wet dust collector Articles

  • Wet Dust Collectors: Options and Operations

    A wet dust collector comes in the choice of three variations and these are: gas/liquid contact, gas/liquid separation and gas humidification. The difference between the three is based on how the dust is collected and separated inside the system. A wet dust collector, also known as a wet scrubber, ...


    By ProVent, LLC

  • What Do Wet Dust Collectors Do?

    Wet dust collectors are ideal for many operations, which include scrubbing, washing, and obscuring the pollutant out of the air and collecting it as a wet slush. Wet dust collectors come in various shapes and sizes, which mean you will always have a wide range to browse through, before you treat your business to this ...


    By ProVent, LLC

  • What Do Wet Dust Collectors Do?

    Wet dust collectors are ideal for many operations, which include scrubbing, washing, and obscuring the pollutant out of the air and collecting it as a wet slush. Wet dust collectors come in various shapes and sizes, which mean you will always have a wide range to browse through, before you treat your business to this necessary, luxury device. These are ideal systems for many industries and ...


    By ProVent, LLC

  • Keep your air clean with Wet Dust Collectors

    Wet dust collectors use liquid — often but not always simple water — to capture and separate dust, mist, fumes, and other particulate matter from a stream of flowing gas — often but not always simple air. Some wet dust collectors spray liquid in a sheet across the stream of gas; others bubble the gas through ...


    By ProVent, LLC

  • Uni-wash wet dust collectors reduce industrial dust hazards

    Metal dust — it can be a fabricator’s worst nightmare. In particular, the combination of dry aluminum dust and steel dust is literally a disaster waiting to happen. The National Fire Protection Association has a list of metal dusts and the specific PPM that the air can hold of each before the serious risk of an explosion arises. As a worksite approaches the PPM safety limits of one or ...


    By ProVent, LLC

  • Horween Leather: Whirl / Wet Dust Collector Combines a High Efficiency Wet Dust Collection with Low Maintenance and Operating Costs.

    For leather fines and other lightweight, porous materials, dry collection has been thought to be preferable to wet because of the material’s buoyancy. Horween Leather Company challenged that assumption. Originally, two baghouse systems collected particulate, but problems arose with each baghouse. First, cold winter dryness caused high levels of static electricity. Resultant sparks in the ducts ...


    By Tri-Mer Corporation

  • How a wet dust collector can prevent a violent explosion (and more!)

    Explosive dust is a major concern among metal finishing operations, and recent changes in the National Fire Protection Association regulations have made compliance more difficult. Metalwork grinding and sanding produces a fine metallic dust that, even after being filtered from the air, can smolder, catch fire, or even explode violently if it’s exposed to a spark. Aluminum, lithim, ...


    By ProVent, LLC

  • Whirl/Wet Dust Collectors Preferred for Pharmaceutical Overspray Collection

    A major multi-national manufacturer of pharmaceuticals and vaccines chose Whirl Wet technology for a new pill coating operation. The aqueous-based sugar solution created heavy loadings of sticky overspray in the 3 micron range. This blinded the existing baghouses after just six batches despite the use of PTFE cartridges – (the best available option for baghouses used in this type of application.) ...


    By Tri-Mer Corporation

  • Surrette Battery Co. Replaces Baghouse with Whirl Wet Dust Collector for Pasting Operation.

    Surrette Battery Company Limited, Springhill, Nova Scotia is a leading lead-acid battery manufacturer, and Canada's only independent battery manufacturer. The battery company manufactures long-life, true 'deep cycle' battery systems for railroad, marine, industrial and renewable energy applications. Surrette Battery wanted a corrosion-free system that would withstand acid fumes from a paste mixer ...


    By Tri-Mer Corporation

  • A Cyclone Dust Collector Case Study: Spaulding

    Spaulding Composites Corporation was founded in 1973 in Townsend, MA. The company began producing vulcanized rubber and fiberboard, with it’s chief clientele being the shoe industry. Today, the company produces a wide variety of high pressure laminates and composites for a myriad of markets including cryogenics, aerospace, health imaging, electricity generation and distribution, and water ...


    By ProVent, LLC

  • GM-Delphi: Whirl / Wet Combines High Efficiency Wet Dust Collection with Low Maintenance and Operating Costs

    Tri-Mer® dust collection technology has once again been selected by GM-Delphi. Four units were selected as replacements for dry collectors. Each unit serves four grinding (or shot blasting) stations. Capacities range from 425 to 52,500 cubic ft./minute. The units will accommodate very heavy loadings under continuous use, and allow regular maintenance without interrupting production. Equally ...


    By Tri-Mer Corporation

  • Hester Industries: Whirl / Wet Combines High Efficiency Wet Dust Collection with Low Maintenance and Operating Costs.

    Chicken processor Hester Industries bought a polypro Whirl/Wet to serve the breading operation at the company’s Moorefield, WV plant. The breading generated fugitive dust; the bag collectors originally installed to collect the sticky dust were not adequate to the task. The hygroscopic nature of the dust made the Whirl / Wet dust collector a cost-effective choice. Excess spice/flour dust is ...


    By Tri-Mer Corporation

  • Erickson Cosmetics: Whirl / Wet Combines High Efficiency Wet Dust Collection with Low Maintenance and Operating Costs.

    Production was accelerating at Erickson Cosmetics, a Chicago-based maker of talc and cornstarch-based products for the Mennen Division of Colgate-Palmolive and other companies. The 320,000 sq. ft. plant is highly automated and, while the primary powder line operated within regulatory guidelines for dust control, Todd Nelmark believed there were strong reasons to consider automatic dust ...


    By Tri-Mer Corporation

  • A Short FAQ On Oil Mist Collectors

    Oil mist collectors, much like wet dust collectors and cyclone dust collectors, are used in a huge variety of industrial grinding, cutting, induction hardening, induction heating, and other industrial applications — but information about these commonplace air cleaning tools is few and far between. Here’s a short FAQ for those who ...


    By ProVent, LLC

  • The Different Kinds of Dust Collection Booths

    Factories that produce heavy dust particles require a dust collector system in place, so employees can breathe in clean and pure air at all times. Also, with one of these systems in place, machinery functions well and lasts longer. Dust collection booths also help limit dust into a closed area and safely trap it inside a closed space for ...


    By ProVent, LLC

  • Efficient Dust Collection, Plus Product Recovery Benefit Fertilizer Manufacturer.

    Mears Fertilizer manufactures fertilizers and packages a recovered by-product, brine, for use as “ice melt.” Collecting dry fertilizer dusts from manufacturing and packaging operations is a major operations priority. Mears had used various types of dry “bag house” equipment, but results had been unsatisfactory. For a new installation, the company was determined to avoid bag houses. The area where ...


    By Tri-Mer Corporation

  • Whirl/Wet Is Ideal for Polishing Operations. Water Use Is Low. Unit Does Not Have External Pumps or Recirculation Systems, So Installation Out-of-Doors Is Possible.

    Gabilan Manufacturing, Inc. (Salinas, CA) produces all the mufflers used on Harley Davidson motorcycles. Quality is paramount: the polishing is preparation for chrome plating – arguably the most critical finishing process for high-end bikes. When new grinding and sanding equipment was installed, Gabilan considered several options for dust collection, finally choosing a cartridge system with spark ...


    By Tri-Mer Corporation

  • How do oil mist collectors work? Comparing the different technologies, part I

    There are multiple different physical mechanics used by the industrial tools referred to as “oil mist collectors. Over the next two entries, we’re going to take a look at the four most common technologies and why a business might want to use or avoid each one. Centrifugal Mist Collectors The first ...


    By ProVent, LLC

  • Controlling acid gas mists

    Gas cleaning New and strict pollution regulations in metallurgical plants worldwide are restricting particulate and acid gas emissions to extremely low levels. Because of that, sulphuric acid plants are being installed to remove and utilise S02 in gases resulting from the roasting of sulphide ores, smelting of ores, and burning or regeneration of spent acid or acid sludge from ...


    By Beltran Technologies, Inc.

  • Abrasives case study - Essroc Materials, Inc.

    Plugging, Surging and Wear-Through Virtually Eliminated by Smart Elbows® At Essroc Materials, Inc., formerly Coplay Cement, plugging and elbow wear in pneumatic conveying lines caused unnecessary downtime and repair expense. The Frederick, MD, facility is a wet-process cement plant that produces 350,000 to 400,000 tons of cement a year using two 400-foot-long rotary ...


    By HammerTek Corporation

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you