wind monitor Articles

  • Ferrography Made Easy With The FerroCheck 2000

    The measurement and trending of abnormal ferrous wear debris in machinery lubrication oils is arguably the most significant indicator of machinery health and a key predictor of catastrophic machinery failure. There are several methods available to measure the ferrous content of lubrication oil. ...


    By Spectro Scientific

  • 100 Simple Ways To Save Water

    To improve water conservation install a rain sensor, it turns off your irrigation when it rains. Use a weather-based controller. The use of smart controllers can reduce water usage 24% a year on average. Learn about available rebate programs ...


    By Jain Irrigation, Inc

  • Solar/wind power for noise monitoring terminals

    Solar Power Solutions A noise monitoring terminal’s (NMT) low power consumption and its ability to operate fully without power hungry cooling and heating units inside its enclosure mean that it is suitable for power from solar panels. The NMT may be continuously powered by battery which in turn is kept charged via solar energy. This solution is most appropriate in areas where there ...

  • Amassing Wind Information

    Wind is a variable resource, but not an indecipherable one. Second Wind encourages harnessing the full range of wind sensing technologies that are available today. When it comes to wind information, much attention is focused on the choice of wind measurement technology and data collection practices in wind resource assessment and project design. Right now, wind data plays a limited role in the ...


  • Weather claims and wind safety

    Anybody working in the construction industry either here in the UK or anywhere else in the world is likely to know that the weather can present us with particular hazards. While rain, ice and snow are particularly dangerous to work in, we must always be aware that the wind is also likely to make conditions unsafe, particularly for those who work at height and those who ...

  • New methods for measuring the wind

    Although computer models of wind flow over terrain have improved dramatically in the past few years, there is still no substitute for data recorded at the site. So you want to build a wind farm. Good for you. With the global drive towards a low carbon economy, it is surely the right way to go for many individuals, companies and, indeed, Governments around the world. As information from the ...


  • Wind turbine controlling of the future

    Higher, more robust, more reliable: Parallel to the growing requirements for wind turbines, the requirements for monitoring sensors grow as well. But how can wind sensor manufacturers fulfil these wishes? And how should a future wind sensors look like? After analysing the current conditions and trends on the wind energy market, our CEO Klaus Hirzel compiled a wish list for future wind sensors. ...

  • Dust monitoring

    Generally, two different approaches are used to measure the amount of dust deposited on a surface; Determination of the soiling of a surface, by a change in its properties; Determination of the quantity of dust deposited, by weight. WHAT IS DUST? Dust is a generic term used to describe fine particles that are suspended in the atmosphere. Dust comes from a wide variety of sources, including soil, ...


    By Queensland Laboratory

  • A review of wind energy developments in India

    Climate change, dwindling reserves of fossil fuels and shortage of electricity have prompted the government to give an impetus to renewable energy sources. Wind energy, with an average growth rate of 30%, is the fastest growing source of renewable energy in the world. India has a potential capacity of over 45,000 MW out of which 1869 MW has been extracted from this eco-friendly source. India ...


    By Inderscience Publishers

  • Intrinsically safe ultrasonic wind sensor

    The Gill Instruments Intrinsically Safe WindObserver™ is an ultrasonic wind sensor, developed specifically for use in hazardous areas and in particular for offshore applications. The sensor has no moving parts, utilising Gill Instruments’ advanced ultrasonic measurement technology to accurately monitor wind speed and direction. Approved to EEx ia IIC T5, this ultrasonic wind sensor is a ...


    By Gill Instruments Limited

  • On the application of miniSoDAR technology to wind energy

    Introduction In the late 1990’s wind turbines with nacelle heights exceeding 60 meters were introduced to the wind energy community. Initially, wind prospecting and siting studies continued to use 50-meter wind towers and extrapolate the measurement to the nacelle heights. It was quickly determined that this approach was not sufficient for the placement of these tall turbines. The next ...

  • Are wind turbines economically viable in Britain?

    If Britain establishes wind energy as their main energy source, they will be able to create a large number of new job opportunities. This can provide a huge influx of job opportunities in the short run since the implementation of wind turbines require a lot of manpower. Moreover, the maintenance of these wind farms can give life to a considerable amount of sustainable jobs. Monitoring the wind ...


    By Stanford Magnets

  • Energy and exergy assessments for potential wind power in Turkey

    The main objective of the study is to estimate wind power potential of Turkey and provide suitable data for evaluating potential wind power by using the wind data collected at 23 different wind-monitoring stations. In this study, energy and exergy analyses of wind power are used to estimate wind power potential in these areas. Exergy analysis of wind power is investigated according to air ...


    By Inderscience Publishers

  • On storm surges induced by the Bora wind in the Lagoon of Venice

    It is well known that the hydrodynamics of the Venice Lagoon is strongly dependent upon both tides and prevalent wind regimes, namely the Sirocco and the local wind Bora. However, while the effect of the Sirocco on the sea level has been an subject of a large number of experimental and theoretical studies because of its dramatic impact on Venice, less attention has been paid to the effect on the ...


    By Inderscience Publishers

  • Palmdale Water District Wind Turbine Project

    In response to the 2001 California energy crisis, Black & Veatch acted as the owner's engineer through the construction and commissioning phases of the largest net-metered wind energy project in the United States. The California energy crisis in 2001 made headlines around the world. The country's most populous state was caught in a power delivery squeeze and was beset with runaway ...


    By Black & Veatch Corporation

  • How Accurate is Your Monitor?

    When you consider the many regulations and guidelines that health and safety officers and first responders are faced with, it is amazing they maintain the ability to detect such a wide variety of hazardous pollutants and toxic agents.  There is no lack of regulations governing how to monitor chemical compounds, and the list grows longer all the time.  New standards for portable gas ...

  • Innovation risk slows offshore wind foundation development

    As offshore wind technology develops ever more gigantic machines further from shore into deeper waters, it is common wisdom that new foundation technologies are needed. But are they? Monopile, and some jacket foundations, still dominate the offshore wind market in commercial operation. Prototype floating foundations are performing well in demo or pilot projects, but scaling up is only ...

  • CU-Boulder leading study of wind turbine wakes

    While wind turbines primarily are a source of renewable energy, they also produce wakes of invisible ripples that can affect the atmosphere and influence wind turbines downstream -- an issue being researched in a newly launched study led by the University of Colorado Boulder's Julie Lundquist, assistant professor in the atmospheric and oceanic sciences department. The study, called the Turbine ...


  • Weather Data for Noise Monitoring

    “Weather conditions are the single largest variable factor in how sound travels over large distances,” says Steve Bilawchuk principal partner and engineer at ACI Acoustical Consultants Inc. “Wind speed and wind direction are of crucial importance.” ACI is an acoustical engineering consulting company based in Alberta, Canada, which uses ...

  • Area Monitoring: Diffusion Sampling

    Indoor and outdoor gas hazards that exist in open areas are usually monitored using diffusion-type sensors. A diffusion sensor has no active sample-drawing system; diffusion sensors rely on the ambient air movement and pressure to deliver the sample to the sensing element. Diffusion-type sensors are a reliable and cost-effective way to monitor open area gas hazards. When installing diffusion ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you