well management Articles

  • Waste management and well-being

    There was the Industrial Revolution in Europe, followed by the Automobile Revolution in the early-to-mid 20th century. The Green and White ones followed after that in the Asian countries. The IT and telecom revolution has transformed lifestyles in the last two decades. After having nourished ourselves with the bounties of Mother Earth, it is time to give back, be grateful and conserve the ‘Gaia’ ...


  • Old container, new station: WS600 part of air quality measurement system in Kutaisi

    An AQM station including a Lufft WS600 all-in-one weather sensor was installed by our local system integrator ELKO LLC in Kutaisi, Georgia in May 2017. It was mounted on an existing measurement container provided by the customer LEPL National Environmental Agency. The system consists of a Fidas® 200 fine dust monitor and immission measurement system detecting PM2.5 and PM10 particles ...

  • What The AD Industry Can Learn From Solar Standardization

    Applying a proven project finance model to the anaerobic digestion industry is the best way to ensure projects get built and operate profitably over the long-term. THE U.S. anaerobic digestion (AD) market represents an attractive, multibillion dollar investment opportunity. However, structural industry obstacles must be overcome before the market can realize its full potential. As a ...


    By BioCycle Magazine

  • `Standards are desperately needed for plastic and pesticide contamination in soil´

    In addition to plastic in the oceans, plastic contamination in arable land throughout Europe and other parts of the world is a growing problem. No standards exist for these types of soil pollutants, nor for pesticide residues or their degradation products. For this reason, Professor Violette Geissen is calling for standards to be implemented. On 15 June, Geissen will deliver her inaugural address ...

  • Customer Testimonial: BE&K Building Group for US Pharmaceutical Install

    At Catalytic Products International (CPI), each project we work with is different. Regardless of the differences, we use our experience and expertise to work with all our end users and their engineering / construction / environmental partners to ensure they are addressing their air pollution control needs as efficiently and cost-effectively as possible. We want to share those stories through ...

  • Water Treatment Optimization - Case Study

    Drinking water treatment in North America has stringent requirements for effluent water quality, with a great amount of attention being drawn to the presence of hazardous disinfection by-products (DBPs) persisting through water distribution systems. The operation of water treatment plants involves addition of various mixing agents to help with coagulation and settling of organics in the raw water ...


    By MANTECH

  • Hazardous waste and not, Baioni-Dicatech system

    The identification, characterization and restoration of contaminated areas now represent a big environmental issue, both at European and national level. In the major industrialized countries the issue of contaminated land has come out in all its gravity in the late seventies when, against a widespread awakening of environmental consciousness, important pollutions events emerged. Consequently, in ...


    By Baioni Crushing Plants Spa

  • Innovative Project for Hydrocarbons Contamination

    Baioni Crushing Plants, leader in the aggregate crushing sector has been operating for 40 years, have recently developed equipment and methods for environmental control. Several plants have already been supplied to third parties, now Baioni have full know-how of the technology and can ensure correct conception of the line based on the specifications of the soil to reclaim and can provide ...


    By Baioni Crushing Plants Spa

  • Data Centre CRAC unit efficiency improvements

    One of the main types of project Munters look at is energy efficiency improvements within the thermal management side. One of the easiest changes that can be made is swapping out the old AC powered motors for EC powered impellors. the reductions in energy is considerable, with some older belt drive unit changes measuring a saving of over 60% this is due to the design of the new impellors and the ...


    By Munters

  • ECSMGE CONFERENCE 2015: Managing the Clogging of Groundwater Wells

    This is the poster or summary of a paper being presented at the XVI ECSMGE  - European Conference on Soil Mechanics & Geotechnical Engineering - in Edinburgh from 13th to 17th September 2015. Groundwater wells are common to many civil engineering projects and their operational performance can play a crucial role. The wells may be part of a construction dewatering system, ...


    By Geoquip Water Solutions

  • Abandoned Wells and Mines as Underground Storage for Waste Management

    Abstract Albania is a rich country in oil, mineral and water sources as well as a very polluted one in Europe There are a lot of wastes that couldn’t be managed in existing circumstances. At the present many oil and gas fields are in the third or depleted phase of the exploitation, while a lot of mines are abandoned. In this frame the paper presents some considerations to use them as underground ...


  • Always well-informed, and now mobile as well

    AERZEN’s corporate websites are being upgraded: Since May 2016, www.aerzen.com has been online with a lot of new content and functionality. Upgrades will take place to the websites of all AERZEN subsidiaries worldwide over the course of 2016. The new AERZEN website impresses with a high degree of transparency, user friendliness and service capability, which exactly represents the image ...

  • Well Identification and Environmental Management, A Lesson in Standards and Data Management

    This powerpoint, Well Identification and Environmental Management, A Lesson in Standards and Data Management, was given by Keith Fraley from Shell Exploration and Production at the ESRI Petroleum User Group Conference in February 2008. It describes an approach for collection and storage of hydrology sampling event results for a project consisting of about 600 wells and 400,000 analytical results. ...


    By EarthSoft, Inc

  • Doing Well by Doing Good

    'Doing Well by Doing Good' is more than a feel good byproduct of a company's corporate social responsibility endeavours. It is a fundamental business precept that lies at the core of sound management practice. Finding creative business solutions to address any of the pressing social or economic problems of today's increasingly complex world is as important to the overall bottom line performance ...


    By GLOBE Foundation

  • Regional modeling of wells

    The ability to represent wells in a regional three-dimensional numerical groundwater model is crucial for many modeling exercises. Such wells can either be measurement wells where groundwater levels are measured as a function of time, or wells can be pumping wells in which water is removed from the well and a drawdown cone is created in the water table surrounding the well. There are numerical ...


  • Think health as well as safety

    Lee Calver of Workplace Law writes about how the HSE is making sure that the construction industry ‘thinks health’ as well as safety’. Not many weeks pass without the Health and Safety Executive (HSE) releasing new research or detailing ...


    By Altius Vendor Assessment Ltd

  • Managing effective workforce well-being programmes across your organisation

    Introduction The commitment to well-being is a challenge for global business leaders, who see workplace well-being as one of the most pressing challenges to their future growth and profitability. Well-being is increasingly considered a core focus for companies to unlock value across workforces and supply chains. Corporate well-being programmes are increasingly designed with a ...


    By Rivo Software Ltd.

  • Equipment deficiencies: How well are they being managed? (Part 1 of 2)

    A key element of a successful mechanical integrity (MI) program is the equipment deficiency process. In addition to being a requirement and an MI emphasis area in many OSHA National Emphasis Program inspections, a facility’s equipment deficiency process is a vital management system for ensuring safe process operations. This process helps ensure that deficient equipment conditions are identified ...


    By ABS Consulting

  • Managing effective workforce well-being programs across your organization

    Introduction The commitment to well-being is a challenge for global business leaders, who see workplace well-being as one of the most pressing challenges to their future growth and profitability. Well-being is increasingly considered a core focus for companies to unlock value across workforces and supply chains. Corporate well-being programs are increasingly designed with a ...


    By Rivo Software Ltd.

  • Equipment deficiencies: How well are they being managed? (Part 2 of 2)

    As introduced in part one, a key element of a successful mechanical integrity (MI) program is the equipment deficiency process that ensures deficient equipment conditions are identified in a timely manner and appropriately managed until they are corrected. Part two discusses the common struggles related to managing deficiencies and how involving appropriate levels of management can provide ...


    By ABS Consulting

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you