welding fume control system manufacturer Articles

  • Welding Fumes and the effects of Manganese

    The potential risks of welding operations include the potential to breathe in metal fumes and toxic gases. Fume particles are formed from the vaporisation of molten metal that occurs during the process. These particles are very fine in size and may join together to form larger particles.. The biggest risk is exposure to the manganese contained in fumes that are given off during welding. ...


    By Shawcity Limited

  • Fume control in large weld cells case study

    The Problem Tayco-Panelink is a Canadian based manufacturer of office furniture. Their customer base is worldwide. In 2001, DiversiTech installed a small fume extraction system which continues to do the job today. With this in mind, Tayco called on us to set up their new welding cell. Unfortunately, the welding fixtures were too large to accommodate a source capture system.   ...


    By DiversiTech

  • Industrial Hygiene Report: Control of Hexavalent Chromium Welding Fume - Non-cleanable Filter Media

    Sentry Air Systems, Inc. manufactures equipment designed to capture  welding fume and/or other air contaminants and, after filtering, return the cleansed air to the local environment. For the purposes of this test, SAS wanted to determine the effectiveness of the Model 300 Welding Fume Extractor and filter media against Hexavalent Chromium fume commonly found during the welding of stainless ...


    By Sentry Air Systems, Inc.

  • Clean and fume free environment for students

    The challenge A new facility was erected at the Vredenburg Campus (South Africa) in December 2008. Ventilation was not considered in the development stage of the facility and was, therefore, very poor with only natural air flow through open doors and windows and some ‘whirlybirds’ in the roof of the ...


    By Plymovent Group BV

  • Wyman Gordon Case Study

    Wyman-Gordon is a world class materials company with nearly 200 years of metals engineering experience. They are the acknowledged leader in the production of high-quality closed-die forgings and extrusions for the most critical applications. Markets served include those for commercial and military aircraft; gas turbine engines; oil and gas exploration; land based gas turbine and power generation; ...


    By Mech-Chem Associates, Inc.

  • A Breath of Fresh Air for Your

    As the full effect of the Federal Clean Air Act (CAA) Amendments continue to impact today’s industry, many companies will be required to install new or additional air pollution control equipment.  With over two decades of proven success, catalytic oxidation is a popular method for controlling volatile organic compound (VOC) emissions.During the past 25 years, industry has made progress in ...


    By The CMM Group, LLC

  • Gas Safety in Confined Spaces

    Introduction An offshore worker ensures a vessel is safe to enter; a plant manager enters a small plant room; a contractor inspects the lining of a sewage pipe.  All these personnel face common dangers, despite working in widely different industries.  Gas-related injury poses a serious threat in any confined space where the free movement of air is limited. A confined space ...

  • The invisible fine dust

    Air is lifeblood. Daily we inhale approximately 15.000 liter. Still, the air contains invisible pollutants, which vary in its composition and concentration depending on the location. Especially the respirable particles with a diameter of less than 2.5 µm (PM 2.5) were considered to be particularly dangerous. According to a current study conducted by the Max Planck Society, ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you