wind monitoring Articles

  • Solar/wind power for noise monitoring terminals

    Solar Power Solutions A noise monitoring terminal’s (NMT) low power consumption and its ability to operate fully without power hungry cooling and heating units inside its enclosure mean that it is suitable for power from solar panels. The NMT may be continuously powered by battery which in turn is kept charged via solar energy. This solution is most appropriate in areas where there ...

  • New methods for measuring the wind

    Although computer models of wind flow over terrain have improved dramatically in the past few years, there is still no substitute for data recorded at the site. So you want to build a wind farm. Good for you. With the global drive towards a low carbon economy, it is surely the right way to go for many individuals, companies and, indeed, Governments around the world. As information from the ...


  • Amassing Wind Information

    Wind is a variable resource, but not an indecipherable one. Second Wind encourages harnessing the full range of wind sensing technologies that are available today. When it comes to wind information, much attention is focused on the choice of wind measurement technology and data collection practices in wind resource assessment and project design. Right now, wind data plays a limited role in the ...


  • Weather claims and wind safety

    Anybody working in the construction industry either here in the UK or anywhere else in the world is likely to know that the weather can present us with particular hazards. While rain, ice and snow are particularly dangerous to work in, we must always be aware that the wind is also likely to make conditions unsafe, particularly for those who work at height and those who ...

  • Dust monitoring

    Generally, two different approaches are used to measure the amount of dust deposited on a surface; Determination of the soiling of a surface, by a change in its properties; Determination of the quantity of dust deposited, by weight. WHAT IS DUST? Dust is a generic term used to describe fine particles that are suspended in the atmosphere. Dust comes from a wide variety of sources, including soil, ...


    By Queensland Laboratory

  • Intrinsically safe ultrasonic wind sensor

    The Gill Instruments Intrinsically Safe WindObserver™ is an ultrasonic wind sensor, developed specifically for use in hazardous areas and in particular for offshore applications. The sensor has no moving parts, utilising Gill Instruments’ advanced ultrasonic measurement technology to accurately monitor wind speed and direction. Approved to EEx ia IIC T5, this ultrasonic wind sensor is a ...


    By Gill Instruments Limited

  • Energy and exergy assessments for potential wind power in Turkey

    The main objective of the study is to estimate wind power potential of Turkey and provide suitable data for evaluating potential wind power by using the wind data collected at 23 different wind-monitoring stations. In this study, energy and exergy analyses of wind power are used to estimate wind power potential in these areas. Exergy analysis of wind power is investigated according to air ...


    By Inderscience Publishers

  • On storm surges induced by the Bora wind in the Lagoon of Venice

    It is well known that the hydrodynamics of the Venice Lagoon is strongly dependent upon both tides and prevalent wind regimes, namely the Sirocco and the local wind Bora. However, while the effect of the Sirocco on the sea level has been an subject of a large number of experimental and theoretical studies because of its dramatic impact on Venice, less attention has been paid to the effect on the ...


    By Inderscience Publishers

  • Weather Data for Noise Monitoring

    “Weather conditions are the single largest variable factor in how sound travels over large distances,” says Steve Bilawchuk principal partner and engineer at ACI Acoustical Consultants Inc. “Wind speed and wind direction are of crucial importance.” ACI is an acoustical engineering consulting company based in Alberta, Canada, which uses ...

  • Area Monitoring: Diffusion Sampling

    Indoor and outdoor gas hazards that exist in open areas are usually monitored using diffusion-type sensors. A diffusion sensor has no active sample-drawing system; diffusion sensors rely on the ambient air movement and pressure to deliver the sample to the sensing element. Diffusion-type sensors are a reliable and cost-effective way to monitor open area gas hazards. When installing diffusion ...

  • How Accurate is Your Monitor?

    When you consider the many regulations and guidelines that health and safety officers and first responders are faced with, it is amazing they maintain the ability to detect such a wide variety of hazardous pollutants and toxic agents.  There is no lack of regulations governing how to monitor chemical compounds, and the list grows longer all the time.  New standards for portable gas ...

  • New Condition Monitoring Frame Agreement

    Arise Windpower and Brüel & Kjær Vibro enter into a frame agreement for remote condition monitoring of wind turbines Arise Windpower are very pleased to have entered into a Frame Agreement with Brüel & Kjær Vibro for the supply of condition monitoring solutions for wind turbine applications. "We believe that using one common condition monitoring system ...


    By Brüel & Kjær Vibro GmbH

  • Hourly NOx concentrations and wind direction in the vicinity of a street intersection

    This study relates NOxconcentrations and wind (speed and direction) measured inside an asymmetric street canyon, with ambient wind. The monitoring site is located near a street intersection. The wind measured at the domestic airport located in the city, near the coast, has been considered as ambient wind. Wind direction at the monitoring site inside the canyon is mainly from the E, NE, W and NW ...


    By Inderscience Publishers

  • Finite element analysis of turbine generator rotor winding shorted turns

    Abstract Online magnetic flux monitoring via permanently installed air-gap flux probes is a well- established technology to determine the presence of shorted turns in a turbine generator rotor winding. Flux measurements are normally performed using flux probes installed in the machine air gap (on a stator wedge) and connected to portable or permanently installed instruments. In this ...

  • What is Long Term Noise Monitoring?

    It might sound simple, but long term noise monitoring can mean different things to different people. There is no standard definition for what long term noise monitoring is, but here is a summary that covers the basics. I first presented this presentation at the IOA Eastern Branch meeting and wanted to share my thoughts on what classes as long term noise monitoring. I’ll also discuss ...


    By Cirrus Environmental

  • Integrated solar and wind energy powers oil recovery system

    Recovery of free-product petroleum at the former St. Croix Alumina (SCA) site in Kingshill on St. Croix, VI, is addressing ground-water contamination caused by past releases of fuel and refined petroleum at SCA. The oil recovery system employs wind-driven turbine compressors (WTCs), wind-driven electric generators (WEGs), and photovoltaic (PV) panels to power pneumatic and electric submersible ...

  • Construction and Civil Infrastructures Monitoring Systems

    Civil infrastructures are usually monitored through its whole life cycle. SHM (Structural Health Monitoring) technologies enable the estimation of the structural state and detection of structural change that affects the performance of a structure. Two discriminating factors in SHM are the time-scale of the change (how quickly the state changes) and the severity of the change. These factors ...

  • System for detection of excitation winding shorted turns in hydro generators

    Abstract This article describes a specific instrument for detection of excitation winding shorted turns in hydro generators, developed in Koncar - Electrical Engineering Institute Inc., called Hydro generator Winding Fault Detection (HO WFD). This instrument is a part of the Institute's product line used for monitoring and diagnosis of rotating electrical ...

  • Wind-driven SVE system extracts VOCs from landfill

    An innovative soil vapor extraction (SVE) system has operated at the former Ferdula Landfill site in Frankfort, NY, for the past 10 years. The system relies on wind-driven vacuum processes rather than electrically powered air blowers to extract volatile organic compounds (VOCs) from the landfill. After a two-year trial beginning in 1998, the New York State Department of Environmental Conservation ...

  • Real-time environmental monitoring of the Great Barrier Reef

    The Great Barrier Reef (GBR) is the largest natural feature on earth, stretching more than 2300 km along the northeast coast of Australia. It contains a diverse array of species and habitats that are threatened by environmental and human impacts. Monitoring environmental changes would give a better understanding of the health of this ecological system. It would also help shape decision-making to ...


    By Inderscience Publishers

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you