wet gas cleaning Articles

  • Wet Flue Gas Desulfurization System

    Installing the optimum wet flue gas desulfurization technology, B&V Energy is bringing superior multi-pollutant removal technology to the North American utility marketplace. To help make a positive impact on the global environment and to comply with the Clean Air Interstate and Clean Air Mercury Rules, Dayton Power & Light needed to remain in compliance as more stringent air quality ...


    By Black & Veatch Corporation

  • Keep your air clean with Wet Dust Collectors

    Wet dust collectors use liquid — often but not always simple water — to capture and separate dust, mist, fumes, and other particulate matter from a stream of flowing gas — often but not always simple air. Some wet dust collectors spray liquid in a sheet across the stream of gas; others bubble the gas through ...


    By ProVent, LLC

  • Dry/Wet Scrubbers for Clean Air Compliance

    Air-scrubbing venturis and towers may be the answer to clean air compliance for small- to medium-sized companies. Forthcoming requirements of the Clean Air Act Amendments of 1990 will inventory many more specific chemicals considered hazardous. From acetaldehyde to xylenes, the list regulated under the air taxies program includes 189 hazardous air pollutants (HAPs). That number may ...


    By CR Clean Air Group, LLC

  • Benefits of Hot Water Pressure Washers for Wet Steam Cleaning

    Hot pressure washers have revolutionized commercial cleaning processes. Roads, gas stations, boats, cars, airplanes, factory floors, basements, kitchens and similar areas can now be cleaned more easily than before. No longer are contractors depending exclusively on tedious methods such as trailers with rotary brushes to handle layers of grease and grime. Hot water pressure washers hold many ...


    By Daimer Industries Inc.

  • Wet electrostatic precipitators: A preferred technology for emission control

    The basic science behind electrostatic precipitators is as familiar and as simple as static cling. But today, this elemental force has been harnessed to a technology that is helping to remove millions of tons of toxic chemicals from our atmosphere; saving billions of dollars annually in pollution-related physical damage; and averting costly impacts on health and mortality rates for millions of ...


    By Beltran Technologies, Inc.

  • Innovative wet electrostatic precipitators assure competitive edge in acid marketplace

    The unsteady global economic recovery continues to subject many core industries to persistent volatility in profits, prices, markets and capital investments. However, some analysts remain optimistic about the global international trade in sulfur in all forms, particularly sulfuric acid. This versatile mineral acid is both the world’s most widely used chemical, and the one with the highest ...


    By Beltran Technologies, Inc.

  • Small Area Paint Removal Possible Only With Wet Sandblaster Pressure Washers

    Paint removal has always been a difficult task for cleaning workers and requires the use of robust machines that can remove paint from both large and small areas. Pressure washers are the ideal machines that can handle tasks like small area paint removal efficiently. The exceptional versatility and power of regular pressure washers has always been appreciated by professional cleaning experts. ...


    By Daimer Industries Inc.

  • Advanced WESP designs assure superior gas cleaning performance

    Nowadays, many industries are facing formidable environmental challenges and there is a growing need for effective, economical gas cleaning and air pollution control equipment. Michael Beltran of Beltran Technologies, Inc. reports on a renewed interest in high-efficiency wet electrostatic precipitators (WESPs) and discusses their importance for controlling sulphuric acid mists and other ...


    By Beltran Technologies, Inc.

  • Uni-wash wet dust collectors reduce industrial dust hazards

    Metal dust — it can be a fabricator’s worst nightmare. In particular, the combination of dry aluminum dust and steel dust is literally a disaster waiting to happen. The National Fire Protection Association has a list of metal dusts and the specific PPM that the air can hold of each before the serious risk of an explosion arises. As a worksite approaches the PPM safety limits of one or ...


    By ProVent, LLC

  • Chemical Industry: Wet Scrubbing HCL & SiCl4 Fumes Case Study

    This two-stage scrubbing system utilizes a jet venturi scrubber in conjunction with a counter current packed tower including entrainment mist eliminator. It was designed to eliminate the HCl (hydrochloric acid) fumes generated when SiC14 (silicon tetrachloride) comes in contact with moisture during processing operations at a zirconium processing tank farm, and also the remaining small amount of ...


    By CR Clean Air Group, LLC

  • Case study - Wet electrostatic precipitators offer cost-effective solution for HZL

    An array of complex air pollution issues places the metallurgical industry among the largest potential sources of pollutants, and one of the most tightly regulated industrial sectors. One fully integrated, nonferrous metal producer in India, however, is demonstrating that a company with a determined commitment to environmental protection, energy efficiency and sustainability can succeed in ...


    By Beltran Technologies, Inc.

  • The Influence of PVC on the Quantity and Hazardousness of Flue Gas Cleaning Residues from Incineration

    The study estimates the influence of PVC on the quantity and hazardousness of flue gas residues from incineration. The analysis has been carried out on both theoretical and practical terms. A distinction between dry, semi-dry and wet gas treatment systems has been made. The influence of PVC has been assessed on the combustion steps and therefore on the distribution of chlorine and other ...

  • Smelter gas cleaning one vessel from the quench to the drying tower

    Base metals such as zinc, lead and copper are all found in nature bound with sulphur as sulphite minerals: sphalerite (ZnS), galena (PbS), several copper minerals, silver (found as acanthite Ag2S), and, along with other precious metals. Processing of the metals invariably leads to sulphur dioxide (SO2) formation. Other metal processing, such as aluminum from bauxite ore [Al(OH)3] which contains ...


    By Kimre, Inc.

  • New fertilizer industry gas cleaning technology achieves lower required emission levels

    All fertilizer plants produce dust and gases, such as ammonia (NH3) and acid fumes, which must be removed at very high efficiencies before venting to atmosphere. Familiar examples are granulation and prilling of nitrogenous products such as Urea which is the most widely used fertilizer in the world(1). Phosphatic fertilizer production produces dust and Fluorine compounds. Typical air treatment ...


    By Kimre, Inc.

  • Case study - Beltran WESPs deliver superior gas cleaning performance for Zambia’s fast-growing copper industry

    The central importance of copper production to the Zambian economy is reflected in the fact that the value of copper exports in 2010, about $5.8 billion, accounted for 78 percent of the country’s total merchandise export earnings, and helped make it the seventh largest producer in the world. Capitalizing on a worldwide surge in copper prices and the coincident privatization of ...


    By Beltran Technologies, Inc.

  • A breath of fresh air - Wet scrubbing eliminates odors associated with processing discarded liquid from cheese manufacturing

    When International Ingredient Corp.’s drying plant in Monroe, WI, opened in 1994, it was the first plant designed specifically for large-scale drum drying of dairy products for the feed industry. At that time, its only neighbor was a cheese producer. International Ingredient used a land spread technique to process the discarded liquids resulting from its neighbor’s cheese ...


    By Bionomic Industries Inc.

  • A breath of fresh air - Wet scrubbing eliminates odors associated with processing discarded liquid from cheese manufacturing.

    When International Ingredient Corp.’s drying plant in Monroe,WI, opened in 1994, it was the first plant designed specifically for large-scale drum drying of dairy products for the feed industry.At that time, its only neighbor was a cheese producer. International Ingredient used a land spread technique to process the discarded liquids resulting from its neighbor’s cheese manufacturing process. ...


    By Bionomic Industries Inc.

  • Controlling acid gas mists

    Gas cleaning New and strict pollution regulations in metallurgical plants worldwide are restricting particulate and acid gas emissions to extremely low levels. Because of that, sulphuric acid plants are being installed to remove and utilise S02 in gases resulting from the roasting of sulphide ores, smelting of ores, and burning or regeneration of spent acid or acid sludge from ...


    By Beltran Technologies, Inc.

  • TB 41: Activated water for improved megasonic cleaning

    New processes for wet cleaning semiconductor surfaces have recently been developed. The new cleaning processesare designed to be more environmentally friendly and reduce the volume of chemicals used. One such process(1) has been developed in Japan by Professor Ohmi and his researchers at Tohoku University. This cleaning process uses dissolved gasses and megasonic irradiation to remove particles, ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you