welding protection Articles

  • Portable Weld Fume Collectors

    There are some important considerations when choosing a portable weld fume collector. First, airflow: Generally you need 900 to 1500 CFM for a small, portable unit to be an effective ventilation tool for welding operations. Second, filtration: There are a few critical elements to consider here. Make sure you have a spark ...


    By ProVent, LLC

  • Welding Fumes and the effects of Manganese

    The potential risks of welding operations include the potential to breathe in metal fumes and toxic gases. Fume particles are formed from the vaporisation of molten metal that occurs during the process. These particles are very fine in size and may join together to form larger particles.. The biggest risk is exposure to the manganese contained in fumes that are given off during welding. ...


    By Shawcity Limited

  • Welding fume hazards

    Welding is tough work.  Not many who begin as welders retire as welders.  Eventually practically every welder develops cataracts.  Neck and back problems are also a foregone conclusion. There is also a long list of possible health problems depending on the type of welding.  Recently, the Occupational Health and Safety Administration (OSHA) identified hexavalent chromium as a ...

  • Protective coatings for industrial fans

    Industrial fans Large fans are commonly used to provide significant quantities of air needed for operating industrial processes. Coal and lignite fired power plants, cement, metal or woodchip manufacturing are just a few examples of industries that require homogeneous and reliable airflows. When particles are present in the air stream, they relentlessly wearout the fan surfaces. This wear ...


    By Castolin Eutectic

  • Monitoring gas mixtures in Weld Overlay Cladding production - Case Study

    Arc Energy utilise the 542 binary gas analyser to monitor the mixture of gases in their weld overlay process. Arc Energy Resources was started by European Welding Engineer, Alan Robinson in 1994. Since then they have become a worldwide contractor of weld overlay clad products and services. Arc Energy’s weld overlay cladding provides heavy duty protection against corrosion and ...


    By Systech Instruments Ltd

  • ERGELIT tape - impact protection for pipes

    The ERGELIT tape – a safe protection for steel, cast iron, cement and plastic pipes! Processing: Put the tape into water, surplus water express and put the tape around the piping immediately. Render the withdrawing ERGELIT mortar. A further subsequent treatment is not necessary any longer. After approx. 1 hour a sufficient strength is achieved. Due to the ...


    By HERMES Technologie Ltd.

  • The Revised Personal Protective Equipment Standards for General Industry

     Over the years, the OSHA Standard regarding personal protective equipment has changed as times have changed. Most recently, in the early 1990's, OSHA conducted a comprehensive review of their Personal Protective Equipment Standard for General Industry. That study showed that the practices set forth in the existing regulation were outdated, and that they focused primarily on workplace issues ...


  • CDP wearplate: Wear Protection Solution for Flaker Aspiration Cyclone

    A leading producer of canola-based products trusted the CastoLab division of Eutectic Canada to manufacture two new flaker aspiration cyclones made out of CDP wearplate. The OEM parts made out of standard steel, were unable to resist the high intensity production environment and showed early signs of erosion and abrasion after only one year of service. Our CastoLab Services solution was to ...


    By Castolin Eutectic

  • CDP® wearplate: Wear Protection Solution for Flaker Aspiration Cyclone-

    A leading producer of canola-based products trusted the CastoLab® division of Eutectic Canada to manufacture two new flaker aspiration cyclones made out of CDP® wearplate. The OEM parts made out of standard steel, were unable to resist the high intensity production environment and showed early signs of erosion and abrasion after only one year of service. Our CastoLab® Services ...


    By Castolin Eutectic

  • DHL logistics campus ground water protection case study

    When the massive logistics campus in Unna begins operations in the near future, it will change the face of the region. Approx. 350 people will be working in the massive 90,000 square meter hall helping two million pallets annually get to their proper destination. The facility requires proper safeguards especially with regards to chemical materials. The leading international logistics company DHL ...


    By NAUE GmbH & Co.KG

  • Superior voc protection for project situated on former railroad site case study

    Project: Smith Performing Arts Center Location: Las Vegas, NV Products: Liquid Boot Gas Vapor Mitigation System, GeoVent™ Gas Venting System, Ultraseal Waterproofing System Background: Vapor intrusion has become a significant environmental issue for regulators, industry leaders, and concerned residents nationwide. The ...


    By CETCO

  • Nitrogen Dioxide Testing in Indoor Environments Protects Human Health

    During the winter months, when homes and businesses typically have their windows and doors closed, can result in an increase in indoor air quality (IAQ) complaints.  In addition to a lack of fresh air in many buildings during this time, problems due to gases not properly vented from heaters frequently occur.   Nitrogen oxides can be of increased concern during these cold winter ...

  • Gold mine cover structure improves environmental protection while increasing worker safety case study

    Located in northern Ontario, near the Town of Cochrane, Detour Lake has more than 15 million ounces of gold in reserves and an expected annual production of over 650,000 ounces. Detour Gold Corporation, a Canadian gold exploration and development company, is the developer. Detour Lake is on track to becoming Canada’s largest operating gold mine. Constructing a cover structure for their ...


    By CST Industries Inc

  • Costs and Benefits of Geomembrane Liner Installation CQA

    ABSTRACT Because the cost of third-party construction quality assurance (CQA) of geomembrane liner installations is typically comparable to the cost of the geomembrane liner, CQA must be optimized to obtain the most benefit for the owner, rate payers, and environment. A regulation-based CQA protocol usually includes testing the material, observing the quality control (QC) program of the ...

  • Uxbridge Case Study

    The site occupied a total plan area of 0.4 hectares and was situated approximately 1 Km south of Uxbridge town centre. Historically, the site functioned as a car dealership, vehicle maintenance and MOT companies, a welding shop and a tyre fi tter from which various contamination issues had arisen. Site Investigations revealed a ‘hotspot’ ofcontaminated soil towards the centre of the site with ...


  • Five Critical Parts For Your Steel Storage Tank

    Every year, we sell hundreds of parts for bolted tanks and welded steel tanks. Even though many ground storage tanks needing parts were not originally manufactured by Superior Tank Co., Inc., we can provide standard replacement components for steel storage tanks or can fabricate custom parts and accessories to ...


    By Superior Tank Co., Inc.

  • Wetlands

    Location: New Orleans, Louisiana Units: Delta 3312 and Concertainer 4315 Project: University of New Orleans Coastal Restoration Project HESCO Bastion Environmental's innovative shoreline restoration products are a proven success. Our newest product, the HESCO Delta unit, offers unique advantages in low, medium and high energy coastal environments, enabling effective and economical shoreline ...


    By HESCO Bastion, Inc.

  • Practical inputs for maturity model of sliding mode control concepts in power electronics domain

    Sliding mode control (SMC) idea has steadily remained a busy research area for more than half a century. Its market penetration in industrial products is, however, below expected line. A control idea, for its mass market penetration needs to meet, apart from control objective, multi–objective criteria ranging from its simple implementation procedure, meeting energy efficiency, cost, weight, etc. ...


    By Inderscience Publishers

  • £16 million refurbishment of London Bridge Station

    Main Contractor: Costain  Groundworks: Substructure Protection Systems London Bridge Station Work at London Bridge railway station is part of the Government-sponsored Thameslink Programme. With completion scheduled before the end of 2018, the station will have more ...

  • Clemson road bridge case study

    Background The South Carolina Department of Transportation (SCDOT) needed to provide a right-of-way for an access road adjacent to a CSX Railroad line. The proposed Clemson Road Bridge overpass was a challenging project and SCDOT had three choices: Option 1: Construct a 1H:1V Reinforced Soil Slope (RSS) at the northern bridge abutment. Option 2: Lengthen the northern ...


    By Strata Systems, Inc.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you