welding air Articles

  • Welding Fumes and the effects of Manganese

    The potential risks of welding operations include the potential to breathe in metal fumes and toxic gases. Fume particles are formed from the vaporisation of molten metal that occurs during the process. These particles are very fine in size and may join together to form larger particles.. The biggest risk is exposure to the manganese contained in fumes that are given off during welding. ...


    By Shawcity Limited

  • Portable Weld Fume Collectors

    There are some important considerations when choosing a portable weld fume collector. First, airflow: Generally you need 900 to 1500 CFM for a small, portable unit to be an effective ventilation tool for welding operations. Second, filtration: There are a few critical elements to consider here. Make sure you have a spark ...


    By ProVent, LLC

  • Welding fume hazards

    Welding is tough work.  Not many who begin as welders retire as welders.  Eventually practically every welder develops cataracts.  Neck and back problems are also a foregone conclusion. There is also a long list of possible health problems depending on the type of welding.  Recently, the Occupational Health and Safety Administration (OSHA) identified hexavalent chromium as a ...

  • No more complaints about welding fumes

    The challenge In 2003 Voortman Staalbouw moved to a new workshop of 140 m long x 22 m wide. During the design stage they took purchasing a welding fume filtration system into consideration. In view of the stringent environmental legislation and to meet the TLV values for welding fumes, Voortman strongly focused on ...


    By Plymovent Group BV

  • Fume control in large weld cells case study

    The Problem Tayco-Panelink is a Canadian based manufacturer of office furniture. Their customer base is worldwide. In 2001, DiversiTech installed a small fume extraction system which continues to do the job today. With this in mind, Tayco called on us to set up their new welding cell. Unfortunately, the welding fixtures were too large to accommodate a source capture system.   ...


    By DiversiTech

  • Flexible welding fume extraction system in plant

    The challenge VAM Drilling (Vallourec Mannesmann Oil & Gas Nederland BV) is located in Heerhugowaard, the Netherlands. This facility has been around for over 40 years. Approximately 20 employees are turning/welding in the plant on a daily basis. Sometimes even 24 hours a day, if projects need to meet certain ...


    By Plymovent Group BV

  • Control of Welding Fume Particulates Using Cleanable Filter Media: Hexavalent Chromium

    Herein, a Sentry Air Systems product study of hexavalent chromium particles, [Cr(VI)], is reported. Due to the popularity of extended life cleanable filter media and health concerns regarding hexavalent chromium exposure in the work place, Sentry Air Systems conducted a study of the efficacy of cleanable filter systems for the maintenance of safe breathing conditions during welding operations ...


    By Sentry Air Systems, Inc.

  • Industrial Hygiene Report: Control of Hexavalent Chromium Welding Fume - Non-cleanable Filter Media

    Sentry Air Systems, Inc. manufactures equipment designed to capture  welding fume and/or other air contaminants and, after filtering, return the cleansed air to the local environment. For the purposes of this test, SAS wanted to determine the effectiveness of the Model 300 Welding Fume Extractor and filter media against Hexavalent Chromium fume commonly found during the welding of stainless ...


    By Sentry Air Systems, Inc.

  • A Breath of Fresh Air for Your

    As the full effect of the Federal Clean Air Act (CAA) Amendments continue to impact today’s industry, many companies will be required to install new or additional air pollution control equipment.  With over two decades of proven success, catalytic oxidation is a popular method for controlling volatile organic compound (VOC) emissions.During the past 25 years, industry has made progress in ...


    By The CMM Group, LLC

  • News on Air 2013, Volume 1: Products for Sampling

    For decades, Sigma-Aldrich has been a key supplier of innovative & high technology air monitoring products for various areas of gas/air sampling. Enclosed, you will find an overview on new and interesting devices to improve or simplify your air sampling. Supelco and Sigma-Aldrich offer a range of active and passive air sampling products, in addition to various analytical chemistry tools ...


    By Sigma-Aldrich Co., LLC

  • Air Pollution Control: Ready for the 21st Century

    The textile industry is plagued by air pollution problems which must be resolved. In particular, smoke and odor arising in the process require abatement. Air pollution control technology is available today which will serve the textile industry well into the 21st century. The nature of the problem The major air pollution problem in the textile industry occurs during the finishing stages, ...


  • Case History - Air Pollution Control in the Textile Industry: a Technology for the 21st Century

    The textile industry is plagued by air pollution problems which must be resolved. In particular, smoke and odor arising in the process require abatement. Air pollution control technology is available today which will serve the textile industry well into the 21st century. The nature of the problem The major air pollution problem in the textile industry occurs during the finishing stages, ...


  • Intraurban variability of Ambient PM Arsenic and other air toxics metals case study

    The Missouri Department of Natural Resources (MoDNR) and Washington University participated in a project to collect and analyze air toxics metals data. It was funded through a Community Air Toxics Grant from the U.S. Environmental Protection Agency (USEPA). The study grew out of the southside St. Louis Community Air Project (CAP) which identified six hazardous air pollutants of concern including ...


    By Cooper Environmental

  • Textile Industry: Air Pollution Control Through Wet Scrubbers, High Energy Venturi Scrubbers, Packed Bed Scrubbers and Other Technologies

    Wet Scrubbers, High Energy Venturi Scrubbers, Packed Bed Scrubbers are an excellent solution for air pollution in the textile industry. The textile industry is plagued by air pollution problems which must be resolved. In particular, smoke and odor arising in the process require abatement. Air pollution control technology is available today which will serve the textile industry well ...


    By CR Clean Air Group, LLC

  • TPHEnhanced pilot study - residual petroleum remediation various fuel oils (JP, JP4, No 2) searsport pipeline pump station argyle, maine: former Loring Air Force Base case study

    Project Highlights TPHENHANCED proven to expedite biodegradation of saturated soil/groundwater PHC contaminants, anaerobically TPHENHANCED facilitated >83% reduction in total [TPH] over 13-week evaluation period. TPHENHANCED proven Green and sustainable strategy, minimizing environmental impact and remedial costs. TPHENHANCED cost-effective site ...

  • Winter comes – and heating costs will increase

    Winter is coming, once again, and the rising heating costs are starting to eat away your bottom line. In working areas with a high roof, such as welding halls and warehouses, warm air rising towards the ceiling will form a hot air cushion under the ceiling. Genano 1000 which effectively purifies the air in welding halls, also equalizes the temperature in these kind ...


    By Genano Solutions

  • Clean and fume free environment for students

    The challenge A new facility was erected at the Vredenburg Campus (South Africa) in December 2008. Ventilation was not considered in the development stage of the facility and was, therefore, very poor with only natural air flow through open doors and windows and some ‘whirlybirds’ in the roof of the ...


    By Plymovent Group BV

  • Forensic engineering applied to the analysis of a gas explosion in a residential building

    Present paper deals with the identification of the cause of an explosion in a hollow space positioned below a residential building as the result of welding operations. On field investigation clearly demonstrated that the explosion was due to the ignition of a flammable atmosphere in the basement of the building. Along the trial two hypotheses were brought to the judge: (a) explosion of an ...


    By Inderscience Publishers

  • Health and safety at work

    The challenge The production activities of equipment such as cooling towers, condensers and cooling installations in aid of air conditioning systems require a lot of metalworking and welding. Baltimore Aircoil concluded for itself that the extraction of welding fumes and hazardous gases in the production halls could be ...


    By Plymovent Group BV

  • Healthy conditions in training centre

    The challenge CENFIM’s objective is to educate highly qualified and specialised employees for the metallurgical industry in Portugal. They organise courses of various durations and at various levels. The Portuguese metal industry counts approx. 19,000 companies, employing a total of 190,000 people. In the ...


    By Plymovent Group BV

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you