weir skimming unit Articles

  • Skimming Oily Wastewater

    As large generators of oily wastewater tighten effluent controls, the U.S. Environmental Protection Agency (EPA) is targeting smaller generators. Some of the firms receiving their attention are smaller manufacturing plants, automotive garages, mobile equipment service shops and truck farms. Many of these firms do not have access to a sanitary sewer system that will accept oily wastewater. Because ...


    By Abanaki Corporation

  • Oil Skimmer makes oil/water separator more efficient

    Industrial facilities depend on oil/water separators to separate oil from its waste water. While oil/water separators are a helpful component to a plant's wastewater system, oil/water separators traditionally do not provide an efficient method of removing oil once it has been separated from the waste stream. Traditionally, the separator industry has either used overflow skimmer pipes or weirs, or ...


    By Oil Skimmers, Inc.

  • Oil skimmer pays off for paper mill

    Skip Hogue is maintenance manager at St Joe Container Corporation, a paper mill and converter in College Park, GA that produces about 100 tons of corrugated boxes each day. Hogue noticed excessive oil in the wastewater discharge from boxboard operations. This oil comes from the rolls and bearings on the corrugating machines, and ends up in the plant's drainage system. Drainage water empties into ...


    By Abanaki Corporation

  • Monroe Parallel Plate Modules increase oils and solids removal in existing API Separator

    Challenge A silicone manufacturing plant was increasing capacity production and needed to increase the processing of the accompanying wastewater stream containing tramp oils and solids. If possible, the plant wanted to increase the efficiency and capacity of two existing 140,000-gallon API Separators to handle the additional wastewater. The plant required that the water be clean enough to ...

  • Oil/water separator and oil skimmer companies work together to help power generation facilities

    Power generation facilities depend on oil/water separators to separate oil from its waste water. While oil/water separators are a helpful component to a plant’s wastewater system, oil/water separators traditionally do not provide an efficient method of removing oil once it has been separated from the waste stream. Knowing what his customers were faced with, Dave Goding, president, Mercer ...


    By Oil Skimmers, Inc.

  • Quaker oats uses skimmer to reduce wastewater BOD

    The Quaker Oats plant in Peterborough, Ontario, Canada produces some seven million cases of Harvest Crunch® cereal and cake mixes annually. In the process, residue from the conveyors, dryers and other processing equipment ends up on the floor. Periodic equipment washdowns add water to the solid and liquid residue, which contains edible fats, starches and sugars. During house-cleaning operations, ...


    By Abanaki Corporation

  • Solving waste oil management and removal problems in power generating plants

    If your plant is like most, it is doing a good job of preventing oily water waste and waste oils from escaping into the environment. But at what cost? As labor resources dwindle, operating and maintaining drainage systems, oil separators, and sometimes inadequate oil removal equipment is expensive. Paying higher than needed costs for waste oil disposal, filtration and water treatment due to these ...


    By Oil Skimmers, Inc.

  • Skimmer technology - An appraisal of mop skimmer technology case study

    Skimmer technology offers many alternative types such as mop, disc, drum, brush, belt, tube or weir skimmers. 1.0 Background A World patent was awarded to Shell international in 1967, for the use of a continuous belt of material, synthetic or otherwise, which would remove oil from the surface of water, by means of adsorption or absorption. From that time until the ...

  • Inland diesel spill case study

    Introduction In January 2000 an oil spill occurred in the North of England. It was estimated up to 30,000 litres of diesel fuel had escaped the fuel storage tanks of a major factory due to a burst pipe. Fortunately most of the spilled oil found its way to a nearby drainage facility owned by the local Water Authority. Due to neglect the drainage outlet pipe that feeds ...

  • Balancing growth and conservation - Precast concrete manholes become part of the stormwater solution

    When American Fork, Utah, decided to approve construction of a 175-acre commercial center, the city engineers had to consider the environmental effect it would have on a 45-acre wetland right next door. Under the EPA´s Phase II Storm Water Rules, adapted in late 1999, almost any city large enough to require a storm sewer system must balance growth with the environmental impacts of ...


    By BaySaver Technologies, Inc.

  • Wastewater-Primary Treatment

    Primary Treatment is defined as a wastewater treatment process that takes place in a rectangular or circular tank and allows those substances in wastewater that readily settle or float to be separated from the water being treated. This process achieves solids separation. The solids readily available to settle to achieve sedimentation will do so in a settling tank referred as a clarifier. On the ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you