well inspection system Articles

  • How a contract research lab advanced its polymer characterization capabilities

    Realizing the Advantages of Ultra-High-Performance Size Exclusion Chromatography Compared to GPC Intertek is a global provider of quality and safety services designed to help businesses improve products, assets and processes, overcome market constraints and reduce risks. From auditing and inspection, to testing, training, and certification, Intertek enables customers to meet end ...


    By Waters Corporation

  • Oil Sampling Best Practices (Part 2)

    Understanding Dynamic Particle Equilibrium in Closed Loop Systems Dynamic Equilibrium Condition (DEC) is defined as a steady state condition where the normal wear rate in a machine results in no net gain or loss of particles. ...


    By Spectro Scientific

  • 10 Reasons why you should continuously monitor low temperature and liquid chemical sterilants for worker safety

    1. Sterilant chemicals are highly toxic Low temperature and liquid chemical sterilants are designed to kill all microorganisms including resistant spores and if they were not toxic, they would not be effective in sufficiently high concentration to destroy all microbial life including the chemically resistant sporicidal forms of certain ...


    By ChemDAQ, Inc.

  • ALBANISA Oil Spill Equipment Setup - Case Study

    As a part of the Bolivarian Alliance for the People of Our America (acronym in Spanish: ALBA), Nicaragua has received funds to build a new oil hub in the Caribbean. The hub will be available for oil companies in order to store their products before reaching its final destination. By doing that the profit will be increased as the costs for transportion is reduced. The updated environmental ...


    By DESMI A/S

  • Element Inspection Criteria for Couplings

    Baldor-Dodge Raptor’s easy to assemble, patent-pending split rubber element significantly decreases total cost of ownership and extends driven equipment life. Designed for drop-in interchangeability, the Raptor offers easy installation and reduced maintenance in an innovative design. When it is time to inspect or maintenance the coupling, it is important to know what to look for so elements ...


    By Modern Pumping Today

  • Drones for Wind Turbine Inspection

    Unmanned Aerial Vehicles and Inspection Services for Wind Turbines: Global Market Assessment and Forecasts By the beginning of 2015, there were nearly 270,000 individual wind turbines operating globally. The more than 800,000 blades spinning on these turbines are battered by the elements over time and gradually wear out. Deterioration can cause reduced energy ...

  • How To Survive An OSHA Inspection

    Untitled Document While there's little upside to facing an Occupational Safety and Health Administration (OSHA) inspection, it is possible to ...


    By 3E Company

  • Aircraft Engine Remote Visual Inspection

    An aircraft MRO center was in need of an easy to use borescope for use in a wide variety of applications on both turbine and piston powered aircraft. The VJ-Advance (VJ-ADV) from RF System Lab was selected because of its unique combination of features and very competitive price. Using the VJ-ADV, technicians are now able to conduct engine and airframe inspections quickly and easily, documenting ...


    By RF System Lab.

  • Not Had Your Inspection Yet? Be Prepared!

    The CQC Notification We had our CQC inspection this week and if it hadn’t have been for the fact that we were notified of the visit the day before we were to move to a new clinical computer system (SystmOne) we might not have felt quite so anxious about our impending visit! Whilst everything we do is in preparation for an inspection there’s nothing like a deadline to ...

  • It’s Time to Prepare for an OSHA PSM Inspection

    Companies who are required to comply with OSHA’s Process Safety Management standard (1910:119) should be on high alert now that inspectors are being encouraged to complete more time-consuming, complex investigations. The reason? OSHA’s new enforcement weighting ...


    By Intelex Technologies Inc.

  • Inspection of Internal Structure of Walls by Subsurface Radar

    ABSTRACT This paper deals with the application of ultra-wide band time-domain subsurface radars, equipped with special signal processing techniques, to realize non-invasive image testing of the building walls' internal structure that are made with brick, stone, concrete, reinforced concrete and other construction materials. There are two normally associated problems, qualitative and ...


    By Transient Technologies LLC

  • Case study - City of Rockville - Robotic Pipeline Inspection

    Service: PureRobotics - Robotic Pipeline Inspection Client: City of Rockville Project Date: July 2010 Type of Pipeline: Water Transmission Main Diameter: 24-inch Pipe Material: PCCP Length: 53,000 feet Results: 3 pipe sections identified at risk Insertion of Pipeline Inspection Robot Pure Technologies (Pure) was contracted to provide robotic pipeline inspection ...


    By Pure Technologies

  • Dam Inspection: A Day at Still Creek Dam

    We’ve been busy lately visiting various municipalities, police forces, aquaculture sites, and water treatment plants showcasing both our portable ROV systems and our new product line, the DT340 Pipe Crawler. One project in particular, took place at the Still Creek Dam in Tamaqua, PA. Cody and Sam packed up the crawler and headed down ...


    By Deep Trekker Inc.

  • Equipment deficiencies: How well are they being managed? (Part 1 of 2)

    A key element of a successful mechanical integrity (MI) program is the equipment deficiency process. In addition to being a requirement and an MI emphasis area in many OSHA National Emphasis Program inspections, a facility’s equipment deficiency process is a vital management system for ensuring safe process operations. This process helps ensure that deficient equipment conditions are identified ...


    By ABS Consulting

  • ZF has improved pump production with an Equator gauging system - compact, rugged and able to inspect - Case Study

    ZF Marine in Padua, Italy, a manufacturer of pumps for marine propulsion systems, was looking for faster process control, with greater measurement capability. “We realised that it was possible to save time,” explains Gerardo Matterazzo, Quality Manager at ZF, “but we had to identify the right tool. With the Equator process control system from Renishaw, we found a gauging machine ...


    By Renishaw plc

  • Handling Bulk Foods? Inspecting Them Can Save You Money

    A new white paper from Mettler-Toledo explains how bulk food inspection systems can protect consumers and minimise the risk of expensive product recalls by eliminating physical contaminants. Bulk food product inspection systems are specifically designed to inspect a wide range of loose, bulk foods at various stages of the production process. Despite frequently inspecting loose ...


    By Mettler - Toledo Int. Inc

  • Underground Water Tanks: Understanding the installation process is the first step in safety inspections

    Underground storage tanks are increasingly becoming essential components of building projects, driven by rising interest in on-site rainwater and graywater collection and reuse. As a result, building officials may need to expand their expertise to include these products and their components. Some safety inspection work is obvious; for instance, checking that the installer or project owner ...


    By Xerxes Corporation

  • Crawler Size: The Right Investment for the Right Pipeline Inspection Application

    As with any maturing technology, the inspection crawler market has evolved from a handful of basic models to a vast array of configurations, each uniquely adapted for nearly any pipeline inspection application.For buyers, this can also be a double-edged sword since finding the right crawler among the myriad of choices can require research, forethought, and inevitably some compromise. So, here are ...


    By Envirosight LLC

  • With fit-for-purpose CMM fixturing we save 50% of the inspection time - Case Study

    Yeovil Precision Castings (YPC) Limited manufactures production quantities of high-quality investment castings in air and vacuum. It supplies to customers in aerospace, medical, power generation, vehicle components, safety equipment, railway and general engineering. To meet its customer demand for more thorough batch sampling, the company has invested in two DCC co-ordinate measuring ...


    By Renishaw plc

  • How to Survive An EPA Clean Air Act Title VI Refrigerant Regulations Compliance Inspection

    Part 1: Prior To An Inspection EPA fines and penalties for violations of Clean Air Act (CAA) ...


    By IHS

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you