weld-fume filter Articles

  • Portable Weld Fume Collectors

    There are some important considerations when choosing a portable weld fume collector. First, airflow: Generally you need 900 to 1500 CFM for a small, portable unit to be an effective ventilation tool for welding operations. Second, filtration: There are a few critical elements to consider here. Make sure you have a spark ...


    By ProVent, LLC

  • No more complaints about welding fumes

    The challenge In 2003 Voortman Staalbouw moved to a new workshop of 140 m long x 22 m wide. During the design stage they took purchasing a welding fume filtration system into consideration. In view of the stringent environmental legislation and to meet the TLV values for welding fumes, Voortman strongly focused on ...


    By Plymovent Group BV

  • Control of Welding Fume Particulates Using Cleanable Filter Media: Hexavalent Chromium

    Herein, a Sentry Air Systems product study of hexavalent chromium particles, [Cr(VI)], is reported. Due to the popularity of extended life cleanable filter media and health concerns regarding hexavalent chromium exposure in the work place, Sentry Air Systems conducted a study of the efficacy of cleanable filter systems for the maintenance of safe breathing conditions during welding operations ...


    By Sentry Air Systems, Inc.

  • Fume control in large weld cells case study

    The Problem Tayco-Panelink is a Canadian based manufacturer of office furniture. Their customer base is worldwide. In 2001, DiversiTech installed a small fume extraction system which continues to do the job today. With this in mind, Tayco called on us to set up their new welding cell. Unfortunately, the welding fixtures were too large to accommodate a source capture system.   ...


    By DiversiTech

  • Flexible welding fume extraction system in plant

    The challenge VAM Drilling (Vallourec Mannesmann Oil & Gas Nederland BV) is located in Heerhugowaard, the Netherlands. This facility has been around for over 40 years. Approximately 20 employees are turning/welding in the plant on a daily basis. Sometimes even 24 hours a day, if projects need to meet certain ...


    By Plymovent Group BV

  • Custom welding booth and downdraft tables remove fumes in learning center

    Monoxivent partnered with S.J. Smith Co. to provide custom welding booths and downdraft tables to remove toxic welding fumes.  S.J. Smith is a regional welding distributor that actively promotes the Monoxivent product line. An international manufacturer wanted to construct a welding school in their facility where current employees could learn new technologies, as well as update skills. The ...


    By Monoxivent

  • Industrial Hygiene Report: Control of Hexavalent Chromium Welding Fume - Non-cleanable Filter Media

    Sentry Air Systems, Inc. manufactures equipment designed to capture  welding fume and/or other air contaminants and, after filtering, return the cleansed air to the local environment. For the purposes of this test, SAS wanted to determine the effectiveness of the Model 300 Welding Fume Extractor and filter media against Hexavalent Chromium fume commonly found during the welding of stainless ...


    By Sentry Air Systems, Inc.

  • TopAir`s Fume Hood

    TopAir, Statitech Israel’s flagship brand, manufactures a full line of superior cleanroom equipment including a reliable fume hood for neutralizing potential airborne chemical hazards in the laboratory. The fume hood mechanism offers maximum protection to laboratory staff working at a cleanroom table under the fume hood.   There are two basic types of fume hood. Many industries use a ...


    By TopAir Systems

  • TopAir’s Ductless Fume Hood

    TopAir is the flagship brand of Statitech Ltd., a leading developer, producer and marketer of a wide variety of standard and custom-made cleanroom products for the electronic, semi-conductor, medical and defense industries. Statitech has acquired a well earned reputation as a market leader in its field. Customers include the pharmaceutical giant Teva Industries Ltd., Israel Aircraft Industries ...


    By TopAir Systems

  • Expanding Reservoir Air Filters

    In all vented tanks, the rise and fall of fluid levels is offset by a corresponding volume of incoming and outgoing air. Keeping the incoming replacement air clean is essential for contamination control and thus the reliability of hydraulic systems. While targeting the system's reliability, JLM Systems Limited has developed the OilMiser™ Reservoir Aspirator (ORA) kit. This product represents a ...


    By JLM Systems Ltd

  • Clean and fume free environment for students

    The challenge A new facility was erected at the Vredenburg Campus (South Africa) in December 2008. Ventilation was not considered in the development stage of the facility and was, therefore, very poor with only natural air flow through open doors and windows and some ‘whirlybirds’ in the roof of the ...


    By Plymovent Group BV

  • Ducted or Ductless Fume Hoods? Is this the real issue?

    Most laboratories will need some form of fume cabinet at some point. The type of cabinet is usually the starting point of the process, and the choice of either ductless or ducted cabinet is made. With the ever increasing need to save money and to be environmentally responsible there are other considerations that need to be explored before a decision can be reached. ...


    By Camlab Limited

  • DownSpout StormFilter™ filter systems help galvanizing facility cut zinc by 87 percent

    Untitled Document Since 1967, San Diego Galvanizing has been hot-dipping structural steel, pipe and railings in zinc . Product applications include commercial and residential uses ranging ...


  • Healthy conditions in training centre

    The challenge CENFIM’s objective is to educate highly qualified and specialised employees for the metallurgical industry in Portugal. They organise courses of various durations and at various levels. The Portuguese metal industry counts approx. 19,000 companies, employing a total of 190,000 people. In the ...


    By Plymovent Group BV

  • Multiple arms improve work environment

    The challenge As a result of the annual review of G.C. Entreprise, Køge ApS' work environment, it was decided to obtain a new extraction system. The service workshop needed a high-quality extraction system to remove welding fumes, grinding dust and oil mist, preventing accumulation in the workshop. ...


    By Plymovent Group BV

  • Is Hexavalent Chromium (Hex Chrome; Chrome VI) a carcinogen?

    In 1990, the International Agency for Research on Cancer (IARC), an agency of the World Health Organization (WHO), published their findings on chromium and chromium compounds as carcinogens.  Chromium may be isolated in any of three volume states: Chrome 0 or metallic chromium; Chrome III called “Chrome 3” or Chrome VI called “Chrome 6,” also called hexavalent ...


    By Atlantic Environmental, Inc.

  • IRSST Studies Efficacy of N95 Respirators in Conditions Representative of Human Breathing

    On June 28, 2016, Institut de recherche Robert-Sauvé en santé et en sécurité du travail (IRSST) issued a press release announcing the availability of a study on “ ...


    By Bergeson & Campbell, P.C.

  • How Downdraft Tables Change Your Work Environment

    Working with metal and wood results in the release of harmful dust particles into the atmosphere, which is dangerous to the workers’ health. Continuous exposure to these particles means your employees will be breathing in the dust, which can lead to both short and long term health problems. In order to maintain the health and safety of your employees in the workplace, downdraft tables must ...


    By ProVent, LLC

  • The Function and Purpose of Portable Dust Collectors

    Portable dust collectors are movable devices that are useful to decrease and collect contaminant substances from the air in your work environment, producing units and plants. Portable dust collectors are small devices and portable, which means they can easily be transferred from place to place. Structure The ...


    By ProVent, LLC

  • Solid Waste Reduction: Insulform Pty Ltd

    Insulform Pty Ltd is a medium sized Melbourne based company that manufactures trim and insulation components for the automotive industry. Reformulation of the raw material and the process used to manufacture rear parcel shelves for passenger vehicles has resulted in significant cost savings, with reduced price to the customer, and the elimination of a significant solid waste stream. ...


Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you