well drilling system Articles

  • Raw material cycle: from chip to briquette to product - Case Study

    Thanks to their briquetting system from RUF Frischhut can redeploy production scrap and melt it again Ludwig Frischhut GmbH and Co. KG have closed the circle on their raw material cycle by utilising a briquetting press from RUF: cast chips produced during the machining of parts for water supply and sewage disposal are pressed to solid briquettes and then melted in the in-house foundry and ...

  • Evaluation of a Horizontal Well

    Background: Air Sparging Air sparging is an in-situ remediation technology where air is injected into the saturated zone of an aquifer. It is an alternative to conventional ex-situ pump and treat systems for remediation of contaminated ground water. It is necessary to understand the pattern of air flow that will occur in the subsurface in order to determine the optimal placement, ...

  • The “Straight Skinny” on bentonite-based drilling muds & their standard practice use in the horizontal remediation well industry

    Let’s make our point up front: 1) bentonite-based drilling fluid is NOT bad for horizontal remediation well (HRW) projects; 2) it does not damage the formation; 3) it is a naturally occurring clay material that is mined; and 4) it does flush easily/adequately during well development. Most remediation professionals have designed and/or installed vertical wells at one time or another ...

  • Solids Control for Drilling Mud Process System

    Nowadays, more and more drilling contractors recognize solids control’s importance to oil and gas drilling, HDD, CSM/CBM exploration, etc. How does solid control affect well drilling? Please find the following details. Cost Comparison of Two Oil Well Drilling Let’s find the difference of two kinds of oil well drilling with and without solids control system. Final effect or result is ...


  • How to Deal with Drilling Waste

    At present, environmental protection is a basic state policy in China, and it has been a strategic mission and goal for our country to maintain a sustainable development of society, economy and environment. Along with the continuous improvement of environmental laws and the increasing environmental awareness among people, the departments concerned have successively enacted various environmental ...


  • Modeling geothermal wells using SVHeat and SVFlux

    Numerical modeling of geothermal processes has received increased attention in recent years. The process of installing geothermal heating systems in residential homes and cottages is one application of numerical models. These systems typically involve drilling between one and three wells on a particular property. Heat exchangers then act as a pump and remove heat from the ground in order to heat ...


    By SoilVision Systems Ltd.

  • Horizontal Directional Drilling - A Green and Sustainable Remediation Remedy

    Interest in using sustainable practices and technologies for environmental cleanup has increased notably within the past few years. The US EPA and many states have published recommended practices to reduce the environmental footprint of cleanup operations, and many consultants and contractors are attempting to “go green” in contaminated site remediation. It makes sense to conserve ...

  • The purpose of using drilling shale shaker in oilfield

    The purpose of using drilling shale shaker is to remove the large cuttings in drilling fluid. Each set of solids control system must be equipped with a sufficient number of shale shaker to ensue the 100% processing rate of drilling fluid circulation. Shale shaker is the first solids control equipment to process and adjust the drilling fluid, ...


  • A new approach to drilling waste management – prevention!

    Grangemouth based Surface Active Solutions (SAS) has developed its microemulsion based technology to aid the prevention and management of drilling waste. The many activities surrounding the removal of drilling mud in surface and downhole cleaning applications usually generate significant volumes of oil contaminated drilling waste. The drilling mud is typically removed through the use of solvents ...

  • What`s at Stake: The debate over Arctic Drilling

    Royal Dutch Shell is planning to park two massive Arctic oil drilling rigs in Seattle's waterfront before they head north - but the petrochemical giant will first have to get around protesters in kayaks and others who want to thwart the new frontier in oil exploration and spark a national debate about fossil fuels and climate change. Here's a look at the debate over Shell's plans to drill in the ...


    By Associated Press

  • Degassing Refrigerators - Drill-head and Piercing-plier

    1. For what purpose do we have to degas a refrigerator? A refrigerator has to be disposed as hazardous waste. The refrigerants inside a hazardous refrigerator are harmful for the environment (ozone depleting and greenhouse effect). Most common refrigerants are; R12, R134a and R600a. The uncommon is the removal of NH3. Refrigerants are developed to dissolve very easily into ...


    By ATN Engineering B.V.

  • Equipment List for full solids manage & drilling waste

    Solids Handle & drilling waste management are pretty important for drilling contractor. If they manage this division well, they can save lots of money on drilling mud / drilling chemicals, also they can be environmental friendly. There is much equipment needed for solids control & drilling waste ...


  • Maintenance of Oilfield Drilling Mud Decanter Centrifuge

    Decanter centrifuge is widely used in drilling mud separation to separate smaller solid particles after the equipment processing such as drilling mud shale shaker and drilling fluids mud cleaner or desander and desilter. Usually, decanter centrifuge is equipped with screw pumps or slurry pumps to feed drilling mud to ...


  • Contracting a methane gas extraction system: Engineering and installing extraction wells requires expertise Here’s what these specialty contractors do

    Of the three typical ways of removing methane from landfills — venting, burning, and extraction — only the latter properly disposes of the potentially hazardous gas and offers the option of selling it as fuel. Over the last two decades, 594 U.S. gas-to-energy ...


    By Griffin Dewatering

  • Case Study - Multilevel well system improved understanding of groundwater conditions in deep aquifers

    Westbay System delivered detailed data in less time and at a reduced cost CHALLENGE Characterizing the plume in a shallow  aquifer is simple, but investigating deeper  aquifers poses several challenges. SOLUTION MACTEC evaluated various monitoring  technologies and determined that  Westbay System modular ...


  • Horizontal Remediation Wells used in order to preserve military security

    Project Description: Remediate a plume of trichloroethylene (TCE) under multiple military buildings by air sparging (AS) and soil vapor extraction (SVE). There are two target zones: the shallow zone is approximately 70' below grounds surface (bgs) and 20' below this is the deep zone. The plume was located under multiple buildings comprising an area of approximately 150,000 SF. Scope of Work: ...

  • Acoustiblok® Quiets Well Motor Noise for California Water District

    Acoustiblok recently resolved a noisy well motor issue that was affecting some nearby residents for Three Valleys Municipal Water District (Three Valleys MWD) in California. Ben Peralta, a Three Valleys MWD engineer working on the project said, “The new Acoustiblok All Weather Sound Panels perform better than the old ...


    By Acoustiblok International

  • Customized Drilling Waste Hi-G Dryer Shipped to North Africa

    Along with large scale application of KOSUN drilling waste management equipment in North Africa market, establishment of two after-sales service centers respectively in Egypt and Algeria and four-year strategic cooperation with a local partner, KOSUN drilling waste management equipment has been well accepted by customers in North Africa. Now there are 12 KOSUN ...


  • Top Water/ Borehole Drilling Companies in Uganda (East Africa)

    Rural water being a source for health, an essential nutrient and a building block for peoples’ lives in local communities cannot be sustained without external support in form of boreholes as they are the ‘surefire’ answer to providing fresh water in rural communities. A borehole is simply a deep-hole or a shaft sunk into the earth purposed ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you