wind monitoring instrument Articles

  • Gill Instruments case study featured in AWE International

    AWE International magazine, which is focused on the environmental analysis industry, recently featured Gill Instruments in a case study about environmental monitoring with solid-state meteorological instruments. The case study includes information about all of the products within the Gill Instruments range, with information about their advantages within the environmental analysis field. We have ...


    By Gill Instruments Limited

  • Intrinsically safe ultrasonic wind sensor

    The Gill Instruments Intrinsically Safe WindObserver™ is an ultrasonic wind sensor, developed specifically for use in hazardous areas and in particular for offshore applications. The sensor has no moving parts, utilising Gill Instruments’ advanced ultrasonic measurement technology to accurately monitor wind speed and direction. Approved to EEx ia IIC T5, this ultrasonic wind sensor is a ...


    By Gill Instruments Limited

  • On the application of miniSoDAR technology to wind energy

    Introduction In the late 1990’s wind turbines with nacelle heights exceeding 60 meters were introduced to the wind energy community. Initially, wind prospecting and siting studies continued to use 50-meter wind towers and extrapolate the measurement to the nacelle heights. It was quickly determined that this approach was not sufficient for the placement of these tall turbines. The next ...

  • How Accurate is Your Monitor?

    When you consider the many regulations and guidelines that health and safety officers and first responders are faced with, it is amazing they maintain the ability to detect such a wide variety of hazardous pollutants and toxic agents.  There is no lack of regulations governing how to monitor chemical compounds, and the list grows longer all the time.  New standards for portable gas ...

  • CU-Boulder leading study of wind turbine wakes

    While wind turbines primarily are a source of renewable energy, they also produce wakes of invisible ripples that can affect the atmosphere and influence wind turbines downstream -- an issue being researched in a newly launched study led by the University of Colorado Boulder's Julie Lundquist, assistant professor in the atmospheric and oceanic sciences department. The study, called the Turbine ...


  • Innovation risk slows offshore wind foundation development

    As offshore wind technology develops ever more gigantic machines further from shore into deeper waters, it is common wisdom that new foundation technologies are needed. But are they? Monopile, and some jacket foundations, still dominate the offshore wind market in commercial operation. Prototype floating foundations are performing well in demo or pilot projects, but scaling up is only ...

  • Area Monitoring: Diffusion Sampling

    Indoor and outdoor gas hazards that exist in open areas are usually monitored using diffusion-type sensors. A diffusion sensor has no active sample-drawing system; diffusion sensors rely on the ambient air movement and pressure to deliver the sample to the sensing element. Diffusion-type sensors are a reliable and cost-effective way to monitor open area gas hazards. When installing diffusion ...

  • System for detection of excitation winding shorted turns in hydro generators

    Abstract This article describes a specific instrument for detection of excitation winding shorted turns in hydro generators, developed in Koncar - Electrical Engineering Institute Inc., called Hydro generator Winding Fault Detection (HO WFD). This instrument is a part of the Institute's product line used for monitoring and diagnosis of rotating electrical ...

  • Finite element analysis of turbine generator rotor winding shorted turns

    Abstract Online magnetic flux monitoring via permanently installed air-gap flux probes is a well- established technology to determine the presence of shorted turns in a turbine generator rotor winding. Flux measurements are normally performed using flux probes installed in the machine air gap (on a stator wedge) and connected to portable or permanently installed instruments. In this ...

  • What is Long Term Noise Monitoring?

    It might sound simple, but long term noise monitoring can mean different things to different people. There is no standard definition for what long term noise monitoring is, but here is a summary that covers the basics. I first presented this presentation at the IOA Eastern Branch meeting and wanted to share my thoughts on what classes as long term noise monitoring. I’ll also discuss ...


    By Cirrus Environmental

  • Monitoring greenhouse gases from biofuel crops

    Global issues such as climate change and energy security have driven rapid growth in renewable energy production - wind, solar, tidal, geothermal, hydro, biofuels etc. However, logically, each of these methods should deliver a net benefit in terms of greenhouse gas (GHG) reduction, so researchers in the United States have employed portable FTIR analysers to study the GHG emissions of biomass ...


    By Gasmet Technologies Oy

  • Smart PV Monitoring with smart Weather Stations

    Goodbye Cable Clutter, Hello All-In-One Weather Sensors: Lufft is proof of the fact that professional measurement technology does not always have to be complicated. With our experience in weather sensor manufacturing we are the first to offer modular, all-in-one weather sensors for the solar energy industry that require only a single cable connection. Everything you need for solar monitoring is ...

  • Online Odors Monitoring in Waste Water Treatment Plants

    Odors are very distinct air contaminants as they generate nuisances (see note at the end). The factors playing a role in the determination of odor annoyance are : odor concentration and intensity, frequency, appreciation, duration, synergy and location. Chromatotec proposes an automated solution to well identify the origin and the level of odors. Technology Description We offer a ...


    By Chromatotec Group

  • Monitoring network for Scottish ports - Case Studies

    Historically, ferry masters operating off the west coast of Scotland would have to sail to a port and on arrival visually assess the weather and tide conditions before deciding whether safe berthing alongside the pier or quayside would be possible. This wastes time and fuel, and can causes immense frustration among passengers, who may see ferries come close to a port, but thereafter depart ...

  • Designing and Implementing Perimeter Air Monitoring Programs

    Perimeter or fenceline ambient air quality and meteorological monitoring programs have become increasingly valuable at hazardous waste, landfill, dredging, ports, and MGP remediation sites. Air quality monitoring programs protect public health and reduce owner liability ...


    By AECOM

  • Continuous, Centralized Monitoring Drives O&M Optimization

    In a survey conducted by Wind Energy Update this year, 80% of wind turbine owners indicated they take either a predictive or preventative approach to maintenance. Furthermore, 77% indicated that they deploy Condition Monitoring Systems (CMS). “If you can leverage data to increase plant performance by even 1%, you are looking at significant impacts to your revenue”, EDF’s ...

  • Monitoring mixing dynamics in Toolik Lake, Alaska

    Toolik Lake is 130 miles south of Prudhoe Bay in northern Alaska. It is one of the main monitoring sites of the Arctic Long-Term Ecological Research (LTER) project and a site for studies led by Sally MacIntyre of the University of California investigating the linkages between hydrodynamics and ecosystem function. Both studies are funded by the U.S. National Science Foundation. It is classified as ...

  • Long-term noise monitoring – how a new approach leads to a better result

    Good Neighbours Limit their Noise Impact Long-term noise monitoring has taken place in various applications for many years. Business such as airports, power stations, refineries, mines, etc., may be required to perform continuous noise monitoring to ensure legal operating conditions are not breached, and to demonstrate to local authorities and communities that the business continues to be a good ...

  • Noise monitoring system appeals to Reno-Tahoe Airport`s neighbours

    Noise monitoring and reduction has been top priority for Krys Bart ever since she took the helm of the Reno-Tahoe Airport Authority (RTAA) a decade ago. As RTAA president and CEO, Bart wants Reno-Tahoe International Airport to be a ‘good neighbour’, as it serves more than 4.4 million domestic and international passengers each year. The airport’s location right in the centre of ...

  • Port of London Authority Tidal Monitoring System - POLATIDE 5: Detailed - Case Study

    Introduction: Valeport and OceanWise have designed and delivered a complete tidal monitoring system, including tide gauges, telemetry equipment, servers, databases, system control, data management and display software, to the Port of London Authority. The system was installed in October 2013 and rigorous testing completed in February 2014.  Background: ...


    By Valeport Ltd

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you