wear protection Articles

  • CDP® wearplate: Wear Protection Solution for Flaker Aspiration Cyclone-

    A leading producer of canola-based products trusted the CastoLab® division of Eutectic Canada to manufacture two new flaker aspiration cyclones made out of CDP® wearplate. The OEM parts made out of standard steel, were unable to resist the high intensity production environment and showed early signs of erosion and abrasion after only one year of service. Our CastoLab® Services ...


    By Castolin Eutectic

  • CDP wearplate: Wear Protection Solution for Flaker Aspiration Cyclone

    A leading producer of canola-based products trusted the CastoLab division of Eutectic Canada to manufacture two new flaker aspiration cyclones made out of CDP wearplate. The OEM parts made out of standard steel, were unable to resist the high intensity production environment and showed early signs of erosion and abrasion after only one year of service. Our CastoLab Services solution was to ...


    By Castolin Eutectic

  • BAIONI supply complete dewatering centrifuge system for APS Ltd

    Situated near Slough, in Berkshire, Aggregate Processing Solutions (APS) is operating a washing plant where Baioni has recently supplied a centrifuge system to complement the whole existing plant. Baioni has boosted the capacity of its decanter centrifuges range to pave the way for further improvements in waste ...


    By Baioni Crushing Plants Spa

  • Determination of Wear Metals and Additives (Soaps) in Lubricating Oils by Atomic Absorption

    Lubricating & hydraulic fluids are crucial to the proper functioning of many types of machines: automobiles, farm equipment, heavy-duty motors, airplanes, and military hardware. Most “lubes” are simple hydro-carbon based oils or greases that have certain additives in them to prevent wear and abrasion of components (piston rings, bearings, etc.) or oxidation degradation of the oil. These additives ...


    By Buck Scientific Inc

  • New DrilTec Product Range: Wear Resistant Technology for Advanced Drilling

    The DrilTec STC Coating system has been carefully designed to cover the needs for coatings on all components of the Bottom Hole Assembly (BHA) drilling tools. The high performance features of these coating systems will match customers' expectations and assist to improve today's drilling technology. Through use of carefully selected material and alloys, the wear performance has been maximized by ...


    By Castolin Eutectic

  • The protective power of polymers

    The different engineered qualities of polymers – such as the ability to withstand high temperatures and corrosion – have given them a broad range of protective virtues. On land, at sea, and even in the sky, rubber is used in all shapes and forms to protect people. In industrial environments and infrastructures protection is needed from dangerous and demanding work environments, wear and tear, or ...

  • Protective coatings for industrial fans

    Industrial fans Large fans are commonly used to provide significant quantities of air needed for operating industrial processes. Coal and lignite fired power plants, cement, metal or woodchip manufacturing are just a few examples of industries that require homogeneous and reliable airflows. When particles are present in the air stream, they relentlessly wearout the fan surfaces. This wear ...


    By Castolin Eutectic

  • Protect Your Respiratory System

    The air around you keeps you alive. But in certain circumstances, it can cause you serious injury, illness or death. To stay alive and healthy, you need air which is clean, free of toxic gases and other contaminants, and contains the right amount of oxygen. Most of the time, the air around you at home, on the street and at work fills the bill. But under certain circumstances, the air contains ...


    By SafetySmart

  • Respiratory protection in the face of a pandemic

    If 2009’s recent media coverage regarding the spread of the H1N1 virus caused your organization to reconsider whether you need a respiratory protection plan for your employees, you were not alone. David Lahoda, Managing Editor of OSHA Watch and contributor to OSHA Healthcare Advisor, recently blogged on the wake-up call many of us have received as we rush to get our respiratory protection plans ...


    By The EI Group, Inc.

  • Pandemic preparedness - Respiratory protection 101

    Has the recent media coverage regarding the spread of the H1N1 virus caused your organization to reconsider whether you need a respiratory protection plan for your employees? If so, you’re not alone. David Lahoda, Managing Editor of OSHA Watch and contributor to OSHA Healthcare Advisor, recently blogged on the wake-up call many of us have received as we rush to get our respiratory protection ...


    By The EI Group, Inc.

  • Assess your Needs for Foot Protection

    FOOT PROTECTION - Assess your needs to see if steel toe overshoes are the right safety option In many industrial settings, when it comes to foot protection, oftentimes only toe protection is required. This is where the steel toe overshoe can be a safe and cost-effective choice. However, because the safety toe overshoe is not eligible for certification by the American Society for Testing and ...


    By Safetytoes International Inc

  • Occupational Airborne Hazards and the Importance of Proper Respiratory Protection

    Each year, the United States Occupational Safety and Health Administration (OSHA) publishes a preliminary list of the 10 most frequently cited safety and health violations for the fiscal year.  It is comprised and compiled from thousands of workplace inspections conducted by federal OSHA staff from across the country.  Most years, one of the top 10 cited violations involves respiratory ...


    By Cochrane & Associates, LLC

  • The Revised Personal Protective Equipment Standards for General Industry

     Over the years, the OSHA Standard regarding personal protective equipment has changed as times have changed. Most recently, in the early 1990's, OSHA conducted a comprehensive review of their Personal Protective Equipment Standard for General Industry. That study showed that the practices set forth in the existing regulation were outdated, and that they focused primarily on workplace issues ...


  • Heat Protection Gloves: Which Professions Use Them?

    In a wide variety of industries, companies are required to provide the proper safety equipment for their employees. Health and safety has become a top priority for businesses in recent years, providing protection for both workers and the companies who employ them. Among other things, gloves have become a common protective item in the workplace. Particularly for workers who are dealing with high ...


    By Intersafety

  • Waste shredding protects resources in Indonesia - Case Study

    Cement production is among the core activities of building materials supplier Holcim. Holcim Ltd. can boast the most expansive geographical action radius in the global cements industry thanks to its subsidiaries in over 70 countries on all five continents. Recently, the company successfully inaugurated a modern recycling center in collaboration with its environmental technology partner Geocycle ...


    By WEIMA

  • Protective Eye Gear for Laser Viewing and Applications

    Some high-grade lasers can damage the eye and burn the skin. Most lasers that are capable of inflicting such injuries are categorized under Class 2, Class 3 and Class 4. For example, UV lasers that emit wavelengths between 180-400nm can cause corneal damage; while some near-IR lasers, ranging between 780-1,800nm, may burn one’s retina. On the extreme end of injuries related to ...


    By Larson Electronics LLC

  • Why You Want Articulated Concrete for Landfill Protection

    A good landfill is one that no one notices. It does not produce odors, contribute to erosion or divert storm water to undesirable locations. The municipality or private entity in charge of it has to make great efforts to keep it that way. One way to do that is by installing articulated concrete. This system of concrete blocks and wires offers landfill protection that is unlike previous options. ...

  • 9 Things Your Respiratory Protection Program Must Include

    Many think that getting a respirator fit test is all that is needed.  Unfortunately, it’s much more than that. The OSHA Respiratory Protection Standard 29 CFR 1910.134 has many requirements in addition to respirator fit testing. If respirators are worn by any employees, companies must have a written Respiratory Protection Program. The one exceptionis if the only respirators in use are ...


    By Atlantic Environmental, Inc.

  • Hearing protection - Hearing Awareness Week - 23rd to 29th August

    Who is responsible? Workplace/Occupational Health & Safety legislation in each State and Territory outline the responsibilities of individuals with regard to the management and control of Workplace Noise. Generally speaking the responsibility is placed on the owners of the workplace, the employer, and management of a particular site. Employees also have certain responsibilities. Employers and ...


    By Queensland Laboratory

  • Bespoke noise protection: AERZEN relies on the advantages of reactive silencers

    With reactive silencers, AERZEN reduces the noise emissions on the discharge side of its screw compressors, positive displacement blowers, and rotary lobe compressors. The innovative concept of these reactive silencers is superior to classic dissipative silencers in many respects. The sound waves developing on the discharge side of a Delta Screw compressor made by AERZEN can reach 170 to 190 dB. ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you