSM/CBM exploration, etc. How does solid control affect well drilling? Please find the following details. Cost Comparison of Two Oil Well Drilling Let’s find the difference of two kinds of oil well drilling with and without solids control system. Final effect or result is ...


  • Maintenance of Oilfield Drilling Mud Decanter Centrifuge

    Decanter centrifuge is widely used in drilling mud separation to separate smaller solid particles after the equipment processing such as drilling mud shale shaker and drilling fluids mud cleaner or desander and desilter. Usually, decanter centrifuge is equipped with screw pumps or slurry pumps to feed drilling mud to ...


  • A new approach to drilling waste management – prevention!

    Grangemouth based Surface Active Solutions (SAS) has developed its microemulsion based technology to aid the prevention and management of drilling waste. The many activities surrounding the removal of drilling mud in surface and downhole cleaning applications usually generate significant volumes of oil contaminated drilling waste. The drilling mud is typically removed through the use of solvents ...

  • What`s at Stake: The debate over Arctic Drilling

    Royal Dutch Shell is planning to park two massive Arctic oil drilling rigs in Seattle's waterfront before they head north - but the petrochemical giant will first have to get around protesters in kayaks and others who want to thwart the new frontier in oil exploration and spark a national debate about fossil fuels and climate change. Here's a look at the debate over Shell's plans to drill in the ...


    By Associated Press

  • Q&A: A look at Shell Oil and Arctic offshore drilling

    Shell Oil drill vessels are heading to the Arctic. But they will not be permitted to drill into petroleum-bearing rock until a key piece of blowout response equipment, a capping stack, is on site. The capping stack is carried on the icebreaker Fennica, which arrived early Saturday for repairs in Portland, Oregon. Arctic offshore drilling opponents plan to demonstrate while the Fennica is ...


    By Associated Press

  • Removal of hydrogen sulfide by zinc oxide nanoparticles in drilling fluid

    Hydrogen sulfide is a very dangerous, toxic and corrosive gas. It can diffuse into drilling fluid from formations during drilling of gas and oil wells. Hydrogen sulfide should be removed from this fluid to reduce the environmental pollution, protect the health of drilling workers and prevent corrosion of pipelines and ...

  • Maximum Efficiency for...Saving Water

    In an attempt to protect our ecological surroundings and minimize the negative effects of industrial processes, it is necessary to purify and recover the waters used during washing operations of sand washing, quarrying and recycling operations. The first step is to recover 100% of the waters used and to eliminate the concentration of sludge, thus Baioni's solutions aim at offering a full sludge ...


    By Baioni Crushing Plants Spa

  • Enabling Clean Water for 25 years

    Water-well drilling equipment company Boode has been active in groundwater abstraction since 1897, later focusing on supplying PVC well casings and screen systems. Its UK concern, established by Stan and Scott Dronsfield, celebrates 25 years in business this year. Stan Dronsfield still remembers the early days back in 1989 when they operated from a wooden shed in their garden, ...


    By Boode Waterwell Systems

  • Utilizing unconventional water sources for industrial reuse

    Reclamation and reuse of unconventional wastewater sources for plant raw water, cooling water and process pre-treatment has increased substantially due to increases in the cost of drinking water, recurring water shortages that can impact business operations, and tightening government regulation. Water is required in almost every industrial sector for the processing and manufacture of products. ...


    By WesTech Engineering, Inc.

  • Produced water treatment from a to Zinc - reducing levels of Zinc in a produced water stream

    Problem At vast depths, the ocean floor consists of layers of decaying plant and animal matter, containing chemicals like sulphate and zinc, which has built up over the years. When operators are drilling, the matter is disturbed and the various chemicals are released into the water. Since the mid 1980’s the pace of exploration, production, and development in the deep waters of the Gulf of Mexico ...


    By CETCO Energy Services

  • Case study - Superfund site, water pump & treat system

    Anguil Aqua Systems LLC was contracted as part of a team of companies to implement a ground water pump and treat system intended to remove trichloroethylene (TCE) from a local aquifer designated as a Superfund Site by the Environmental Protection Agency (EPA). Though the site is nestled between the buildings and roadways of an existing and operating industrial facility, the overall extent of the ...

  • Low-Flow (Minimal Drawdown) Ground-Water Sampling Procedures

    Untitled Document Background The Regional Superfund Ground Water Forum is a group of ground-water ...


    By Solinst Canada Ltd.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you